EBYTE ME31 Network IO Networking Module

 

Ƙarsheview

Gabatarwar Samfur
ME31-XXAX0060 sanye take da 6-way A-nau'in relay fitarwa, kuma yana goyan bayan Modbus TCP yarjejeniya ko Modbus RTU yarjejeniya don saye da sarrafawa. A lokaci guda kuma, na'urar ita ma tsarin sadarwar I/O ce ta hanyar sadarwa wacce za a iya amfani da ita azaman ƙofa mai sauƙi na Modbus (aika umarni ta atomatik tare da adiresoshin Modbus waɗanda ba na gida ba ta hanyar tashar tashar jiragen ruwa / hanyar sadarwa).

Siffofin Aiki

• Goyan bayan ƙa'idodin Modbus RTU da Modbus TCP yarjejeniya;
• Taimakawa software daban-daban na daidaitawa / PLC / allon taɓawa;
• RS485 ikon mallakar I / O;
• RJ45 iko iko I / O, goyan bayan hanyar 4-hanyar mai masaukin baki;
• Taimakawa nunin OLED don nuna bayanin matsayi, da kuma saita sigogi na na'ura ta maɓalli;
• 6-hanyar sauyawa fitarwa DO (A-type relay);
• Sauyawa fitarwa (DO) yana goyan bayan yanayin matakin, yanayin bugun jini, yanayin bi, yanayin bi baya, yanayin juyawa;
• Goyan bayan saitunan adireshin Modbus na al'ada;
• Taimakawa 8 daidaitattun ƙimar baud na kowa;
• Taimakawa DHCP da IP na tsaye;
• Goyan bayan aikin DNS, ƙudurin sunan yanki;
• Goyan bayan aikin ƙofar Modbus;

 Zane-zane na Aikace-aikacen Samfurin Topology 

Amfani da sauri

【Lura】 Wannan gwajin yana buƙatar yin shi tare da ma'aunin masana'anta na asali.

Shirye-shiryen na'ura
Tebu mai zuwa ya lissafa abubuwan da ake buƙata don wannan gwajin:

 Haɗin na'ura 

 Bayani na RS485 

Lura: Lokacin da aka watsa siginar babban mitar bas 485, siginar siginar ya fi guntu layin watsawa, kuma siginar za ta samar da igiyar haske a ƙarshen layin watsawa, wanda zai tsoma baki tare da siginar asali. Sabili da haka, wajibi ne a ƙara resistor ta ƙarshe a ƙarshen layin watsawa don kada siginar ya yi tunani bayan ya kai ƙarshen layin watsawa. Matsakaicin tsayin daka ya kamata ya zama daidai da rashin daidaituwa na kebul na sadarwa, ƙimar ƙima shine 120 ohms. Ayyukansa shine ya dace da rashin ƙarfi na bas da inganta hana tsangwama da amincin sadarwar bayanai.

 Haɗin fitarwa na relay 

 Sauƙaƙan amfani 

• Waya: Ana haɗa kwamfutar da haɗin RS485 na ME31-XXAX0060 ta USB zuwa RS485, A kuma haɗa shi da A, kuma B yana haɗa da B.
• Sadarwar sadarwaSaka kebul na cibiyar sadarwa a cikin tashar RJ45 kuma haɗa zuwa PC.
• Ƙarfi wadata: Yi amfani da wutar lantarki ta DC-12V (DC 8 ~ 28V) zuwa ikon ME31-XXAX0060.

Kanfigareshi
Mataki 1: Gyara adireshin IP na kwamfutar don dacewa da na'urar. Anan zan canza shi zuwa 192.168.3.100 don tabbatar da cewa yana kan sashin cibiyar sadarwa iri ɗaya da na'urar kuma IP ɗin ya bambanta. Idan ba za ka iya haɗawa da na'urar ba bayan matakan da ke sama, da fatan za a kashe Tacewar zaɓi kuma sake gwadawa;

Mataki 2: Buɗe mataimakin cibiyar sadarwa, zaɓi abokin ciniki na TCP, shigar da mai watsa shiri mai nisa IP192.168.3.7 (tsohuwar siga), shigar da lambar tashar jiragen ruwa 502 (tsohuwar siga), kuma zaɓi HEX don aikawa.

Gwajin Sarrafa 

Modbus TCP iko
Yi amfani da mataimakin cibiyar sadarwa don sarrafa farkon DO fitarwa na ME31-XXAX0060.

Ana iya gwada wasu ayyuka ta hanyar umarni a cikin tebur da ke ƙasa.

Aiki (lambar aiki)	Umurni
Ja a cikin coil na farko (0x05)	01 00 00 00 00 06 01 05 00 00 FF 00
Cikakken umarnin buɗewa (0x0F)	02 00 00 00 00 08 01 0F 00 00 00 06 01 3 XNUMXF
Cikakken umarnin kusa (0x0F)	02 00 00 00 00 08 01 0F 00 00 00 06 01 00 XNUMX
Karanta duk matsayin DO (0x01)	01 00 00 00 00 06 01 01 00 00 00 06

 Modbus RTU iko
Yi amfani da mataimakan tashar tashar jiragen ruwa don sarrafa fitowar DO ta farko na ME31-XXAX0060.

