DVP-SX2
Pepa o Faatonuga

DVP-SX2 Polokalama Logic Controllers

Faafetai mo le filifilia o Delta DVP-SX2. DVP-SX2 o se 20-point (8DI + 6 DO + 4AI + 2AO) PLC MPU, e ofoina atu faatonuga eseese ma o loʻo i ai ma le 16k laasaga manatua polokalame, e mafai ona faʻafesoʻotaʻi ma faʻataʻitaʻiga faʻaopoopo faʻasologa Slim uma, e aofia ai numera numera / faʻaogaina (max. 480 faʻaoga faʻapipiʻi / faʻapipiʻi mea faʻapipiʻi), modules analog (A / D, D / A suiga ma iunite vevela) ma ituaiga uma o faʻaopoopoga faʻaopoopoga maualuga-saosaoa modules. O lona 2-vaega maualuga-saosaoa (100kHz) galuega fa'alia ma le tasi 2-axis interpolation faatonuga fou.
faamalieina ituaiga uma o talosaga. DVP-SX2 e laʻititi laʻititi, ma e mafai ona faʻapipiʻi faigofie.
E le tatau i tagata fa'aoga ona fa'apipi'i so'o se ma'a ile DVP-SX2 fa'asologa PLCs. O polokalame a le PLC ma fa'amaumauga o lo'o fa'amauina o lo'o teuina i totonu o manatuaga moli televave.
  DVP-SX2 o se masini OPEN-TYPE. E tatau ona fa'apipi'i i totonu o se kapoti fa'atonu e aunoa ma le pefu o le ea, susu, te'i eletise ma le vibration. Ina ia puipuia le aufaigaluega e le o tausia mai le faʻaogaina o le DVP-SX2, poʻo le puipuia o se faʻalavelave faʻafuaseʻi mai le faʻaleagaina o le DVP-SX2, o le kapeneta faʻatonutonu lea e faʻapipiʻi ai le DVP-SX2 e tatau ona faʻapipiʻiina ma se puipuiga. Mo example, le kapeneta pule lea e faʻapipiʻi ai DVP-SX2 e mafai ona tatalaina i se meafaigaluega faʻapitoa poʻo se ki.
AUA LE fa'afeso'ota'i le eletise AC i so'o se I/O fa'amau, a leai e ono tupu tele se fa'aleagaina. Fa'amolemole toe siaki uma uaea a'o le'i fa'aola le DVP-SX2. A uma ona motusia le DVP-SX2, aua ne'i pa'i i so'o se fa'amau i se minute. Ia mautinoa o le nofoaga autu i luga ole DVP-SX2 ua fa'avae sa'o ina ia puipuia ai fa'alavelave fa'aeletise.

Oloa Profile

Fa'amatalaga Fa'aeletise

Mea Fa'ata'ita'i	DVP20SX211R	DVP20SX211T	DVP20SX211S
Paoa sapalai voltage	24VDC (-15% ~ 20%) (faʻatasi ai ma puipuiga faʻasaga i luga o le polarity o le mana faʻaoga DC) DVPPS01(PS02): faʻaoga 100-240VAC, galuega faatino 24VDC/1A(PS02: 2A)
Fa'aoso a'e	Max. 7.5A@24VDC
Malosiaga fuse	2.5A/30VDC, Kisi Poly
Fa'aaogāga malosi	4.7W	4W	4W
Tete'e puipui	> 5MΩ (uma I/O fa'asino-i-le-eleele: 500VDC)
Puipuia le pisa	ESD (IEC 61131-2, IEC 61000-4-2): 8kV Ea La'uina EFT (IEC 61131-2, IEC 61000-4-4): Laina Malosiaga: 2kV, Digital I/O: 1kV, Analog & Feso'otaiga I/ O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m Si'i (IEC 61131-2, IEC 61000-4-5): Uaea eletise DC: tulaga eseese ± 0.5 kV analog I/O, RS-232, USB (talipupuni): Faiga masani ±1 kV numera I/O, RS-485 (le fa'asalaina): Faiga masani ±1 kV
Fa'avae	Ole lautele ole uaea fa'avae e le mafai ona la'ititi nai lo le lautele ole uaea 24V ma le 0V (O iunite DVP uma e tatau ona fa'amau sa'o i le pou o le eleele).
Fa'agaioiga / teuina	Fa'agaioiga: 0°C ~ 55°C (temp.), 50 ~ 95% (sūsū), Filogia tikeri2 Teuina: -25°C ~ 70°C (temp.), 5 ~ 95% (sūsū)
Tete'e/tete'e	Tulaga fa'avaomalo: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea)
mamafa (g)	243g	224g	227g

