MICROCHIP TA100 24 Pad VQFN Socket Board

Folasaga

O le TA100 24-Pad VQFN mikroBUS™-compatible socket board na atia'e mo le fa'aoga i so'o se laupapa microcontroller a Microchip o lo'o lagolagoina le MikroElektronika mikroBUS interface. Ole fua ole laupapa e fetaui ma le lapopo'a fa'aopoopo i luga ole laupapa e pei ona fa'amatalaina ile fa'amatalaga mikroBUS. E ala i le fa'aogaina o se laupapa fa'apipi'i, e mafai fo'i ona fa'aoga le socket board ma Microchip microcontroller development boards e lagolagoina le Xplained Pro Interface.
O elemene saogalemu TA100 o masini e tasi-taimi-programmable. O le iai o le laupapa socket e mafai ai e se tagata fa'atau ona toe fa'aoga le laupapa e tele TA100 sample masini mo se talosaga tu'uina atu po'o mo le tele o talosaga eseese. Ole 24-Pad VQFN socket board ma le TA100 secure element e lagolagoina uma le I2C ma le SPI Interface.

Ata 1. TA100 24-Pad VQFN Socket Board

Fa'amatalaga Meafaigaluega

Fuafuaga ma Vaega Autu

• Tasi 24-Pad VQFN Socket (U1)
• Tasi le MicroBUS Connector (J1, J2)
• 4.7 kΩ I2C Resistors i luga ole laupapa (R2, R3)
• Fa'ailoga o le Malosi o le Va'a (LD1)
• Malosi (Power Jumper) mo le filifilia o le 3.3V po'o le 5V malosi (J3)
• Jumper mo le filifilia po o le fea mikroBUS pine e fesoʻotaʻi ile GPIO1 (J5)
• Filifiliga GPIO Ulutala (J4) - Le'o Fa'anofo
• Filifiliga SPI Toso i luga tete'e R4-R7 - Le'o fa'anofoina
• Filifiliga GPIO Toso i luga tete'e R9-R11 - Le'o fa'anofoina

Fa'atonu Fa'atonu
TA100 24-Pad VQFN Socket Board Jumper Configurations

• 3.3V Malosiaga: J3 ma shunt i luga ole 3V3 ma PWR tulaga
• 5.0V Malosiaga: J3 ma shunt i luga ole 5V ma PWR tulaga
• GPIO1 Fesoʻotaʻi i le IO1A: J5 ma Shunt i luga ole GPIO1 ma IO1A
• GPIO1 Fesoʻotaʻi i le IO1B: J5 ma Shunt i luga ole GPIO1 ma IO1B

Tuuina atu Fua o le taimi nei
E mafai ona fuaina le fa'aogaina o le masini TA100 i le fa'aaogaina o le EV39Y17A 24-Pad VQFN socket board. Pau lava masini i luga o le laupapa e faʻaumatia ai le eletise o le TA100 socketed device, le Power LED ma le I2C pull-up resistors. Mulimuli i laasaga nei e fua ai le taimi nei:

1. Suia le laupapa e aveese ai le tetee, R1, lea o loʻo faʻasologa ma le LED. Ole mea lea ole a aveesea ai le taimi nei e ala ile LED mai le aofa'i ole fuaina.(1)
2. Fa'apipi'i le masini TA100 i totonu o le socket.
3. Faʻapipiʻi le socket board i totonu o le faʻalapotopotoga faʻatasi ma le faʻaogaina o le eletise talafeagai.
4. Filifili pe 3.3V po'o le 5V malosiaga mo le fua.(2)
5. Fa'afeso'ota'i le itu maualuga o le ammeter i le sapalai 3.3V po'o le 5V.
6. Fa'afeso'ota'i le itu maualalo o le ammeter i le fa'ailoga masani a le PWR o le ulutala.
7. O fua o lo'o i ai nei e mafai nei ona faia e ala i le fa'atinoina o tulafono TA100 ma fuaina o le taimi nei. (3)

Fa'amatalaga: 

1. Mo le sa'o maualalo o fua o lo'o i ai nei, e mafai ona teuina lenei fa'asaga i totonu o le ta'amilosaga. E fautuaina le faia o se fua eseese o le taimi nei e ala i le ala o le LED a'o le'i fuaina le au masini TA100. E mafai la ona toese lea tau mai le aofa'i o le taimi nei e fuaina.
2. O le laupapa talimalo e tuʻuina atu le mana i le microBUS extension board, o lea poʻo fea lava sapalai e filifilia e tatau ona fetaui ma le gafatia ma le faʻaogaina o le laupapa talimalo.
3. Pe a fuaina le taimi nei o masini I2C, o le fua o le a aofia ai le I2C toso i luga o loʻo faʻaaogaina e toso i luga le pasi. Mo fa'ailoga SPI, o le toso i luga o lo'o i totonu o le masini ma o le a fa'apena fo'i i le aofa'i o lo'o fa'aaogaina.