Ana iya gwada wasu ayyuka ta hanyar umarni a cikin tebur da ke ƙasa.

Aiki (lambar aiki)	Umurni
Ja a cikin coil na farko (0x05)	01 05 00 00 FF 00 8C 3A
Cikakken umarnin buɗewa (0x0F)	01 0F 00 00 00 06 01 3F DF 46
Cikakken umarnin kusa (0x0F)	01 0F 00 00 00 06 01 00 9F 56
Karanta duk matsayin DO (0x01)	01 01 00 00 00 06 BC 08

Ƙayyadaddun Fasaha

Ƙayyadaddun bayanai

Kashi	Suna	Siga
Tushen wutan lantarki	Mai aiki Voltage	DC8 ～ 28V
	Alamar wuta	Blue LED nuni
Serial tashar jiragen ruwa	Sadarwar Sadarwa	RJ45, RS485
	Baud darajar	9600bps (mai iya canzawa)
	Yarjejeniya	Standard Modbus TCP, Modbus RTU yarjejeniya
MODBUS	Adireshin na'ura	Za'a iya canza shi ta hanyar Modbus umarni da mai sarrafa kwamfuta
YI fitarwa	Adadin tashoshin DO	6 hanya
	DO nau'in fitarwa	Form A relay
	DO yanayin fitarwa	Fitowar matakin, fitarwar bugun jini
	Relay lamba damar	30V/5A, 250V/5A
	Alamar fitarwa	Nunin allo na OLED, nunin LED ja
Sauran	Girman samfur	121mm * 72mm * 34mm (L*W*H)
	Nauyin samfur	150 ± 5 g
	Aikin zafin jiki da zafi	-40 ℃ + 85 ℃ , 5% - 95% RH (babu ruwa)
	Yanayin ajiya da zafi	-40 ℃ + 105 ℃ , 5% - 95% RH (babu ruwa)
	Hanyar shigarwa	Din-dogon shigarwa

Tsoffin Ma'aunin Na'ura

Kashi	Suna	Siga
Ethernet sigogi	Yanayin aiki	Sabar TCP (har zuwa hanyar abokin ciniki ta hanyar 4)
	IP na gida	192.168.3.7
	tashar jiragen ruwa na gida	502
	Subnet mask	255.255.255.0
	Adireshin ƙofa	192.168.3.1
	DHCP	Kusa

	MAC ta asali	An ƙaddara ta guntu (kafaffen)
	Target IP	192.168.3.3
	Target tashar jiragen ruwa	502
	uwar garken DNS	114.114.114.114
	Loda mai aiki	Kusa
Serial sigogi	Baud darajar	9600bps (nau'ikan 8)
	Duba hanya	Babu (tsoho), Odd, Ko
	Bayanin bayanai	8
	Dakatar kadan	1
MODBUS siga	Modbus master-bawa	Bawa
	Adireshi	1

 Zane Girman Injini 

Bayanin tashar jiragen ruwa da alamar haske 

A'a.	Lakabi	Misali
1	TX (LED)	Serial tashar jiragen ruwa aika data nuna haske
2	RX (LED)	Serial tashar jiragen ruwa yana karɓar haske mai nuna bayanai
3	LINK (LED)	Hasken haɗin yanar gizo
4	NET (LED)	Aika bayanan cibiyar sadarwa da karɓar hasken nuni
5	PWR (LED)	Alamar shigar da wutar lantarki
6	DO1 (LED)	Alamar fitarwa ta farko
7	DO2 (LED)	Alamar fitarwa ta relay na biyu
8	DO3 (LED)	Mai nuna fitarwa na relay na uku
9	DO4 (LED)	Alamar fitarwa ta relay na huɗu
10	DO5 (LED)	Alamar fitarwa ta gudun ba da sanda ta biyar
11	DO6 (LED)	Mai nuna fitarwa na relay na shida
12	GND	Pole mara kyau na tashar shigar da wutar lantarki, DC 8V~28V, 5.08mm tashar tashar Phoenix.
13	VCC	Ingantacciyar sandar tashar shigar wutar lantarki, DC 8V~28V, 5.08mm tashar tashar Phoenix.
14	NO1	Relay 1 kullum bude fil, ana amfani da shi tare da relay 1 gama gari, 5.08 mm Phoenix m.