Fa'amatalaga. Aitema		Fa'aulufalega
		24VDC (-15% ~ 20%) fa'aoga tasi uafu masani
Ulufale Nu.		X0, X2	X1, X3	X4 ~ X7
Ituaiga fa'aofi		DC (SINK po'o SOURCE)
Ulufale i le taimi nei (± 10%)		24VDC, 5mA
Fa'alavelave fa'aoga		4.7K Aue
Tulaga fa'atino	Pepe⭢A	> 15VDC
	On⭢Pe	<5VDC
Taimi tali	Pepe⭢A	<2.5μs	<10μs	<20us
	On⭢Pe	<5μs	<20μs	<50us
Filifili taimi		Fa'atonu i totonu ole 0 ~ 20ms ile D1020 (S'oa'i: 10ms)

Faʻamatalaga.		Vaega o Galuega
Aitema		Fa'ata'avale	Transistor
Galuega Numera		Y0 ~ Y5	Y0, Y2	Y1, Y3	Y4, Y5
Max. taimi		1Hz	100kHz	10kHz	1kHz
Galulue voltage		250VAC, <30VDC	5 ~ 30VDC #1
Max. uta	Tetee	1.5A/1 togi (5A/COM)	SX211T: 0.5A/1 togi (3A/ZP) SX211S: 0.3A/1 togi (1.8A/UP)
	Faʻaola	#2	15W (30VDC)
	Lamp	20WDC/100WAC	2.5W (30VDC)
Taimi tali	Pepe⭢A	Pe tusa. 10 ms	2μs	20μs	100μs
	On⭢Pe		3μs	30μs	100μs

#1: DVP20SX211T: UP, ZP e tatau ona galulue faatasi ma le sapalai malosi fesoasoani fafo 24VDC (-15% ~ + 20%), fa'atatau le taumafaina. 3mA/mata.
DVP20SX211S: UP, ZP e tatau ona galulue faatasi ma le sapalai malosiaga fesoasoani fafo 5 ~ 30VDC, fuaina taumafa approx. 5mA/mata.

A/D ma D/A Fa'amatalaga

Aitema	Tulaga Fa'atusa (A/D)			Tulaga Fa'atusa (D/A)
	Voltage	I le taimi nei		Voltage	I le taimi nei
Analog I/O laina	±10V	±20mA	4 ~ 20mA#1	±10V	0 ~ 20mA	4 ~ 20mA#1
Fa'aliliuga numera numera	±2,000	±2,000	0 ~ +2,000	±2,000	0 ~ +4,000	0 ~ +4,000
I'ugafono #2	12-bit
Fa'alavelave fa'aoga	> 1MΩ	250Ω		–
O le faapalepale na maua ai le impedance	–			≥ 5KΩ	≤ 500Ω
Sa'o atoatoa	Sa'o le laina laina: ±1% o le fua atoa i totonu o le tele o le PLC fa'aogaina vevela Ole maualuga ole va'aiga: ±1% ole fua atoa ile 20mA ma le +10V
Taimi tali	2ms (fa'atulaga ile D1118) #3			2ms #4
Avanoa fa'aoga atoatoa	±15V	±32mA		–
Fa'asologa o fa'amaumauga numera	2's faʻapipiʻi o le 16-bit, 12 mea taua
Galuega masani	Tuuina atu (fa'atulaga ile D1062) #5			–
Auala faaesea	Leai se fa'aesea i le va o numera numera ma analog circuit
Puipuiga	VoltagE iai le puipuiga o le ta'avale pu'upu'u, ae o le umi o le ta'amilosaga pu'upu'u e mafai ona fa'aleagaina ai uaea i totonu ma tatala ai le va'aiga o lo'o iai nei.