Fa'amaumauga o Meafaigaluega
O faʻamatalaga faaopoopo mo le pusa e mafai ona maua ile Microchip webnofoaga mo le EV39Y17A.

E aofia ai:

• Fa'amaumauga a le Komiti Fa'atonu e aofia ai Fa'ailoga ma le 3D Views
• Gerber Files
• TA100 24-Pad VQFN Socket Board Taiala (EV39Y17A)

Mo isi pusa o loʻo faʻasino i lenei pepa, siaki le webfa'amatalaga nofoaga e feso'ota'i ma na pusa. E aofia ai:

• ATSAMV71-XULT SAMV71 Xplained Ultra Evaluation Kit
• ATMBUSADAPTER-XPRO XPRO i le mikroBUS Adapter
• Su'esu'e 16/32 Pusa Atina'e (DM240001-2)
• dsPIC33CK 16-Bit PIC® Microcontroller

Pusa Meafaigaluega Fa'atatau
O lo'o ofoina atu fo'i e le Microchip ni pusa socket e feso'ota'i mo isi afifi o lo'o tu'uina atu i ai le masini TA100. E aofia ai:

• O le AC164166 14-Pin SOIC Socket Kit mo le TA100 - O le pusa a le atina'e lenei e lagolagoina se masini SOIC TA14 100-pin ma le SPI ma le I2C Interface.
• O le AC164167 8-Pin SOIC Socket Kit mo le TA100 - O le pusa a le atina'e lenei e lagolagoina se masini SOIC TA8 100-pin ma se SPI po'o le I2C Interface.

Feso'ota'i le Komiti Fa'atonu

O le tulaga faʻavae o le EV39Y17A atinaʻe laupapa na filifilia ona o Microchip ua matua faʻaaogaina le faʻaogaina o le microBUS connector i luga o laupapa talimalo. Ole tele ole atina'e ole Microchip ole a lagolagoina se tasi pe sili atu feso'ota'iga mikroBUS. E aofia ai:

• Microchip Explorer 16/32 Komiti Atina'e
• MPLAB® Xpress Evaluation Board
• Komiti o Atina'e Feso'ota'iga Ta'avale
• PIC® Fiailoa Komiti
• PIC Curiosity Nano Boards
• AVR® Curiosity Nano Boards
• SAM Xplained-Pro microcontroller development boards pe a fa'aoga ile ATMBusAdapter

Xplained Pro So'oga
I le faʻaaogaina o se laupapa faʻapipiʻi, e mafai lava ona faʻaogaina le EV39Y17A atinaʻe laupapa faʻatasi ma Microchip development boards e naʻo le lagolagoina o le Xplained Pro interface. Ata 2-1 o loʻo faʻaalia ai le faʻapotopotoga atoa o le , le ATMBUSADAPTER-XPRO ma le ATSAMV71-XULT Development Board.

Ata 2-1. So'oga ile Xplained Pro Development Platform

1. EV39Y17A 24-Pad VQFN Socket Board
2. ATMBUSADAPTER-XPRO
3. ATSAMV71-XULT Komiti Atina'e
4. TARGET USB Port
5. DEBUG Taulaga USB
6. Ulufale Siaki Malosiaga i fafo

Malosiina o le SAMV71-XULT Board
E tele filifiliga e iai mo le fa'aolaina o le SAMV71-XULT Development Board. Faʻalagolago i le aofaʻi o manaʻoga o loʻo iai nei, e faʻatagaina filifiliga eseese. Va'ai le SAMV71-XULT User Guide mo nisi fa'amatalaga.

