DMX2PWM Dimmer 4CH
Faatonuga

Fa'ailoga

• 4 auala fa'aulufalega PWM
• Fuafua fua fa'atatau o galuega faatino a le PWM (8 po'o le 16 bit) mo le fa'alumaina (e ala i le RDM po'o fa'amau & fa'aaliga)
• E mafai ona fetuutuunai le PWM alaea (0.5 … 35kHz) mo le emoemo atoa fua fa'apouliuli (e ala i le RDM po'o fa'amau & fa'aaliga)
• Fuafuaga seti fa'aitiitiga fa'aitiitiga gamma tau (0.1 … 9.9) mo le fa'afetauiga o lanu moni (e ala i le RDM po'o fa'amau & fa'aaliga)
• Tele fa'aoga/tuuina voltage va'aiga: 12 … 36 V DC
• 13 uiga e iloa ai le tele o auala DMX e pulea le galuega a le PWM
• Tu'ufa'atasi tulaga tu'ufa'atasi ma le fa'atinoina o le Pule mo galuega laiti
• Galuega RDM
• Mauoa vaaiga na muai faatulagaina
• Fa'aaliga fa'apipi'i fa'atasi ma fa'amau mo le fa'aogaina faigofie ma fa'aoga fa'aoga ma su'ega i luga ole laiga
• Puipuiga tu'ufa'atasi mai le si'itia i luga ole fa'aoga DMX

Fa'ailoga Fa'ailoga Fa'amatalaga

• e: fa'ailoga DMX2PWM Dimmer 4CH
• Fa'afeiloa'iga
• Faatonuga (Igilisi)

AM467260055

Mo nisi fa'amatalaga o oloa ma la'uina mai taga'i www.ecue.com.

Fa'amatalaga o oloa

Fua (W x H x D)	170 x 53.4 x 28 mm / 6.69 x 2.09 x 1.1 inisi
mamafa	170 g
Malosiaga tuu	12 … 36 V DC (4-pin fa'amau)
Max. fa'aulu i le taimi nei i le “power fa'aoga"	20.5 A
O le vevela o galuega	-20 … 50 °C / -4 … 122 °F
Teuga vevela	-40 … 85 °C / -40 … 185 °F
Fa'agaoioiga/teuga susu	5 … 95% RH, e le fa'afefe
Fa'amauina	fa'atasi ai ma pu ki i so'o se fale mautu luga tūtū
Vasega puipuiga	IP20
Fale	PC
Tusi fa'amaonia	CE, UKCA, RoHS, FCC, TÜV Süd, UL Lisi o lo'o fa'atali

Fa'afeso'ota'i

Ulufale	1 x DMX512 / RDM (3-pin fa'amau), tu'ufua, puipuiga o le si'isi'i
Galuega Fa'atino	1 x DMX512 / RDM (3-pin fa'amau) mo le filifiliina o masini e tele (max. 256), tuufua, puipuiga o le si'isi'i 4 x PWM alavai (5-pin terminal) mo voltage + so'oga: tutusa ma le fa'aoga voltage – so'otaga: pito pito maualalo PWM ki
Max. galuega faatino i le taimi nei	5 A i le alavai
Malosiaga e maua mai ai	60 … 180 W ile alavai
PWM taimi	0.5 … 35 kHz
PWM galuega faatino iugafono	8 bit pe 16 bit
Pi'o fa'aitiitiga o mea e maua gamma	0.1 … 9.9 ga
Filifili i taimi uma le voltage e tusa ai ma lau fa'aautu fa'aa'ei le LED voltage!
	12 V PSU mo le 12 V LED 24 V PSU mo le 24 V LED 36 V PSU mo le 36 V LED

Terminals

Ituaiga so'oga	So'oga fa'amau puna
Ole tele ole uaea ile totonugalemu, pa'ia uaea ma pito ferrule	0.5 … 2.5 mm² (AWG20 … AWG13)
Taele umi	6 …7 mm / 0.24 … 0.28 i
Fa'amauina/fa'amatu'u ole uaea	Tu'i masini

Fua

Saogalemu & Lapataiga

• Aua ne'i fa'apipi'i i le mana e fa'aoga i le masini.
• Aua le fa'aalia le masini ile susu.
• Faitau fa'atonuga a'o le'i fa'apipi'i.

Fa'apipi'i

Ata uaea

Fa'apipi'i se 120 Ω, 0.5 W tete'e i le va o Out + ma Out - ports i le masini mulimuli o le DMX run.