#1: Fa'amolemole silasila ile fa'amatalaga auiliili ole D1115.
#2: Fua fa'atatau

Tulaga Fa'atusa (A/D)		Tulaga Fa'atusa (D/A)
Voltage	I le taimi nei	Voltage	I le taimi nei
(5mV = 20V ) 4000	(10μΑ = 40mA) 4000	(5mV = 20V ) 4000	(5μΑ = 20mA) 4000

#3: Pe a umi atu le vaitaimi fa'ata'ita'i nai lo le 2ms po'o le tau fa'atulagaina, o le fa'atulagaina o le a mulimuli i le va'aiga taimi.
#4: Pe a umi atu le vaitaimi o le su'esu'ega nai lo le 2ms, o le a mulimuli le fa'atulagaga i le vaitaimi fa'ata.
#5: Pe a sampling range o le "1", o le tau o le taimi nei o le a faitau.

I/O Configuration

Fa'ata'ita'iga	Ulufale		Tuuina atu		I/O faatulagaga
	Fa'asino	Ituaiga	Fa'asino	Ituaiga	Fa'ata'avale	NPN	PNP
20SX211R	8	DC (Sink Po'o Puna)	6	Fa'ata'avale
20SX211T				NPN Transistor
20SX211S				PNP Transistor
SX2-R/T/S	4	Faʻaaoga Analogi	2	Galuega fa'atusa

Tulaga & Faʻapipiʻiina

Fa'amolemole fa'apipi'i le PLC i totonu o se pa puipui ma lava le avanoa fa'ata'ali'oli'o e fa'ataga ai le fa'a'ese'ese o le vevela, e pei ona fa'aalia i le [Ata 5].

• Fa'apipi'i sa'o: Fa'amolemole fa'aaoga le sikulima M4 e tusa ai ma le tele o le oloa.
• DIN Rail Mounting: Pe a faʻapipiʻi le PLC i le 35mm DIN rail, ia mautinoa e faʻaoga le kilipa taofi e taofi ai soʻo se itu-i-itu feʻaveaʻi o le PLC ma faʻaitiitia ai le avanoa o uaea e matala. O le kilipa taofi o loʻo i le pito i lalo ole PLC. Ina ia malupuipuia le PLC i
  DIN rail, toso i lalo le kilipa, tuu i luga o le nofoa afi ma tulei lemu i luga. Ina ia aveese le PLC, toso le kilipa taofi i lalo ma se sikuli mafolafola ma aveese malie le PLC mai le DIN rail.

Uaea

1. Fa'aaoga le 26-16AWG (0.4~1.2mm) tasi pe tele uaea autu ile I/O uaea fa'amau. Va'ai le ata i le itu taumatau mo lona fa'amatalaga. E tatau ona fa'amau fa'amau fa'ailoga fa'amau a le PLC i le 2.0 kilokalama-cm (1.77 in-lbs) ma fa'amolemole fa'aaoga na'o le 60/75ºC fa'aulu kopa.
2. AUA LE uaea avanoa avanoa ma tuu le uaea faailo I/O i le laina uaea tutusa.
3. AUA LE tu'u se tama'i ta'avale u'amea i totonu ole PLC a'o viliina ma uaea. Ta'e ese le mea fa'apipi'i i luga o le pu e fa'afefe ai le vevela mo le puipuia o mea mai fafo mai le pa'u i totonu, ia mautinoa le fa'amama masani o le vevela o le PLC.