• Ulufale Siaki Malosiaga i fafo
  • 2.1 mm fa'afeso'ota'i paelo
  • 5-14V fa'aoga sapalai Ole maualuga ole taimi nei ole 2.0A
  • 12V 18W Pule Fetuuna'iga Filifiliga: Triad Magnetics WSU120-1500
• Fa'apipi'i Debugger USB So'oga; maualuga. o le 500 mA
• Feso'ota'iga USB fa'amoemoe; maualuga. o le 500 mA
• Ulutala Malosi i fafo
  • 2-pin 100 mil Ulutala
  • Tu'u sa'o 5V
  • Max. 2A o le taimi nei

ATMBUSAdapter Power Sets
O le ATMBUSAdapter e mafai ai ona faʻafesoʻotaʻi le mana i le MikroBus Host adapter pe tuusaʻo e ala i le XPRO interface poʻo le tuʻuina atu o le mana i fafo e ala i le ulutala EXT. E taua le fa'afeso'ota'i sa'o uma tagata osooso a'o le'i fa'afeso'ota'i i le SAMV71-XULT po'o isi laupapa fa'atasi ma se fa'aoga XPRO e puipuia ai le fa'aleagaina o le faiga.

1. Filifiliga 1: Faʻatonu Malosi mai le XPRO Extension
   • Fuafua pe fa'aulu e le Komiti Fa'atonu XPRO se vol. 3.3V po'o le 5.0Vtage.
   • Fa'afeso'ota'i le J3 shunt "C" o le EV39Y17A i le sapalai 3.3V po'o le 5.0V talafeagai.
   • Faʻafesoʻotaʻi le ATMBUSAdapter power shunt "A" i le vol lava e tasitage pei o le XPRO sapalai.
2. Filifiliga 2: Malosiaga i fafo Fesoʻotaʻi ile ATMBUSAdapter.
   • Aveese le Power Shunt "A" mai le ATMBUSAdapter. O lenei mea e motusia ai le mana mai le XPRO Header.
   • Faʻafesoʻotaʻi le 3.3V poʻo le 5.0V le mana fafo i le Ext Header "B" ile ATMBUSAdapter
   • Ia mautinoa o le J3 shunt i luga o le EV39Y17A o loʻo tuʻuina i luga o fesoʻotaʻiga saʻo mo le Sapalai Malosiaga i fafo ua filifilia.

Punaoa Faaopoopo

• Fa'amatalaga SAMV71 Kit
• SAMV71 Xplained Ultra User Guide
• SAMV71 Microcontroller
• Meafaigaluega fa'aopoopo e maua ile myMicrochip

Microchip Explorer 16/32 So'oga
E mafai ona fa'afeso'ota'i le laupapa fa'aopoopo EV39Y17A i so'o se laupapa microcontroller o lo'o iai se MikroBUS Host Header. O le 24-Pad VQFN socket board e aofia uma ai le I2C ma le SPI interface e pei ona faʻaalia i le 1.2 Board Configuration. O le ata o loʻo i lalo o loʻo faʻaalia ai se faʻatulagaga e faʻaaoga ai le Microchip Explorer 16/32 Development Board ma le dsPIC33CK 16-bit microcontroller. Manatua o le Explorer 16/32 laupapa e mafai ai ona faʻaaogaina 100-pin Microchip microcontrollers eseese.

Ata 2-3. So'oga ile Microchip Explorer 16/32 Development Board

1. EV39Y17A 24-Pad VQFN Socket Board
2. dsPIC33CK 16-Bit Microcontroller
3. Microchip Explorer 16/32 Bit Development Board
4. So'oga Malosi i fafo
5. So'oga Micro-USB
6. Ituaiga-A USB So'oga
7. USB Type-C™ So'oga
8. PICkit™ i luga o le laupapa debugger micro-USB So'oga

Malosiaga o le Komiti Faatino
E tele filifiliga e iai mo le fa'aolaina o le Explorer 16/32 Development board. Faʻalagolago i le aofaʻi o manaʻoga o loʻo iai nei, e faʻatagaina filifiliga eseese.

• So'oga Tulaga Malosi i fafo
  • 8-15V Malosiaga Tuuina atu aupito maualuga i le taimi nei 1.3A
  • Universal 9V Tuuina atu Fetuunai: AC002014
• USB So'oga fa'atagaina e o'o atu i le 400 mA

Punaoa Faaopoopo

• Microchip Explorer 16/32 Fa'amatalaga Kit
• Microchip Explore16/32 User Guide
• dsPIC33CK
• Meafaigaluega fa'aopoopo fa'akomepiuta e maua ile myMICROCHIP

Feso'ota'iga Komiti Atina'e Feso'otaiga Ta'avale
E mafai ona fa'afeso'ota'i le laupapa fa'aopoopo EV39Y17A i so'o se laupapa microcontroller o lo'o iai se MikroBUS Host Header. O le 24-Pad VQFN socket board e aofia uma ai le I2C ma le SPI interface e pei ona faʻaalia i le 1.2 Board Configuration. O le ata o loʻo i lalo o loʻo faʻaalia ai le Automotive Networking Development Board. O lenei laupapa ose faiga tau atina'e taugofie mo Microchip's 8-bit, 16-bit ma 32-bit microcontrollers e fa'atatau i CAN ma LIN feso'otaiga feso'otaiga.