1. Faiga fa'atasi ma se fa'atonu DMX fafo
   1.1) Aofa'i uta o ta'iala ta'itasi e le sili atu i le 10 A1.2) Aofa'i uta o ta'iala ta'itasi e sili atu i le 10 A
2. Faiga tuto'atasi
   2.1) Aofa'i uta o ta'iala ta'itasi e le sili atu i le 10 A2.2) Aofa'i uta o ta'iala ta'itasi e sili atu i le 10 A

Seti Mea

Ina ia fetuutuunai tulaga, oomi ia faamau i le faasologa lea e tusa ai:

1. Luga / Lalo - filifili se lisi lisi
2. Ulufale - ulufale i le lisi o mea e fai, e moli le faʻaaliga
3. Luga / Lalo - seti le tau
4. Tua - faʻamaonia le tau ma alu ese mai le lisi lisi.

Fa'atonuga faiga:

Seti le masini i le Dependent poʻo le Controller mode muamua, ae e te leʻi faʻapipiʻiina isi faʻatulagaga:

= Faiga fa'alagolago
I se faiga e iai le DMX i fafo, seti uma DMX2PWM Dimmer 4CH masini e fa'agasolo 1 mode.
I se faiga tuto'atasi (leai se fa'atonu DMX fafo), fa'atulaga uma fa'alagolago
DMX2PWM Dimmer 4CH masini e fa'agasolo 1 mode.
= Faiga Pule (tutoatasi)
I se faiga tuto'atasi, seti le DMX2PWM Dimmer 4CH masini e pulea i le run2 mode.
A maeʻa ona faʻatulagaina le faiga, e manaʻomia le toe amataina o le masini.

a) tamoe1:

Faailoga faailo DMX : A iloa se faʻailoga DMX, o le faʻaaliga i luga o le faʻaaliga e mulimuli mai
o le e mumu:.XXX. Afai e leai se fa'ailoga DMX, e le kilia le fa'ailoga ma emo le tagata.

1. Seti tuatusi DMX:
   Menu XXX. Fa'atonuga o le 001 (A001).
2. Fa'atulagaina o uiga o le DMX:
   Menu Fa'atonuga o le 4d.01.
   Seti le aofa'i o alalaupapa DMX fa'aaoga e pulea ai le aofa'i o laina o le PWM:

   DMX uiga DMX alavai	1A.01	2A.02	2b.01	3b.03	3c.01	4b.02
   1	ua faanenefu uma galuega faatino	ua faanenefu uma galuega faatino	galuega faatino 1 & 3 faanenefu	galuega faatino 1 & 3 faanenefu	galuega faatino 1 faanenefu	galuega faatino 1 & 3 faanenefu
   2		o mea uma e fa'apupulaina lelei	galuega faatino 2 & 4 faanenefu	galuega faatino 2 & 4 faanenefu	galuega faatino 2 faanenefu	mea fa'atino 1 & 3 fa'aitiitiga lelei
   3				galuega uma e mata'ina le fa'aitiitiga	galuega faatino 3 & 4 faanenefu	galuega faatino 2 & 4 faanenefu
   4						mea fa'atino 2 & 4 fa'aitiitiga lelei
   5
   6
   7
   8

   DMX uiga DMX alavai	4c.03	4d.01	5c.04	5d.03	6c.02	6d.04	8d.02
   1	galuega faatino 1 faanenefu	galuega faatino 1 faanenefu	galuega faatino 1 faanenefu	galuega faatino 1 faanenefu	galuega faatino 2 faanenefu	galuega faatino 1 faanenefu	galuega faatino 1 faanenefu
   2	galuega faatino 2 faanenefu	galuega faatino 2 faanenefu	galuega faatino 2 faanenefu	galuega faatino 2 faanenefu	galuega faatino 1 faanenefu lelei	galuega faatino 2 faanenefu	galuega faatino 1 faanenefu lelei
   3	galuega faatino 3 & 4 faanenefu	galuega faatino 3 faanenefu	galuega faatino 3 & 4 faanenefu	galuega faatino 3 faanenefu	galuega faatino 2 faanenefu	galuega faatino 3 faanenefu	galuega faatino 2 faanenefu
   4	galuega uma e mata'ina le fa'aitiitiga	galuega faatino 4 faanenefu	galuega uma e mata'ina le fa'aitiitiga	galuega faatino 4 faanenefu	galuega faatino 2 faanenefu lelei	galuega faatino 4 faanenefu 4	galuega faatino 2 faanenefu lelei
   5			aafiaga strobe	galuega uma e mata'ina le fa'aitiitiga	galuega faatino 3 & 4 faanenefu	galuega uma e mata'ina le fa'aitiitiga	galuega faatino 3 faanenefu
   6					mea fa'atino 3 & 4 fa'aitiitiga lelei	aafiaga strobe	galuega faatino 3 faanenefu lelei
   7							galuega faatino 4 faanenefu
   8							galuega faatino 4 faanenefu lelei