15	COM1	Matsakaicin gama gari na relay 1, wanda aka yi amfani da shi tare da madaidaicin buɗaɗɗen pinof relay 1, 5.08mm tashar tashoshin Phoenix.
16	NO2	Relay 2 kullum bude fil, ana amfani da shi tare da relay 2 gama gari, 5.08mmPhoenix m.
17	COM2	Matsakaicin gama gari na relay 2, wanda aka yi amfani da shi tare da madaidaicin buɗaɗɗen pinof relay 2, 5.08mm tashar tashoshin Phoenix.
18	NO3	Relay 3 kullum bude fil, ana amfani da shi tare da relay 3 gama gari, 5.08mmPhoenix m.
19	COM3	Matsakaicin gama gari na relay 3, wanda aka yi amfani da shi tare da madaidaicin buɗaɗɗen pinof relay 3, 5.08mm tashar tashoshin Phoenix.
20	NO4	Relay 4 kullum bude fil, ana amfani da shi tare da relay 4 gama gari, 5.08mmPhoenix m.
21	COM4	Relay 4 gama gari, wanda aka yi amfani da shi tare da relay 4 kullum buɗaɗɗen fil, 5.08mmPhoenix m.
22	Ethernet	Ethernet dubawa, daidaitaccen dubawar RJ45.
23	COM6	Matsakaicin gama gari na relay 6, wanda aka yi amfani da shi tare da madaidaicin buɗaɗɗen pinof relay 6, 5.08mm tashar tashoshin Phoenix.
24	NO6	Relay 6 kullum bude fil, ana amfani da shi tare da relay 6 gama gari, 5.08mmPhoenix m.
25	COM5	Matsakaicin gama gari na relay 5, wanda aka yi amfani da shi tare da madaidaicin buɗaɗɗen pinof relay 5, 5.08mm tashar tashoshin Phoenix.
26	NO5	Relay 5 kullum bude fil, ana amfani da shi tare da relay 5 gama gari, 5.08mmPhoenix m.
27	GND	Ƙasar sigina, 5.08mm tashar tashar Phoenix.
28	485-A	An haɗa A na serial tashar jiragen ruwa zuwa A dubawa na waje na'urar, da kuma 5.08mm Phoenix m.
29	485-B	B na serial tashar jiragen ruwa an haɗa zuwa B dubawa na waje na'urar, da kuma 5.08mm Phoenix m.

 Gabatarwar Ayyukan Samfur

YI fitarwa
Yanayin fitarwa: fitarwa na yanayi daban-daban bisa ga yanayin da mai amfani ya saita, kuma ana kunna fitowar matakin ta tsohuwa.

 Ƙididdigar shigarwa
Goyan bayan ƙidayar shigarwar DI, masu amfani za su iya saita haɓakar haɓakar haɓaka, faɗuwar saye, da siyan matakin gwargwadon bukatunsu. Hakanan zaka iya canza hanyar sharewa gwargwadon bukatunku.

Hanyar tayar da hankali:

• Rising Gefen: Idan aka tattara gefen tashi (ba a ƙidaya idan an kunna shi, ana ƙidaya idan an kashe), za a ƙidaya sau ɗaya.
• Gefen Faɗuwa: Lokacin da aka tattara gefen faɗuwar (ƙidaya lokacin da aka kunna, kuma ba ƙidaya lokacin da aka sake shi ba), ƙidaya sau ɗaya.
• Mataki: Ana tattara gefuna biyu kuma ana ƙidaya sau ɗaya bi da bi.

Hanyar sharewa:

• Atomatik: Na'urar za ta share ta atomatik duk lokacin da aka karanta rajistar kimar DI (0x09DF ~ 0x09E6). Manual: A cikin yanayin jagora, wajibi ne a rubuta 1 zuwa madaidaicin rajistar sigina (0x0AA7 ~ 0x0AAE), kuma kowane riƙon rajista yana sarrafa sigina bayyananne.

Fitowar matakin
Fitowa bisa ga matakin da mai amfani ya saita, yanayin sauyawa na yanayin matakin yana kama da aikin maɓalli na kulle kai.

Fitowar bugun jini
Bayan an kunna fitarwar DO, fitarwar DO tana kashewa ta atomatik bayan kiyaye lokacin nisa da aka saita (a cikin ms). Kewayon saitin nisa bugun jini shine 50 ~ 65535ms (50ms ta tsohuwa).

Bi hanya
Dangane da tushen da mai amfani ya saita (lokacin da na'urar ke da AI ko aikin gano DI, ana iya amfani da DI ko AI azaman tushen mai biyo baya, in ba haka ba wannan aikin ba shi da amfani) don canza yanayin relay, kuma abubuwan da yawa zasu iya biyo baya. guda bi tushen fitarwa. Don sanya shi a sauƙaƙe, DI yana gano shigarwar, kuma ta atomatik yana fitar da relay wanda ke amfani da shi azaman tushen mai biyo baya (don ex.ample: DI shine 1, DO yana rufe). Lokacin da yanayin bin ya kunna, yakamata a saita tushen mai biyo baya a lokaci guda, in ba haka ba zai bi shigarwar farko ta tsohuwa.

Juya yanayin bi
Dangane da tushen da mai amfani ya saita (lokacin da na'urar ke da AI ko aikin gano DI, ana iya amfani da DI ko AI azaman tushen mai biyo baya, in ba haka ba wannan aikin ba shi da amfani) don canza yanayin relay, kuma abubuwan da yawa zasu iya biyo baya. guda bi tushen fitarwa. Don sanya shi a sauƙaƙe, DI yana gano shigarwar, kuma ta atomatik yana fitar da relay ɗin da ke biye da shi azaman tushen (don ex.ample: DI shine 1, DO ya katse). Lokacin da yanayin bin ya kunna, yakamata a saita tushen mai biyo baya a lokaci guda, in ba haka ba zai bi shigarwar farko ta tsohuwa.