Ona o le natura faʻapitoa o le Automotive Networking Development Board, naʻo se ata lautele o le laupapa o loʻo faʻaalia i lalo. E tele LIN ma CAN Controllers e mafai ona fa'afeso'ota'i e ala i feso'ota'iga mikroBUS fa'atasi ai ma le EV39Y17A socket security board. O nei masini ta'itasi e mafai ona feso'ota'i e ala i so'o se ulutala mikroBUS. E mana'omia fo'i le 100-pin plug-in microcontroller module (PIM) mo le fa'aogaina atoatoa o le polokalama. Microchip o loʻo i ai le tele o modules PIM e mafai ona faʻaogaina i lenei laupapa atinaʻe. Example itiiti o microBUS kiliki laupapa ma PIM modules o loʻo faʻaalia i le vaega o Punaoa Faaopoopo.

Ata 2-4. Feso'ota'iga i le Komiti o Atina'e Feso'ota'iga Ta'avale

1. Komiti o Atina'e Feso'ota'iga Ta'avale
2. MikroBUS™ Ulufale talimalo
3. Microcontroller PIM Socket
4. So'oga Malosi i fafo
5. Micro-USB Power/Signal Connection

Malosiaga o le Komiti Faatino
E tele filifiliga e iai mo le fa'aolaina o le Automotive Networking Development Board.

• So'oga Tulaga Malosi i fafo (7-30V)
  • 9V fa'apipi'i mana tu'uina atu i fafo: (AC002014) 1.3A i le taimi nei
  • 5mm jack output ma le ogatotonu-lelei feso'ota'iga
  • Tuu le osooso i pine 2-3 o le ulutala J28 e mafai ai
• So'oga USB
  • So'oga Micro-USB
  • Tuu le osooso i pine 1-2 o le ulutala J28 e mafai ai

Punaoa Faaopoopo
O le lisi o loʻo i lalo o loʻo tuʻuina atu aiample tele o punaoa eseese e maua ma e le'o atoatoa. Ina ia iloa nisi PIM poʻo mikroBUS modules e mafai ona galulue ma le Automotive Networking Development Board, alu i www.microchip.com.

• Fa'amatalaga a le Komiti Fa'afoe o Atina'e Feso'otaiga Ta'avale
• Ta'iala a le Komiti o Atina'e Feso'otaiga Ta'avale
• MCP2003B kiliki mo faiga LIN
• MCP25625 kiliki i le Microchip CAN pule
• ATA6563 kiliki i le Microchip CAN pule
• PIC18F66K80 100-pin PIM
• O mea faigaluega fa'aopoopo e maua ile myMicrochip

Meafaigaluega

O le TA100 o lo'o lagolagoina e se seti o meafaigaluega fa'akomepiuta. O nei meafaigaluega e na'o le NDA e maua. Fa'afeso'ota'i le Microchip e maua mai ai se NDA ma talosagaina le avanoa i meafaigaluega. O le taimi lava e sainia ai se NDA, o nei meafaigaluega e maua i le My Secure Software vaega o le myMicrochip account a le tagata faatau. Fa'alelei, fa'aleleia ma mea faigaluega fa'aopoopo e otometi lava ona fa'aavanoaina i so'o se tagata fa'atau e mafai mo le lagolago TA100.