   Fa'amatalaga fa'amatalaga mo aafiaga strobe:

   Fa'amatalaga fa'amatalaga mo aafiaga strobe:

   {0, 7},//undefined

   {8, 65},//temu lemu–>saosaoa strobe

   {66, 71},//undefined

   {72, 127},//tu'i lemu vave latalata

   {128, 133},//undefined

   {134, 189},//slow close vave tulei

   {190, 195},//undefined

   {196, 250},//strobe fa'afuase'i

   {251, 255},//undefined

3. Fa'atonuga tau gamma pupuni fa'aitiitiga fa'asolo:
   Menu XX . Fa'atonuga o le ga 1.5 (gA1.5).
   Filifili i le va o le 0.1 … 9.9.
4. Fa'asologa o taimi ole PWM fa'aulufale:
   Menu XX. Fa'atonuga o le 4 kHz (PF04).
   Filifili le taimi ole PWM: 00 = 0.5 kHz, 01 = 1 kHz, 02 = 2 kHz … 25 = 25 kHz, 35 = 35 kHz.
5. PWM fa'atonuga fa'ai'uga fa'atulagaina bit:
   Menu XX. Fa'atonuga o le 16 bit (bt16).
   Filifili i le va o le 08 = 8 bit ma le 16 = 16 bit.
6. Fa'atulagaina o amioga amata:
   Menu X. Fa'atonuga o le “taofi mau i le faavaa mulimuli” (Sb-0).
   Seti le amio amata o le masini. O le amio amata o le tulaga lea o le masini pe a uma ona toe amata poʻo pe a leai se initaneti:
   0 (via RDM: 0) – Taofi le faavaa mulimuli
   1 (e ala i le RDM: 1) – RGBW = 0%
   2 (e ala i le RDM: 2) – RGBW = 100%
   3 (e ala i le RDM: 3) - Alalaupapa 4 = 100%, alalaupapa 1 ma 2 ma 3 = 0%
   4 (e ala i le RDM: 4) - Alalaupapa 1 = 100%, alalaupapa 2 ma 3 ma 4 = 0%
   5 (e ala i le RDM: 5) - Alalaupapa 2 = 100%, alalaupapa 1 ma 3 ma 4 = 0%
   6 (e ala i le RDM: 6) - Alalaupapa 3 = 100%, alalaupapa 1 ma 2 ma 4 = 0%
   7 (e ala i le RDM: 7) - Alalaupapa 1 ma 2 = 100%, alalaupapa 3 ma 4 = 0%
   8 (e ala i le RDM: 8) - Alalaupapa 2 ma 3 = 100%, alalaupapa 1 ma 4 = 0%
   9 (e ala i le RDM: 9) - Alalaupapa 1 ma 3 = 100%, alalaupapa 2 ma 4 = 0%
   A (e ala i le RDM: 10) - Alalaupapa 1 = 100%, alalaupapa 2 = 45%, alalaupapa 3 ma 4 = 0%.

b) tamoe2:

1. Fa'atonuga moli PWM:
   Menu Seti le malamalama mo alalaupapa PWM ta'itasi.
   Muamua 1 o lona uiga o le PWM output channel 1. Filifili i le va o le 1 … 4.
   Lona lua 01 o lona uiga o le tulaga malamalama. Filifili i le va o le 00 – 0% … 99 – 99% … FL – 100% malamalama.
2. Fa'atulagaina o le malamalama o le RGB:
   MenuXX. Seti le susulu o le aafiaga o le RGB, i le aofa'i 1 … 8 tulaga o le susulu.
3. Fa'atonuga o le saoasaoa fa'atulagaina:
   Menu. Seti le aafiaga ta'alo saoasaoa, i le aofa'i 1 … 9 tulaga o le saoasaoa.
4. Fa'atulagaina o le polokalame muamua:
   Menu Filifili se polokalame suiga lanu RGB na muai fa'amalamalamaina, i le aofa'i 32 polokalame (P-XX).
   00 – RGBW tape
   01 – mūmū tumau (auala fa'aulufale 1)
   02 – lanu meamata tumau (auala o fafo 2)
   03 – Lanu lanumoana (talatala 3)
   04 – Pa'epa'e pa'epa'e (auala o fafo 4)
   05 – Samasama tumau (50% mumu + 50% lanumeamata)
   06 – Lanu moli (75% mumu + 25% lanumeamata)
   07 – Static cyan (50% lanumeamata + 50% lanumoana)
   08 – Violete tumau (50% lanumoana + 50% mumu)
   09 – Papa'e (100% mumu + 100% lanumeamata + 100% lanumoana)
   10 – RGBW 4 auala e mou atu ma mou atu e pei o le ata:16 – RGBW 4 lanu strobe
   17 – RGB fefiloi paepae (100% mumu + 100% lanumeamata + 100% lanumoana) + 4th alalaupapa W (100% paepae) strobe
   18 – 8 lanu e mou atu ma mou atu (mumu, moli, samasama, lanumeamata, cyan, lanumoana, viole, paepae (4th channel))
   19 – 8 lanu oso e sui (mumu, moli, samasama, lanumeamata, cyan, lanumoana, viole, paepae (4th channel))
   20 – 8 lanu strobe (mumu, moli, samasama, lanumeamata, cyan, lanumoana, viole, paepae (4th channel))
   21 - Mumu-paʻepaʻe (100% mumu + 100% lanumeamata + 100% lanumoana) -W (4th channel) liʻo faʻasolosolo suiga
   22 – Lanu meamata-pa'epa'e (100% mumu + 100% lanumeamata + 100% lanumoana) -W (4th channel) li'o fa'asolosolo suiga
   23 – Lanu lanumoana (100% mumu + 100% lanumeamata + 100% lanumoana) -W (4th channel) li'o faasolosolo malie
   24 – Mumu-lanu moli-W (4th channel) li'o faasolosolo malie
   25 – Ulaula-lanu-Vila (4th channel) li'o faasolosolo malie
   26 – Green-samasama-W (4th channel) li'o fa'asolosolo malie
   27 – Green-cyan-W (4th channel) li'o fa'asolosolo suiga
   28 – Blue-purple-W (4th channel) li'o fa'asolosolo malie
   29 – Blue-cyan-W (4th channel) li'o fa'asolosolo malie
   30 – Mumu-samasama-meamata-W (4th channel) li'o fa'asolosolo suiga
   31 – Mumu-lanu-lanu-lanumoana-W (4th channel) li'o faasolosolo malie
   32 – Green-cyan-blue-W (4th channel) li'o suiga malie

Toe fa'afo'i fa'aletonu Falegaosimea

Ina ia toe faʻafoʻi le tulaga le lelei o le masini, oomi ma taofi i lalo Back + Ulufale faʻatasi i le taimi e tasi seia oʻo ina tape le faʻaaliga. Ona tatala lea o faamau, toe setiina le faiga. O le faʻaaliga faʻafuainumera toe ki, toe faʻafoʻisia uma tulaga i tulaga faʻaletonu.

Faatulagaina	Tau Fa'atonu
Faiga faiga	tamoe1
Tuatusi DMX	A001
uiga DMX	4d.01
Gamma fa'aitiitiga fa'aitiitiga tau	gA1.5
Fa'aoso PWM fa'avevesi	PF04
PWM fa'ai'uga fa'ai'uga	bt16
Amioga amata	Sb-0

Fa'ailoga Su'esu'ega RDM

A fa'aogaina le RDM e su'e ai le masini, o le fa'aaliga numera o le a emo ma o moli feso'ota'i o le a emo i le taimi tutusa e fa'aalia. O le taimi lava e taofi ai le fa'aaliga, e taofi fo'i le moli feso'ota'i.

PIDs RDM lagolago:

DISC_UNIQUE_BRANCH	SLOT_DESCRIPTION
DISC_MUTE	OUT_RESPONSE_TIME
DISC_UN_MUTE	OUT_RESPONSE_TIME_DESCRIPTION
DEVICE_INFO	STARTUP_UIGA
DMX_START_ADDRESS	MANUFACTURER_LABEL
DMX_FOOTPRINT	MODULATION_FREQUENCY
IDENTIFY_DEVICE	MODULATION_FREQUENCY_DESCRIPTION
SOFTWARE_VERSION_LABEL	PWM_RESOLUTION
DMX_PERSONALITY	PALU
DMX_PERSONALITY_DESCRIPTION	CURVE_DESCRIPTION
SLOT_INFO	SUPPORTED_PARAMETERS

WWW.TRAXON-ECUE.COM
©2024 traxon tekinolosi.
Ua taofia aia tatau uma.
Faatonuga

Pepa / Punaoa

TRAXON Dimmer 4CH PWM Fua Fa'atatau Fa'atatau [pdf] Tusi Lesona a le Pule Dimmer 4CH PWM fua fa'atatau Fa'ai'uga, Dimmer 4CH PWM, fua fa'atatau o fa'ai'uga, fua fa'atatau, fua fa'atatau.

Fa'asinomaga

• Tusi Taiala