V2403C Series
Quick Installation Guide
Embedded Computers
Shanduro 1.2, Chivabvu 2022
Overview
Iyo V2403C Series yakamisikidzwa makomputa akavakwa akatenderedza Intel® Core™ i7/i5/i3 kana Intel® Celeron® yakakwirira-performance processor uye anouya anosvika 32 GB RAM, imwe mSATA slot, uye maviri HDD/SSD yekuwedzera kuchengetedza. Makomputa anoenderana neEN 50121-4, E1 mucherechedzo, uye ISO-7637-2 zviyero zvichiita kuti ive yakakodzera kune njanji.
uye maapplication emumotokari.
V2403C makomputa akashongedzerwa neyakapfuma seti yenzvimbo dzinosanganisira 4 gigabit Ethernet ports, 4 RS-232/422/485 serial ports, 4 DIs, 4 DOs, uye 4 USB 3.0 ports. Pamusoro pezvo, ivo vanopihwawo 1 DisplayPort kubuda uye 1 HDMI inobuda ine 4K resolution. Kubatana kwakavimbika uye manejimendi akanaka emagetsi ndiwo akakosha kune-mumotokari maapplication. Iwo makomputa anopihwa 2 mPCIe isina waya yekuwedzera slots uye 4 SIM-kadhi slots kuti igadzirise isina basa LTE/Wi-Fi yekubatanidza. Panyaya yekutonga kwesimba, kutanga uye kumisa kunonoka nzira dzinobatsira mukudzivirira kusashanda zvakanaka kwehurongwa uye kukuvara.
Package Checklist
Yese yakakosha system modhi package inotumirwa nezvinhu zvinotevera:
- V2403C Series yakamisikidzwa komputa
- Kisimusi-yekumisikidza kit
- Chengetedza disk tray package
- HDMI tambo yekuvhara
- Kurumidza kuisa gwaro (rakadhindwa)
- Warranty card
Hardware Installation
Mberi View
Rear View
Dimensions
LED Indicators
Tafura inotevera inotsanangura zviratidzo zve LED zviri kumberi nekumashure kwekombuta yeV2403C.
| LED Zita | Status | Function |
| Simba (Pabhatani remagetsi) |
Girinhi | Simba rakabatidzwa |
| Off | Hapana kupinza kwemagetsi kana chero kukanganisa kwesimba | |
| Ethernet (100 Mbps) (1000 Mbps) |
Girinhi | Steady On: 100 Mbps Ethernet link Kubwaira: Kufambiswa kwedata kuri kuitika |
| Yero | Steady On: 1000 Mbps Ethernet link Kubwaira: Kufambiswa kwedata kuri kuitika | |
| Off | Data yekufambisa kumhanya pa10 Mbps kana tambo haina kubatana |
| LED Zita | Status | Function |
| Seri (TX/RX) | Girinhi | Tx: Kufambiswa kwedata kuri kuitika |
| Yero | Rx: Kugamuchira Data | |
| Off | Hapana oparesheni | |
| Storage | Yero | Dhata iri kuwanikwa kubva kune mSATA kana maSATA madhiraivha |
| Off | Data haisi kuwanikwa kubva kumadhiraivha ekuchengetedza |
Kuisa iyo V2403C
Komputa yeV2403C inouya nemabhuraketi maviri emadziro. Batanidza mabhuraketi pakombuta uchishandisa screws ina padivi rega rega. Ita shuwa kuti mabhuraketi anokwirisa akabatanidzwa kune V2403C komputa munzira inoratidzwa mumufananidzo unotevera.
Iwo masere screws emabhuraketi anokwirisa anosanganisirwa mune chigadzirwa package. Iwo akajairwa IMS_M3x5L screws uye anoda torque ye4.5 kgf-cm. Tarisa kumufananidzo unotevera kuti uwane mamwe mashoko.
Shandisa screws mbiri (M3 * 5L standard inokurudzirwa) padivi rega rega kubatanidza iyo V2403C kumadziro kana kabati. Chigadzirwa chacho hachibatanidzi masikironi mana anodiwa pakubatanidza kit-yekumisikidza madziro kumadziro; dzinoda kutengwa zvakasiyana. Ita shuwa kuti V2403C komputa yakaiswa munzira inoratidzwa mumufananidzo unotevera.