Yanayin juyawa
Dangane da tushen da mai amfani ya saita (lokacin da na'urar ke da AI ko aikin gano DI, ana iya amfani da DI ko AI azaman tushen mai biyo baya, in ba haka ba wannan aikin ba shi da amfani) don canza yanayin relay, kuma abubuwan da yawa zasu iya biyo baya. guda bi tushen fitarwa. A taƙaice, lokacin da DI ta haifar da siginar faɗakarwa (tashi gefen ko faɗuwa gefen), DO zai sami canjin yanayi. Lokacin da aka kunna yanayin juyawa, sai a saita tushen mai zuwa a lokaci guda, in ba haka ba zai bi shigarwar farko ta tsohuwa.

Ƙarfin wutar lantarki
Bisa ga jihar da mai amfani ya saita. Bayan an kunna na'urar, za a kunna relay ɗin fitarwa bisa ga yanayin da mai amfani ya saita, kuma ana kashe ta ta tsohuwa.

Modbus Gateway
Na'urar zata iya watsa umarnin Modbus ba na asali ba daga cibiyar sadarwa/tashar tashar jiragen ruwa zuwa serial port/cibiyar sadarwa, kuma ana aiwatar da umarnin Modbus na gida kai tsaye.

 Modbus TCP/RTU canjin yarjejeniya
Bayan an kunna shi, za a canza bayanan Modbus TCP a gefen hanyar sadarwa zuwa bayanan Modbus RTU.

Modbus Adireshin Tace
Ana iya amfani da wannan aikin lokacin da aka yi amfani da wasu software na watsa shirye-shirye ko allon daidaitawa a matsayin mai watsa shiri don shiga tashar tashar jiragen ruwa na na'urar, kuma ana amfani da aikin ƙofar na'urar, bawa yana a ƙarshen hanyar sadarwa, kuma Modbus TCP zuwa RTU yana kunna aikin. Barori da yawa a cikin motar bas na iya haifar da ruɗani na bayanai. A wannan lokacin, ba da damar tace adireshin zai iya tabbatar da cewa adireshin da aka ƙayyade kawai zai iya wucewa ta na'urar; lokacin da siga ya kasance 0, za a watsa bayanan a bayyane; lokacin da siga ya kasance 1-255, saitin bayanan adireshi na injin bawa.

Modbus TCP Bayanin Tsarin Bayanai na Protocol

Tsarin TCP:

ID na kasuwanci	ID na yarjejeniya	Tsawon	Adireshin na'ura	Lambar aiki	Bangaren bayanai
2 Bit	2 Bit	N+2 Bit	1 Bit	1 Bit	N Bit

• ID na ciniki: Ana iya fahimtar shi azaman serial number na saƙon. Gabaɗaya, ana ƙara 1 bayan kowace sadarwa don bambance saƙonnin bayanan sadarwa daban-daban.
• Mai gano yarjejeniya: 00 00 yana nufin Modbus TCP protocol.
• Tsawon: Yana nuna tsayin bayanan gaba a cikin bytes.

Example: sami DI status

01 00	00 00	00 06	01	02	00 00 00 04
ID na kasuwanci	ID na yarjejeniya	Tsawon	Adireshin na'ura	Lambar aiki	Bangaren bayanai

Modbus RTU bayanin firam ɗin bayanan yarjejeniya

Tsarin tsarin RTU:

Adireshin na'ura	Lambar aiki	Bangaren bayanai	Duba lambar CRC
1 Bit	1 Bit	N Bit	2 Bit

Example: sami umarnin matsayi na DI 

01	02	00 00 00 04	79c9
Adireshin Modbus na na'ura	Lambar aiki	Bangaren bayanai	CRC rajista code

Loda mai aiki

• Na'urar tana goyan bayan aikin loda ƙimar shigarwar analog a tazara na yau da kullun. Saita ƙimar rijistar da ta dace na iya sarrafa lokacin tazara da ko za a lodawa.
• Na'urorin da ke da shigarwar dijital za su ɗora aiki sau ɗaya bayan an yi nasarar haɗa uwar garken, sannan za a loda shigar da dijital bayan canjin matsayi. Na'urori tare da shigarwar analog za su ba da rahoton matsayin shigarwar analog bisa ga saita lokacin lokacin ƙaddamarwa mai aiki (lokacin daidaitawa shine 1-65535).
• Lokacin da aka saita shi zuwa 0, ana kashe abin da ake aikawa; idan an saita shi zuwa wata ingantacciyar ƙimar lamba N, za a yi ɗorawa a cikin tazarar daƙiƙan N.

[Lura] Na'urar za ta iya aiki ne kawai idan an saita ta a yanayin abokin ciniki, kuma ƙimar rijistar ba sifili bane don kunna ɗorawa mai aiki.

 Bayanan Module na Musamman

Modbus Address
Adireshin na'urar shine 1 ta tsohuwa, kuma ana iya canza adireshin, kuma kewayon adireshin shine 1-247.

Sunan Module
Masu amfani za su iya saita sunan na'urar bisa ga bukatunsu don rarrabewa, tallafawa Ingilishi, tsarin dijital, har zuwa bytes 20.

Siffofin cibiyar sadarwa
Sai dai in an kayyade in ba haka ba: waɗannan sigogi masu alaƙa da hanyar sadarwa tsoho zuwa sigogi masu alaƙa da IPV4.