Laulau 3-1. TA100 Software Tools

mea #	Igoa Meafaigaluega	Fa'amatalaga
1	TA100 Configurator GUI ma TA100 Faletusi	O le TA100 Configurator GUI e maua ai le gafatia e faʻapipiʻi ma pseudo-provision TA100 masini, ma faʻaalia pe faʻafefea ona faʻaogaina le TA100 mo faʻaoga eseese e pei ole Secure Boot, Device Authentication ma CAN-MAC. O nei tusi talosaga e fa'atino ai le tele o galuega fa'ata'oto e fa'aaoga ai le faletusi TA100.
2	CryptoAuthLib	Ose faletusi fetu'una'i ua fa'atinoina ma le Hardware Abstraction Layer (HAL) e mafai ai ona fa'anofo faigofie le TA100 i isi masini fa'amalo. O lo'o tu'uina atu e le faletusi le lagolago mo le TA100 ma isi masini Microchip CryptoAuthentication™ e fa'atelevaveina le atina'eina o talosaga.
3	AUTOSAR™ 4.3.1 CRYPTO aveta'avale(1)	O fa'amatalaga ta'avale a le CRYPTO e tu'uina atu ai se fa'aputuga e tu'ufa'atasia ai se masini fa'ata'oto mai fafo, e pei o le TA100, i totonu o le fa'aputuga AUTOSAR™. Lenei e mafai ai ona feavea'i le code i le va o talosaga eseese e faaaoga ai microcontrollers eseese.

Taua: 

Mo galuega faatino e fa'aoga ai le Aveta'avale AUTOSAR, e mana'omia fo'i le AUTOSAR™ Reference Stack.
O le AUTOSAR™ o se fausaga fa'akomepiuta ta'avale matala ma fa'ata'atia. O le TA100 o lo'o tu'ufa'atasia i le 3rd party AUTOSAR™ software stacks e fesoasoani ai i tagata fa'atau i le fa'atinoina o mea tau ta'avale. Fa'afeso'ota'i le Microchip mo se lisi o fa'atau fa'aputuga a le 3rd Party AUTOSAR™ e lagolagoina le TA100.

Fa'aaoga le Fa'amatalaga Examples
Fa'aaoga le Fa'asinomaga exampfa'aaoga le TA100 Configurator GUI e fa'aalia ai s eseeseample talosaga e mafai ona faʻatinoina e faʻaaoga ai le TA100 ma le SAM V71 microcontroller. O nei sampO talosaga e sau ma le microcontroller firmware e mana'omia, fa'amatalaga ta'iala mo le fa'aoga ma isi fa'amaumauga e fa'amatala atili ai le fa'aogaina. O le Siata 3-2 o lo'o tu'uina atu ai nisi o tulaga fa'aoga e peiampo lo'o maua mai le myMicrochip webnofoaga. Fa'alelei i nei fa'aoga tulaga eamptusi ma isi fa'aoga fa'aoga fa'atasiampo le a tu'uina atu i le aluga o taimi e ala i le ala lava e tasi.

Laulau 3-2. Fa'aaoga le Fa'amatalaga Examples

mea #	Fa'aaoga le Fa'amatalaga Examples(1)	Fa'amatalaga
1	Fa'amautuga o masini	Tuuina atu le faʻamaoniaina o masini e ala i le faʻamaonia o le filifili o le faʻatuatuaga e faʻaaoga ai Tusi Faamaonia ma Mea Faʻamaonia ma se Luʻi Faʻafuaseʻi. A mae'a le fa'amaoni, o se manoa iloa e fa'ailogaina ma tusia i se elemene fa'amaumauga pe faitau ma fa'ate'aina mai se elemene fa'amaumauga i totonu o le TA100.
2	Va'a Saogalemu o lo'o teuina atoa ma le mua'i-Boot	Secure Boot use case lea, i luga o le uluaʻi seevae, e faʻatatau le faʻaogaina o le firmware code ma, faʻapipiʻi mo se faʻavave faʻamaufaʻailoga mulimuli.
3	CAN Bootloader	Secure Boot use case lea e mafai ai ona toe fa'aleleia le firmware e ala i le CAN Bus e fa'aaoga ai le SAMV71 microcontroller, K2L MOCCA-FD tool ma PC-based GUI.

4

CAN-MAC Fa'amaoni

O lenei fa'aoga fa'aoga e fa'aalia ai se faiga e fa'aopoopo ai se AES C-MAC e fa'amaonia ai fe'au CAN-FD. O lenei masini e mafai ona faʻaogaina e faʻamautinoa ai le faʻamaoni o faʻamatalaga ma le faʻamaoni o le node felauaiga. TA-configurator GUI o le a faaulufale mai se CAN-faʻamaumauga file e fa'atumu le CAN-MAC tab o le GUI. E mafai e le tagata faʻaoga ona faʻaoga le TA-configurator GUI e filifili ai poʻo fea feʻau e manaʻomia le faʻamaonia, tuʻuina atu C-MAC ki ma faʻapipiʻi le faʻatulagaina o le utaina o feʻau.