Kubatanidza Simba
Makomputa eV2403C anopihwa 3-pini magetsi ekubatanidza emagetsi mune terminal block pane yepamberi. Batanidza tambo dzemagetsi tambo kune majoini uye wobva wasimbisa majoini. Batanidza bhatani remagetsi. Iyo Power LED (pabhatani remagetsi) ichavhenekera kuratidza kuti simba riri kupihwa pakombuta. Zvinofanira kutora masekonzi makumi matatu kusvika makumi matanhatu kuti sisitimu yekushandisa ipedze iyo boot-up process.
| Pin | Tsanangudzo |
| 1 | V+ |
| 2 | V- |
| 3 | Ignition |
Kuiswa kwemagetsi kunopihwa pazasi:
- Iyo DC simba sosi reti ndeye 12 V @ 5.83 A, 48 V @ 1.46 A, uye shoma 18 AWG.
Nekudzivirira kwekuvhiya, batanidza chinongedzo chepasi chiri pazasi pesimba rekubatanidza nepasi (pasi) kana simbi. Uye zvakare, pane yekudzima inodzora switch pane yekumberi panhi, iyo inogona kushandiswa kudzora kupinza kwemagetsi. Tarisa kune V2403C Hardware User's Manual kuti uwane ruzivo.
Kubatanidza Zviratidziro
Iyo V2403C ine imwe inoratidzira port yekubatanidza pane yekumashure panhi. Uye zvakare, imwe HDMI interface inopihwawo pane yekumashure mapaneru.
CHERECHEDZA Kuti uve neakavimbika vhidhiyo kutenderera, shandisa premium HDMI-yakasimbiswa tambo.
USB Ports
Iyo V2403C inouya ne 4 USB 3.0 ports pane yekumberi panhi. Iwo ma USB ports anogona kushandiswa kubatanidza kune mamwe maperipherals, akadai sekhibhodi, mbeva, kana flash drive yekuwedzera sisitimu yekuchengetedza simba.
Serial Ports
Iyo V2403C inouya neina software-selectable RS-232/422/485 serial ports pane yekumashure mapaneru. Zviteshi zvinoshandisa DB9 zvibatanidza zvechirume.
Tarisa kune inotevera tafura yepini maaction:
| Pin | RS-232 | RS-422 | RS-485 (4-waya) | RS-485 (2-waya) |
| 1 | D.C.D. | TxDA(-) | TxDA(-) | – |
| 2 | RxD | TxDB(+) | TxDB(+) | – |
| 3 | TxD | RxDB(+) | RxDB(+) | DataB(+) |
| 4 | DTR | RxDA(-) | RxDA(-) | DataA(-) |
| 5 | GND | GND | GND | GND |
| 6 | DSR | – | – | – |
| 7 | RTS | – | – | – |
| 8 | CTS | – | – | – |
Ethernet Ports
Iyo V2403C ine 4 100/1000 Mbps RJ45 Ethernet ports ine RJ45 yekubatanidza pane yepamberi. Tarisa kune inotevera tafura yepini maaction:
| Pin | 10/100 Mbps | 1000 Mbps |
| 1 | ETx+ | TRD(0)+ |
| 2 | ETx- | TRD(0)- |
| 3 | ERx+ | TRD(1)+ |
| 4 | – | TRD(2)+ |
| 5 | – | TRD(2)- |
| 6 | ERx- | TRD(1)- |
| 7 | – | TRD(3)+ |
| 8 | – | TRD(3)- |
CHERECHEDZA Kune yakavimbika Ethernet yekubatanidza, isu tinokurudzira kugonesa madoko mune yakajairwa tembiricha uye kuachengeta achigonesa munzvimbo yepamusoro/yakaderera-tembiricha.
Digital Inputs/Digital Outputs
Iyo V2403C inouya neaina madhijitari ekuisa uye mana edhijitari anobuda mune terminal block. Tarisa kunhamba dzinotevera dzepini tsananguro uye zviyero zvazvino.
| Digital Inputs | Digital Outputs |
| Dry Contact Logic 0: Pfupi ku Ground Logic 1: Vhura Wet Contact (DI kusvika COM) Logic 1: 10 kusvika 30 VDC Logic 0: 0 kusvika 3 VDC |
Chiyero Chazvino: 200 mA pa channel Voltage: 24 kusvika 30 VDC |
Kuti uwane dzakadzama nzira dzekuisa waya, tarisa kune V2403C Hardware Mushandisi's Manual.
Kuisa Storage Disks
Iyo V2403C inouya nezvigadziko zviviri zve 2.5-inch, zvichibvumira vashandisi kuisa madhisiki maviri ekuchengetedza data. Tevera matanho aya kuti uise hard disk drive.