Uea saogalemu

Talu ai o le DVP-SX2 e na'o le feso'ota'iga ma le sapalai DC, o fa'aoga eletise Delta (DVPPS01/DVPPS02) e talafeagai mo le DVP-SX2. Ua fautuaina tagata fa'aoga e fa'apipi'i le ta'amilosaga o le puipuiga i le fa'aogaina o le eletise e puipuia ai le DVPPS01 po'o le DVPPS02. Va'ai le ata i lalo.

1. AC mana tu'uina atu: 100 ~ 240VAC, 50/60Hz
2. Tu'u
3. Fa'alavelave fa'afuase'i: O lenei ki e tipi ese ai le paoa eletise pe a tupu fa'afuase'i fa'afuase'i.
4. Fa'ailoga mana
5. AC mana sapalai uta
6. Fusi fa'asa'o o le eletise (2A)
7. DVPPS01/DVPPS02
8. DC mana tu'uina atu galuega: 24VDC, 500mA
9. DVP-PLC (iunite galue autu)
10. Module numera I/O

Paoa sapalai

Ole fa'aogaina ole malosiaga ole DVP-SX2 fa'asologa ole DC. Pe a faʻaogaina le DVP-SX2 faʻasologa, faʻamolemole ia matau manatu nei:

1. O loʻo fesoʻotaʻi le mana i pito e lua, 24VDC ma 0V, ma le tele o le mana o le 20.4 ~ 28.8VDC. Afai o le malosiaga voltage itiiti ifo nai lo le 20.4VDC, PLC o le a taofi le taʻavale, o galuega uma o le a alu "Off" ma faʻailoga ERROR o le a faʻaauau pea ona moli.
2. O le tapuni malosi e itiiti ifo i le 10 ms o le a le afaina ai le faʻaogaina o le PLC. Ae ui i lea, taimi tapuni malosi e umi tele po o le pa'ū o le malosiaga voltago le a taofi le fa'agaioiga o le PLC ma o mea uma e fa'atino o le a pe. A toe foʻi le mana i le tulaga masani, o le PLC o le a otometi lava ona toe faʻaaogaina. (E tatau ona faʻaeteete i le faʻaogaina o fesoʻotaʻiga fesoasoani ma resitala i totonu ole PLC pe a fai polokalame).

Uea Fa'asinomaga
E 2 ituaiga o mea fa'aoga DC, SINK ma le SOURCE. (Vaai i le exampi lalo. Mo au'ili'ili fa'asologa o fa'ailoga, fa'amolemole va'ai i fa'amatalaga o fa'ata'ita'iga ta'itasi.)

Uaea Fa'afua

1. DVP-SX2 fa'asologa o lo'o i ai ni fa'aoga e tolu, fa'asalalau ma transistor (NPN/PNP). Ia nofouta i le feso'ota'iga o fa'amau fa'asoa pe a fa'amauina fa'amau fa'aulu.
2. Output terminals, Y0, Y1, ma Y2, o faʻataʻitaʻiga faʻataʻitaʻiga faʻaaogaina C0 uafu masani; Y3, Y4, ma le Y5 fa'aoga C1 uafu masani; e pei ona faaalia i le [Ata 9]. A fa'agaoioi vaega o mea e fai ai galuega, o le a fa'aola a latou fa'ailoga tutusa i le pito i luma.
3. O laina fa'aulu Y0~Y5 o le transistor (NPN) fa'ata'ita'iga e feso'ota'i i laina masani UP ma ZP. Va'ai [Ata 10a]. O faʻamau faʻamau Y0 ~ Y5 i luga o le transistor (PNP) faʻataʻitaʻiga e fesoʻotaʻi i laina masani UP ma ZP. Va'ai [Ata 10b].
4. Tu'u'esega va'ava'ai: O le fa'aoga fa'apipi'i e fa'aogaina e tu'u'ese'ese ai fa'ailo i le va o le matagaluega i totonu o le PLC ma fa'aoga fa'aoga.
   Relai (R) uaea fa'aulu