Fa'aaliga: 

1. Le lisi fa'aoga tulaga exampe fa'avae ile TA100Lib ma le TA Configurator GUI.

la'uMicrochip
O le Microchip e maua ai le tomai e fa'avasega ai lou tagata fa'aoga ma fa'afou oe i mataupu autu e sili ona taua ma taua ia te oe e ala i le lesitala mo se myMicrochip account. Ina ia maua le tele o meafaigaluega faakomepiuta TA100, e tatau ona i ai sau tala. O nei mea faigaluega e mafai ona maua e ala i le faʻaogaina o le Secure Document Access. O le mauaina o le avanoa e otometi lava ona e maua ai le avanoa i fa'afouga meafaigaluega ma meafaigaluega fou a'o fa'aopoopoina.

Avanoa i la'uMicrochip

1. Alu ile myMicrochip webnofoaga: www.microchip.com/mymicrochip.
2. Afai e leai sau tala, kiliki le "Resitala mo se teugatupe", faʻatumu le faʻamatalaga, ona faʻasaoina lea o lau profile.
3. O le taimi lava e te lesitala atoatoa ai, e mafai ona e ulufale i totonu e ala i le itulau avanoa i le Laasaga 1.
4. A uma ona e ulufale i totonu, alu i My Preferences ma faʻatagaina le Secure Documents Access. E mafai foi ona e setiina isi mea e fiafia i ai i le taimi nei.
5. A uma ona e setiina au mea e te fiafia i ai, alu i le pito i lalo o le itulau ma ia mautinoa e te kiliki Save Preferences.
6. Ina ia maua avanoa i nei mea files, e te mana'omia se NDA. Afai e le'i iai sau NDA, galue ma lau sui fa'atau Microchip e maua se NDA.
7. O le taimi lava e te maua ai le NDA, mulimuli i faatonuga i luga o le web'upega tafaʻilagi poʻo le lafoina o se imeli faʻatasi ai ma le faʻailoga saini a le NDA faʻatasi ai ma se talosaga e faʻaoga i afifi polokalama saogalemufiles@microchip.com. O lenei pepa o le a tuʻuina atu i pule talafeagai o le vaega. O le taimi lava e fa'aopoopoina ai lou igoa, o le a e mauaina se imeli e logoina oe i le avanoa o le polokalama.

Personal myMicrochip Itulau
O le taimi lava e te ulufale ai i lau myMicrochip account, o lau itulau dashboard o le a faʻaalia tutusa ma le Ata 3-2. I lalo o le Products tab o se lisi o au pepa faʻamautu uma, polokalama, ma isi. O le kiliki i luga o fesoʻotaʻiga eseese ma le faʻatulagaina o mea e te manaʻo ai e maua ai e oe le avanoa faʻapitoa i mea uma i totonu o le Microchip e fetaui ma oe.

Ata 3-2. myMicrochip Dashboard

Toe Iloilo Tala'aga

Toe Iloiloga	Aso	Fa'amatalaga
A	10/2021	Fa'alauiloa muamua o lenei pepa

Le Microchip Webnofoaga

Microchip e maua le lagolago i luga ole laiga e ala i la matou webnofoaga i www.microchip.com/. Lenei web'upega tafa'ilagi e fa'aoga e fai ai files ma fa'amatalaga faigofie ona maua e tagata fa'atau. O nisi o mea e maua e aofia ai:

• Lagolago oloa - Pepa o faamatalaga ma mea sese, tusi talosaga ma samppolokalame, punaoa mamanu, ta'iala a le tagata fa'aoga ma pepa lagolago mo meafaigaluega, fa'asalalauga fou fa'akomepiuta ma polokalama fa'amaumauga
• Lagolago Fa'atekinisi Lautele - Fesili e Fai soo (FAQs), talosaga lagolago faʻapitoa, vaega faʻatalanoa i luga ole laiga, Microchip design partner programme list
• Pisinisi o Microchip – Filifilia oloa ma taʻiala faʻatonu, faʻasalalauga lata mai a le Microchip, lisi o semina ma mea na tutupu, lisi o ofisa faʻatau Microchip, tufatufaina ma sui fale gaosi oloa

Au'aunaga Fa'asilasilaga Suiga o Mea

O le auaunaga fa'asilasilaga suiga o oloa a Microchip e fesoasoani e fa'amautu ai tagata fa'atau i oloa Microchip. O le a maua e le au fai saofaga le faʻamatalaga imeli i soʻo se taimi e iai suiga, faʻafouga, toe teuteuga poʻo mea sese e fesoʻotaʻi ma se aiga o oloa faʻapitoa poʻo meafaigaluega atinaʻe e fiafia i ai.
Ina ia lesitala, alu i www.microchip.com/pcn ma mulimuli i faatonuga o le resitalaina.