- Bvisa dhisiki rekuchengetedza dhisiki kubva pachigadzirwa package.
- Isa dhisiki drive patireyi.
- Shandura dhisiki uye tireyi kuronga kutenderedza kune view nechekumashure kwetireyi. Sunga zviputi zvina kuti uchengetedze dhisiki kune tray.
- Bvisa screws dzese pane yekumashure yekombuta yeV2403C.
- Bvisa chivharo chekumashure chekombuta uye uwane nzvimbo yekuchengetera disk sockets. Kune zvigadziko zviviri zvekuchengetedza disk tray; unogona kuisa pane chero socket.
- Kuti uise dhisiki rekuchengetedza dhisiki, isa magumo etirayi pedyo negororo pane socket.
- Isa tireyi pachigadziko uye sundira kumusoro kuitira kuti zvibatanidza pane yekuchengetedza disk tray uye socket zvinogona kubatanidzwa. Sunga ma screws maviri pazasi petireyi.
Kuti uwane mirairo yekuisa mamwe maperipheral midziyo kana mawire module, tarisa kuV2403C Hardware User's Manual.
CHERECHEDZA Komputa iyi inoitirwa kuiswa munzvimbo isingatenderwi chete. Pamusoro pezvo, nekuda kwezvikonzero zvekuchengetedza, komputa inofanirwa kuiswa uye kubatwa chete neanokwanisa uye ane ruzivo nyanzvi.
CHERECHEDZA Komputa iyi yakagadzirirwa kupihwa nemidziyo yakanyorwa yakaiswa 12 kusvika 48 VDC, shoma 5.83 kusvika 1.46 A, uye shoma.
Tma=70˚C. Kana iwe uchida rubatsiro nekutenga adapta yemagetsi, taura neMoxa technical support timu.
CHERECHEDZA Iyi komputa inogona kuiswa pamotokari seye control unit inounganidza data kubva kune akasiyana maI / O zvishandiso uye kutumira iyo data kune mota inotumira nzvimbo.
CHERECHEDZA Kana ukashandisa adapta yeKirasi I, tambo yemagetsi adapta inofanirwa kubatanidzwa kune soketi ine chinongedzo chepasi kana tambo yemagetsi uye adapta zvinofanirwa kuenderana neKirasi II kuvaka.
Kutsiva Bhatiri
Iyo V2403C inouya neimwe slot yebhatiri, iyo yakaiswa ne lithium bhatiri ine 3 V/195 mAh yakatarwa. Kutsiva bhatiri, tevera matanho ari pasi apa:
- Chivharo chebhatiri chiri pane reshure rekombuta.
- Sunungura masiruuru maviri pavhavha yebhatiri.
- Bvisa chivharo; bhatiri rinosungirirwa pachivharo.
- Kupatsanura chinobatanidza uye bvisa masiruuru maviri pandiro yesimbi.
- Tsiva bhatiri idzva muchibatiso chebhatiri, isa ndiro yesimbi pabhatiri uye sunga masiruuru maviri zvakasimba.
- Batanidzazve chinobatanidza, isa chibatiso chebhatiri mukati me slot, uye chengetedza chivharo cheslot nekusunga ma screws maviri pabutiro.
CHERECHEDZA
- Iva nechokwadi chekushandisa rudzi rwakafanira rwebhatiri. Bhatiri risiri iro rinogona kukonzera kukuvara kwehurongwa. Bata Moxa's technical support staff kuti ubatsirwe, kana zvichidikanwa.
- Kuti uderedze njodzi yemoto kana kutsva, usabvisa, kupwanya, kana kuboora bhatiri; usarase mumoto kana mumvura, uye usapfupisa mabiko ekunze.
ATTENTION
Usati wabatanidza V2403C kune DC magetsi ekuisa, ita shuwa kuti DC magetsi sosi voltage yakagadzikana.
- Wiring yeiyiputer terminal block ichaiswa nemunhu ane hunyanzvi.
- Rudzi rwewaya: Cu
- Shandisa chete 28-18 AWG saizi yewaya uye kukosha kwetorque ye0.5 Nm.
- Shandisa conductor mumwechete muclamping point pakati peDC magetsi sosi uye yekuisa simba.
Rutsigiro rwehunyanzvi Ruzivo rwekutaurirana
www.moxa.com/support
Zvinyorwa / Zvishandiso
 |
MOXA V2403C Series Embedded Computers [pdf] Installation Guide V2403C Series Embedded Computers, V2403C Series, Embedded Computers |