1. MAC na na'urar: mai amfani zai iya samun ta ta hanyar karanta ƙayyadaddun rajista, kuma ba za a iya rubuta wannan siga ba.
2. Adireshin IP: Adireshin IP na na'ura, mai karantawa da rubutawa.
3. Modbus TCP tashar jiragen ruwa: lambar tashar tashar jiragen ruwa na na'urar, abin karantawa da rubutu.
4. Mashin subnet: abin rufe fuska, abin karantawa da rubutu.
5. Adireshin kofa: gateway.
6. DHCP: Saita hanyar da na'urar ke samun IP: a tsaye (0), mai ƙarfi (1).
7. IP Target: Lokacin da na'urar ke aiki a yanayin abokin ciniki, adireshin IP ko sunan yanki na haɗin na'urar.
8. Manufa tashar jiragen ruwa: Lokacin da na'urar ke aiki a yanayin abokin ciniki, tashar tashar tashar haɗin na'urar.
9. Sabar DNS: Na'urar tana cikin yanayin abokin ciniki kuma tana warware sunan yankin uwar garken.
10. Yanayin aiki na Module: canza yanayin aiki na module. Server: Na'urar tana daidai da a
    uwar garken, jiran abokin ciniki don haɗawa. Matsakaicin adadin haɗin kai shine 4. Abokin ciniki: Na'urar tana haɗa kai tsaye zuwa IP da tashar jiragen ruwa da mai amfani ya saita.
11. Uploading mai aiki: Lokacin da wannan sigar ba ta 0 ba, kuma na'urar tana cikin yanayin abokin ciniki, za a loda madaidaicin shigar da na'urar zuwa uwar garken lokacin da aka haɗa ta da farko ko shigar ta canza, kuma za a loda shigar da analog daidai gwargwadon lokacin da aka saita.

Serial Port Parameters
Ma'auni don saita sadarwar serial:

Matsaloli na asali:

• Yawan Baud: 9600 (03);
• Bayanan bayanai: 8bit;
• Tsaida bit: 1bit;
• Duba lamba: BABU (00);

 Yawan Baud:

Teburin ƙimar ƙimar Baud
0 x0000	1200
0 x0001	2400
0 x0002	4800
0x0003 (default)	9600
0 x0004	19200
0 x0005	38400
0 x0006	57600
0 x0007	115200

 Duba Lambobi:

Duba Lambobi
0x0000 (tsoho)	BABU
0 x0001	ODD
0 x0002	KODA

Nunin OLED da tsarin siga
Nunin nuni ya haɗa da shafin nunin bayanai (shafin nunin matsayi DO) da shafin saitin siga ( sigogin ɓangarori).

Interface Nuni Bayani
Ciki har da shafin nunin halin DO, gajeriyar latsa maɓallan sama da ƙasa don canja wurin dubawa.

Nunin siginar kayan aiki
Danna maballin hagu ko dama don shigar da bayanan shigar da kalmar wucewa, cika madaidaicin shigar da kalmar wucewa, sannan a nuna mahallin bayanan bayanan na'urar (Password interface: tsoho kalmar sirri: 0000. Gajeren danna tsakiya don tabbatar da kalmar wucewa; Maɓallai na hagu da dama na iya canza kalmar sirri bit, Maɓallai sama da ƙasa suna iya canza darajar bit na yanzu. Kalmar wucewa tana da jimlar lambobi 4, kuma kowane shigarwa yana da lamba): daga 0- jere): daga 9):

Saitin saitin sigina daga sama zuwa ƙasa shine:

1. Modbus adireshin;
2. Yawan Baud;
3. Bayanan bayanai;
4.  Duba Lambobi;
5. Tsaya bit;
6. tashar jiragen ruwa na gida;
7. Adireshin IP na gida;
8. Yanayin hanyar sadarwa;
9. Gateway;
10. Subnet mask;
11. DNS;
12. adireshin MAC;
13. DHCP;
14. IP manufa;
15. tashar tashar jiragen ruwa;
16.  Modbus TCP/RTU canjin yarjejeniya;
17. Loda mai aiki;
18. Modbus address tace;;

 Fuskar Kanfigareshan Sigar Kayan aiki
Latsa ka riƙe maɓallin tabbatarwa don shigar da mahallin shigar da kalmar wucewa, cika madaidaicin shigar da kalmar wucewa, sannan shigar da mahallin daidaitawa (Password interface: tsoho kalmar sirri: 0000; gajeriyar danna tsakiya don tabbatar da kalmar wucewa, maɓallai na hagu da dama suna canza kalmar sirrin bit, kuma maɓallan sama da ƙasa suna canza darajar bit na yanzu, kalmar sirri tana da jimlar lambobi 4, kuma kowane kewayon shigarwa shine lamba daga 0-9). Zaɓi abin saitin, shigar da shafin daidaitawa kuma gajeriyar danna maɓallan sama da ƙasa don canza abun saitin;