Lagolago Tagata Fa'atau

O tagata fa'aoga o oloa Microchip e mafai ona maua fesoasoani e ala i le tele o auala:

• Fa'asoa po'o le Sui
• Ofisa Fa'atauga Fa'alotoifale
• Embedded Solutions Engineer (ESE)
• Lagolago Fa'atekinisi

E tatau i tagata fa'atau ona fa'afeso'ota'i le latou tufatufaina, sui po'o le ESE mo le lagolago. O loʻo avanoa foʻi ofisa faʻatau i le lotoifale e fesoasoani i tagata faʻatau. O lo'o iai se lisi o ofisa fa'atau ma nofoaga i totonu o lenei pepa.
E maua le lagolago fa'apitoa e ala ile webnofoaga i: www.microchip.com/support

Fa'ailoga Puipuiga o Fa'ailoga Fa'atonu a Microchip

Manatua faʻamatalaga o loʻo i lalo o le faʻaogaina o le puipuiga o tulafono i luga o oloa Microchip:

• O oloa Microchip e fetaui ma faʻamatalaga o loʻo i totonu o la latou Pepa Faʻamatalaga Microchip.
• E talitonu Microchip o lona aiga o oloa e saogalemu pe a faʻaaogaina i le auala faʻamoemoeina, i totonu o faʻamatalaga faʻaogaina, ma i lalo o tulaga masani.
• Microchip fa'atauaina ma puipuia fa'amalosi ana aia tatau tau meatotino. O taumafaiga e soli le tulafono o le puipuiga o le oloa Microchip e matua fa'asaina ma e ono solia ai le Digital Millennium Copyright Act.
• E le mafai e le Microchip poʻo se isi mea gaosi semiconductor ona faʻamaonia le saogalemu o lana tulafono. O le puipuiga o tulafono laiti e le o lona uiga tatou te faʻamautinoa o le oloa e "le mafai ona motusia". O le puipuiga o tulafono laiti o lo'o fa'asolosolo pea. Microchip ua tuuto atu i le faʻaauauina pea o le faʻaleleia atili o uiga puipuia o tulafono a tatou oloa.

Faasilasilaga Faaletulafono

O lenei lomiga ma faʻamatalaga o loʻo i totonu e mafai ona faʻaaogaina naʻo oloa Microchip, e aofia ai le mamanu, suʻega, ma tuʻufaʻatasia oloa Microchip ma lau talosaga. O le fa'aogaina o nei fa'amatalaga i so'o se isi lava faiga e solia ai nei aiaiga. O fa'amatalaga e uiga i le fa'aogaina o masini e tu'uina atu mo na'o lou fa'amalieina ma e ono suia i fa'afouga. O lau matafaioi le faʻamautinoa o lau talosaga e fetaui ma au faʻamatalaga. Fa'afeso'ota'i lou ofisa fa'atau Microchip fa'apitonu'u mo se lagolago fa'aopoopo pe, maua se lagolago fa'aopoopo ile www.microchip.com/en-us/support/design-help/client-support-services.

O LENEI FAʻAMATALAGA E TUUINA E MICROCHIP "AS IS". E LEAI FAIA e le MICROCHIP ni sui po'o se fa'amaoniga o so'o se ituaiga pe fa'aalia pe fa'aali, tusia pe tugutu, tulāfono po'o se isi mea, e feso'ota'i ma fa'amatalaga e aofia ai ae le tapula'a i so'o se fa'amaoniaga fa'amaonia, fa'amaonia, ma le fa'amaoniaina. FAAMOEMOEGA, POO WARRANTY E FAI I ONA TULAGA, TULAGA, POO LE FAIGALUEGA.