1. DC sapalai eletise
2. Taofi fa'afuase'i: Fa'aaogā ki fafo
3. Fuse: Fa'aaoga le fuse 5~10A i le laina fa'asoa o feso'ota'iga o galuega e puipuia ai le va'aiga o galuega
4. Transient voltage suppressor (SB360 3A 60V): E fa'alautele le umi o le ola o feso'ota'iga.
   1. Taofi le diode uta DC: Fa'aaoga pe a la'ititi le malosi (Ata 12a)
   2. Diode + Zener taofiofia o le uta DC: Fa'aoga pe a tele atu le malosi ma fa'aoso soo (Ata 12b)
5. Molī mumu (avega tetee)
6. AC sapalai eletise
7. Fa'atino fa'apitoa fa'alelima: Mo fa'ata'ita'igaample, Y3 ma le Y4 pulea le tamoe agai i luma ma toe faafeagai le tamoʻe o le afi, faia se interlock mo le matagaluega fafo, faatasi ai ma le PLC polokalame i totonu, ina ia mautinoa le puipuiga malu i le tulaga o so o se mea sese e leʻi mafaufauina.
8. Absorber: Fa'aitiitia le fa'alavelave ile uta AC (Ata 13)

 Transistor (T).

1. DC sapalai eletise
2. Taofi fa'afuase'i
3. Fuse puipuiga o le li'o
4. TVS diode: Fa'aumi le tumau o feso'ota'iga mo le tele o le ola tautua.
   1. Taofi le diode: Fa'aaoga pe a la'ititi le malosi (Ata 15a)
   2. Diode + Zener taofiofia: Fa'aaoga pe a tele le malosi ma fa'aoso soo (Ata 15b)
5. Fa'atino fa'apitoa fa'alelima: Mo fa'ata'ita'igaample, Y3 ma le Y4 pulea le tamoe agai i luma ma toe faafeagai le tamoʻe o le afi, faia se interlock mo le matagaluega fafo, faatasi ai ma le PLC polokalame i totonu, ina ia mautinoa le puipuiga malu i le tulaga o so o se mea sese e leʻi mafaufauina.

A/D ma le D/A Uaea Fafo

1. Matai node
2. Node pologa
3. Tete'e fa'amau
4. Uaea talipupuni

Fa'aaliga:

1. O lo'o fa'atonuina le fa'afeso'ota'i o fa'ato'aga fa'ato'aga i le matai ma le pologa mulimuli ma le tau fa'atetee o le 120Ω.
2. Ina ia mautinoa le lelei o feso'ota'iga, fa'amolemole fa'aoga uaea fa'alua fa'alua fa'afefeteina (20AWG) mo uaea.
3. Ina ua voltage pa'ū tupu i le va o fa'asinomaga eleele i totonu o faiga e lua, fa'afeso'ota'i faiga ma le Signal Ground point (SG) mo le ausiaina tutusa i le va o faiga ina ia mafai ona maua se feso'ota'iga mautu.

Sa'o ole RTC (Lua/Masina)

Vevela(°C/°F)	0/32	25/77	55/131
Tele mea sese (Lua)	-117	52	-132

Le umi e fa'amauina ai le RTC: Tasi le vaiaso (Na'o le version 2.00 ma luga atu e lagolagoina.)

Pepa / Punaoa

DELTA DVP-SX2 Polokalama Logic Pule [pdf] Faatonuga DVP-SX2, DVP-SX2 Polokalama Pule Fa'atonu, Polokalama Fa'atonu Fa'atonu, Fa'atonu Fa'atonu, Fa'atonu.

Fa'asinomaga

• Tusi Taiala