Zaɓi abin saiti, ɗan gajeren latsa don tabbatarwa ko danna dama, abun saitin yana samun siginan kwamfuta don wakiltar zaɓin kuma shigar da abun saitin; Daidaita ƙimar siga: Bayan zaɓar abin saitin, maɓallan sama da ƙasa na iya canza ƙima ko ƙimar zaɓi; maɓallan hagu da dama suna motsa siginan kwamfuta a cikin abin siga; Tabbatar da ƙimar siga: Bayan daidaita ƙimar siga, danna maɓallin shigar don fita abun saitin yanzu. Ajiye saitunan sigina kuma sake farawa: Bayan saita sigogi, matsar da siginan kwamfuta don adanawa da sake farawa, sannan gajere

latsa maɓallin tabbatarwa don shigar da ajiyar tabbaci kuma sake kunna yanayin. Gajeren danna maɓallin tabbatarwa (latsa wasu maɓallan don fita yanayin tabbatarwa) don adana sigogi kuma sake kunna na'urar.
Fita ba tare da adana sigogi ba: matsar da siginan kwamfuta don fita, sannan gajeriyar danna maɓallin tabbatarwa don shigar da yanayin ficewar tabbatarwa, gajeriyar danna maɓallin tabbatarwa (latsa wasu maɓallan don fita daga yanayin tabbatarwa), sannan ku fita ma'aunin daidaitawa ba tare da adana sigogi ba. Daga cikin su, ba za a iya saita bit na bayanai da bit tasha ba. Bayan an kunna yanayin DHCP, adireshin IP na gida, ƙofa, da abin rufe fuska ba za a iya daidaita su ba kuma na'ura mai ba da hanya tsakanin hanyoyin sadarwa ne kawai ya sanya su;

Barcin allo
Allon na'urar yana da aikin barci, wanda aka kashe ta tsohuwa kuma ana iya saita shi a cikin mahallin daidaitawa. A cikin kowane maɓalli, lokacin da babu aikin maɓalli na daƙiƙa 180, allon zai shiga yanayin barci. A wannan lokacin, ƙirar tana nuna robot Ebyte. Danna kowane maɓalli na iya fita yanayin barci. Lokacin da allon yana cikin yanayin barci, za a inganta ingantaccen tsarin na'urar.

Tsarin siga na MODBUS
Lura: Dangane da buƙatun amfani, wasu software (kamar KingView) yana buƙatar ƙara +1 lokacin jujjuya daga hexadecimal zuwa decimal don aiki akan rajista (duk darajar decimal a cikin tebur an riga an daidaita su ta +1).

DO Jerin Rajista

Ayyukan yin rijista	Adireshin rajista (HEX)	Adireshin rajista (DEC)	Nau'in yin rajista	Lamba	Aiki	Ragewar Bayanai / Bayani	Lambar ayyuka masu alaƙa
DO hali	0 x0000	0-0001	Kwanci	6	RW	Rubuta don canza yanayin DO na yanzu, karanta don samun yanayin DO na yanzu	R：0x01 W：0x0F、0x05
Jari lokacin da aka kunna DO	0 x0064	4-0101	Rike rajista	6	RW	Yanayin tsoho na nada bayan kunnawa	R：0x01 W：0x0F、0x05
Yanayin Aiki	0 x0578	4-1401	Rike rajista	6	RW	0x0000 matakin babu yanayin bi 0x0001 Pulse babu yanayin bi 0x0002 Yanayin bi 0x0003 Juya Yanayin Bi 0x0004 Yanayin Juya Tara	R：0x03 W：0x06、0x10
YI pulsedidth	0x05DC	4-1501	Rike rajista	6	RW	Saukewa: 50-65535	R：0x03W：0x06、0x10
KU BI Source	DI: 0x0000 AI: 0x8000	DI: 4-0001 AI: 4-32769	Rike rajista	6	RW	Girman: 0x0000: Bi DI1 0x0001: Bi DI2 0x8000: Bi AI10x8001: Bi AI2	R：0x03 W：0x06、0x10

 Rijista masu alaƙa da Module

Ayyukan yin rijista	Adireshin rajista (HEX)	Adireshin rajista (DEC)	Nau'in yin rajista	Lamba	Aiki	Ragewar Bayanai / Bayani	Lambar ayyuka masu alaƙa
Adireshin Module	0x07E8 ku	4-2025	Rike rajista	1	RW	Adireshin Modbus, 1-247 adireshi masu daidaitawa	R: 0x03W: 0x06
Module model	0 x07d0	4-2001	Rike rajista	12	R	Sami samfurin na yanzu	R: 0x03
Sigar firmware	0x07DC	4-2013	Rike rajista	1	R	Samu lambar sigar firmware	R: 0x03
Sunan tsarin	0x07 ku	4-2015	Rike rajista	10	RW	Sunan tsarin al'ada	R: 0x03W: 0x10
Moduleretan farawa	0x07EA	4-2027	Rike rajista	1	W	Rubuta 0x5BB5 don sake kunnawa.	W:0x06
Mayar da sigogin masana'anta	0x07E9 ku	4-2026	Rike rajista	1	W	Rubuta 0x5BB5 don mayar da saitunan masana'anta.	W:0x06
Serial baud rate	0 x0834	4-2101	Rike rajista	1	RW	Duba teburin lambar baud, Default shine 9600 (0x0003)	R：0x03W：0x06、0x10
Serial rajistan lamba lambobi	0 x0836	4-2103	Rike rajista	1	RW	0x0000 babu checksum (tsoho) 0x0001 m parity0x0002 ko da daidaici	R：0x03 W：0x06、0x10