E LEAI SE MEA E TATAU AI MICROCHIP MO SO'O SE FA'AMATALAGA, FA'AMATALAGA, FA'ASA'OGA, FA'AMATALAGA, PO'O LE FA'A'ALI'AGA MA'U'U, FA'AFIA, TAU, PO'O LE TU'U'UINA O SO'O SE I'UGA SO'O SE FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA, PE'O LE MEA NA FA'AUPUNA'I, E tusa lava pe fa'aletonu. FA'ATONU POO LE FA'AFIA E FA'AVAEINA. I LE AGATOGA FA'AALIGA E LE TULAFONO, O LE UMA AOFA'IGA A MICROCHIP I TOTOGI UMA I SO'O SE AUALA E FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA E LE'A LOLOA I LE TOTOGI O TOTOGI, AFAI E IAI, NA E TOTOGI SA'O I LE MICROCHIP MO LE FA'AMATALAGA.

O le fa'aogaina o masini Microchip i le tausiga o le ola ma/po'o le saogalemu o lo'o i le tulaga lamatia o le tagata fa'atau, ma e malie le tagata fa'atau e puipuia, fa'aleaga ma taofia Microchip le afaina mai so'o se mea leaga, tagi, suti, po'o tupe alu e mafua mai i lea fa'aoga. E leai ni laisene e tu'uina atu, fa'aalia po'o se isi mea, i lalo o so'o se Microchip aia tatau tau le atamai se'i vagana ua ta'ua.

Fa'ailoga Fa'ailoga
Le igoa Microchip ma le logo, le Microchip logo, Adaptec, AnyRate, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus maXTouch, MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash , Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ma XMEGA o fa'ailoga fa'amaufa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed ​​Control, HyperLight Load, IntelliMOS, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, WinPath, ma ZL o faʻailoga resitalaina o Microchip Technology Incorporated i Amerika.

Taofi Fa'aigoa Fa'atasi, AKS, Analog-for-the-Digital Age, So'o se Capacitor, So'o se In, So'oOut, Suiga Fa'aopoopo, BlueSky, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching , ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Parallel, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Faʻamaonia logo, MPLIB, MPLINK, MultiTRAK, NetDetach, NVM Express, NVMe, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE , Ripple Blocker, RTAX, RTG4, SAM-ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Endurance Aofa'i, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ma ZENA o fa'ailoga fa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.

SQTP ose fa'ailoga tautua a Microchip Technology Incorporated i Amerika
O le logo Adaptec, Frequency on Demand, Silicon Storage Technology, Symmcom, ma Trusted Time o fa'ailoga fa'amaufa'ailoga a Microchip Technology Inc. i isi atunu'u.
GestIC ose fa'ailoga fa'amaufa'ailoga a Microchip Technology Germany II GmbH & Co. KG, ose lala o Microchip Technology Inc., i isi atunu'u.
O isi fa'ailoga tau fefa'ataua'iga uma o lo'o ta'ua ii o meatotino a latou kamupani.
© 2021, Microchip Technology Incorporated ma ona lala. Ua Taofia Aia Tatau Uma.
ISBN: 978-1-5224-8647-3

Faiga Fa'atonuga
Mo faʻamatalaga e uiga i Microchip's Quality Management Systems, faʻamolemole asiasi www.microchip.com/quality.

Fa'atauga ma Au'aunaga i le Lalolagi Atoa

AMERIKA

Ofisa Autasi
2355 Sisifo Chandler Blvd. Chandler, AZ 85224-6199 Telefoni: 480-792-7200
Fax: 480-792-7277 Lagolago Fa'atekinisi: www.microchip.com/support

Web tuatusi: www.microchip.com

Niu Ioka, NY
Telefoni: 631-435-6000

Kanata - Toronto
Telefoni: 905-695-1980
Fax: 905-695-2078

Ausetalia – Sini
Telefoni: 61-2-9868-6733

Saina - Beijing
Telefoni: 86-10-8569-7000

Initia – Bangalore
Telefoni: 91-80-3090-4444

Iapani - Osaka
Telefoni: 81-6-6152-7160
Iapani - Tokyo
Telefoni: 81-3-6880-3770

Italia – Milan
Telefoni: 39-0331-742611
Fax: 39-0331-466781

© 2021 Microchip Technology Inc. ma ona lala

Pepa / Punaoa

MICROCHIP TA100 24 Pad VQFN Socket Board [pdf] Taiala mo Tagata Fa'aoga TA100, 24 Pad VQFN Socket Board, TA100 24 Pad VQFN Socket Board, VQFN Socket Board, Socket Board, Board, EV39Y17A

Fa'asinomaga

• Tusi Taiala