Rajista masu alaƙa da hanyar sadarwa

Ayyukan yin rijista	Adireshin rajista (HEX)	Adireshin rajista (DEC)	Nau'in yin rajista	Lamba	Aiki	Ragewar Bayanai / Bayani	Lambar ayyuka masu alaƙa
Module mac address	0 x0898	4-2201	Rike rajista	3	R	Alamar MAC na na'ura	R: 0x03
Adireshin IP na gida	0x089B	4-2204	Rike rajista	2	RW	Tsoho: 192.168.3.7	R：0x03W：0x06、0x10
tashar jiragen ruwa na gida	0 x089d	4-2206	Rike rajista	1	RW	1 ～ 65535, tsoho: 502	R：0x03W：0x06、0x10
Subnet mask address	0x089E	4-2207	Rike rajista	2	RW	Tsoho: 255.255.255.0	R：0x03 W：0x06、0x10
Adireshin ƙofa	Saukewa: 0X08A0	4-2209	Rike rajista	2	RW	Tsoho: 192.168.3.1	R：0x03W：0x06、0x10

Saitin yanayin DHCP	Saukewa: 0X08A2	4-2211	Rike rajista	1	RW	0x0000 a tsaye IP (tsoho) 0x0001 Sami IP ta atomatik	R：0x03 W：0x06、0x10
TargetIP/ sunan yanki	Saukewa: 0X08A3	4-2212	Rike rajista	64	RW	Tsarin igiya da aka adana a cikin IP/sunan yanki tsoho IP: 192.168.3.3	R：0x03 W：0x06、0x10
tashar jiragen ruwa	0x08E3 ku	4-2276	Rike rajista	1	RW	0-65535, tsoho 502	R：0x03W：0x06、0x10
Adireshin IP na uwar garken DNS	0x08E4 ku	4-2277	Rike rajista	2	RW	Tsoho 8.8.8.8	R：0x03 W：0x06、0x10
Modulework yanayin	0x08E6 ku	4-2279	Rike rajista	1	RW	0x0000 yanayin uwar garken0x0001 yanayin abokin ciniki	R：0x03W：0x06、0x10
Loda mai aiki	0x08E7 ku	4-2280	Rike rajista	1	RW	0x0000 nakasassu, wasu:1～65535s aikewa da zagayowar	R：0x03W：0x06、0x10
MOSBUS TCP/RTU mai iya canzawa	0x08E8 ku	4-2281	Rike rajista	1	RW	0, rufe, 1 buɗaɗɗen musayar yarjejeniya	R：0x03 W：0x06、0x10
MODBUSaddress tacewa	0x08E9 ku	4-2282	Rike rajista	1	RW	0: watsawa ta gaskiya, 1-255: lokacin da bayanan ba na gida ba ne, duba adireshin bawa na umarnin, kuma ana iya wucewa lokacin da aka saita darajar.	R：0x03 W：0x06、0x10

 Exampumarnin umarnin aiki na Modbus

Karanta halin coil (DO).
Yi amfani da lambar aikin karantawa na coil (01) don karanta yanayin coil ɗin fitarwa, misaliampda:

01	01	00 00	00 04	3D C9
Modbus address	Lambar aiki	Yi rajistar adireshin farko	Adadin abubuwan fitar da aka karanta	CRC rajista code

Bayan aika umarnin da ke sama zuwa na'urar ta bas 485, na'urar za ta dawo da dabi'u masu zuwa:

01	01	01	01	90 48
Modbus address	Lambar aiki	Bytes na bayanai	Bayanan halin da aka dawo	CRC rajista code

Bayanan matsayi 01 da aka dawo a sama yana nuna cewa an kunna fitarwa DO1.

Mai sarrafa coil (DO).
Taimakawa aiki na coil guda ɗaya (05), aiki na ƙididdiga masu yawa (0F).
Yi amfani da umarnin 05 don rubuta umarni ɗaya, misaliampda:

01	05	00 00	Farashin 00FF	8C3 ku
Modbus address	Lambar aiki	Yi rajistar adireshin farko	Ci gaba: FF 00 Kusa: 00 00	CRC rajista code

Bayan aika umarnin da ke sama zuwa na'urar ta bas 485, na'urar za ta dawo da dabi'u masu zuwa:

01	05	00 00	Farashin 00FF	8C3 ku
Modbus address	Lambar aiki	Yi rijistar adireshin farko	Hanyar aiki	CRC rajista code

An kunna nada DO1.
Yi amfani da lambar aikin 0F azaman umarni don rubuta coils da yawa, misaliampda:

01	0F	00 00	00 04	01	0F	7e 92
Modbus address	Lambar aiki	Adireshin farko	Yawan coils	Bytes na bayanai	Sarrafa bayanan coil	CRC rajista code

Bayan aika umarnin da ke sama zuwa na'urar ta bas 485, na'urar za ta dawo da dabi'u masu zuwa:

01	0F	00 00	O4	54 08
Modbus address	Lambar aiki	Adireshin rajista	Yawan coils	CRC rajista code

Nada duk a kunne.

 Karanta rijistar rikodi
Yi amfani da lambar aiki 03 don karanta ƙimar rajista ɗaya ko fiye, misaliampda:

01	03	05 78	00 01	04 DF
Modbus address	Lambar aiki	Yi rijistar adireshin farko	Adadin rijistar da aka karanta	CRC rajista code

Bayan aika umarnin da ke sama zuwa na'urar ta bas 485, na'urar za ta dawo da dabi'u masu zuwa:

01	03	02	00 00	B8
Modbus address	Lambar aiki	Bytes na bayanai	Bayanan da aka dawo	CRC rajista code

Na sama 00 00 yana nufin cewa DO1 yana cikin yanayin fitarwa.

 Yin rijistar aiki
Ayyukan tallafi na rajista ɗaya (06), aiki na yawan rajista (10) aikin lambar aiki. Yi amfani da lambar aiki 06 don rubuta rijistar riƙo ɗaya, misaliample: saita yanayin aiki na DO1 zuwa yanayin bugun jini:

01	06	05 78	00 01	C8 DF
Modbus address	Lambar aiki	Adireshin rajista	Rubuta darajar	CRC rajista code

Bayan aika umarnin da ke sama zuwa na'urar ta bas 485, na'urar za ta dawo da dabi'u masu zuwa:

01	06	05 78	00 01	C8 DF
Modbus address	Lambar aiki	Adireshin rajista	Rubuta darajar	CRC rajista code

Idan gyara ya yi nasara, bayanan da ke cikin rajistar 0x0578 shine 0x0001, kuma ana kunna yanayin fitarwar bugun jini.
Yi amfani da lambar aiki 10 don rubuta umarnin rijistar riko da yawa, misaliample: saita yanayin aiki na DO1 da DO2 a lokaci guda.

01	10	05 78	00 02	04	00 01 00 01	Bayani na 5A7D
Modbus adireshin	Aiki code	Shugaban rajista adireshin	Adadin yin rajista	Yawan bytes na rubuta bayanai	Bayanan da aka rubuta	Farashin CRC code

Bayan aika umarnin da ke sama zuwa na'urar ta bas 485, na'urar za ta dawo da dabi'u masu zuwa:

01	10	05 78	00 02	C1D
Modbus address	Aiki code	Adireshin rajista	Yawan rajista	CRC rajista code

Idan gyare-gyaren ya yi nasara, ƙimar rajistar rajista guda biyu da suka fara da 0x0578 sune 0x0001 da 0x0001 bi da bi, yin alama DO1 da DO2 don kunna fitarwar bugun jini.

Software na Kanfigareshan

Saye da Sarrafa

1. Mataki 1: Haɗa na'urar zuwa software na daidaitawa.
   1. Kuna iya saita na'urar ta zaɓin dubawa (serial port/port port); idan ka zaɓi tashar tashar sadarwa, dole ne ka fara zaɓar katin sadarwar sannan ka nemo na'urar.
   2. Idan kun zaɓi tashar tashar jiragen ruwa, kuna buƙatar zaɓar lambar tashar tashar jiragen ruwa daidai, da ƙimar baud iri ɗaya, bit data, bit stop, perity bit da adireshin yanki kamar na'urar, sannan bincika.
2. Mataki 2: Zaɓi na'urar da ta dace.
3. Mataki 3: Danna na'urar online don shigar da IO monitoring. Mai zuwa shine nunin allo na saka idanu na IO.

Matsakaicin daidaitawar dubawa

1. Mataki 1: Haɗa na'urar koma zuwa "Samun da Sarrafa".
2. Mataki 2: Kuna iya saita sigogi na na'ura, sigogin cibiyar sadarwa, sigogin DI, sigogin AI, sigogin DO, da sigogin AO (don ex.ample: idan na'urar ba ta da aikin AO, ba za a iya daidaita sigogin AO ba)
   Haƙƙin mallaka ©2012–2024, Chengdu Ebyte Electronic Technology Co., Ltd.
3. Mataki 3: Bayan saita sigogi, danna Zazzage sigogi. Bayan saƙon gaggawa a cikin kayan aikin log ɗin ya nuna cewa an adana sigogi cikin nasara, danna Sake kunna na'urar. Bayan na'urar ta sake farawa, sigogin da aka gyara zasu fara aiki.

Bita tarihi

Sigar	Kwanan sabuntawa	Bayanan Bayani na Bita	Mutumin mai kula
1.0	2023-6-6	Sigar farko	LT
1.1	2024-10-18	Bita na abun ciki	LT

Game da mu
Goyon bayan sana'a: support@cdebyte.com
Takardu da RF Saitin hanyar saukewa: https://www.ru-ebyte.com

• Lambar waya: + 86-28-61399028
• Saukewa: 028-64146160
• Web：https://www.ru-ebyte.com
• Adireshin: Cibiyar Innovation D347, 4# XI-XIN Road, Chengdu, Sichuan, China

FAQ

• Q: Za a iya amfani da tsarin ME31-XXAX0060 a cikin yanayin waje?
  A: An tsara tsarin don amfanin cikin gida kawai kuma bai kamata a fallasa shi zuwa yanayin waje ba.
• Q: Yawan fitowar gudu ba da sanda nawa ake samu akan tsarin ME31-XXAX0060?
  A: Module ɗin yana ba da abubuwan fitarwa na X don dalilai na sarrafawa.

Takardu / Albarkatu

EBYTE ME31 Network IO Networking Module [pdf] Manual mai amfani ME31-XXAX0060, ME31 Network IO Networking Module, ME31, Cibiyar Sadarwar IO Networking Module

Magana

• Manual mai amfani