DVP-SX2
Iwe itọnisọna
DVP-SX2 Programmerable kannaa Controllers
O ṣeun fun yiyan Delta DVP-SX2. DVP-SX2 jẹ aaye 20-ojuami (8DI + 6 DO + 4AI + 2AO) PLC MPU, nfunni ni ọpọlọpọ awọn ilana ati pe o wa pẹlu iranti eto awọn igbesẹ 16k, ni anfani lati sopọ pẹlu gbogbo awọn awoṣe itẹsiwaju Slim jara, pẹlu titẹ sii / igbejade oni nọmba (max. 480 input / o wu ojuami itẹsiwaju), afọwọṣe modulu (A / D, D / A transformation ati otutu sipo) ati gbogbo iru awọn titun ga-iyara itẹsiwaju modulu. Iyara giga-giga 2-ẹgbẹ rẹ (100kHz) awọn abajade pulse ati awọn itọnisọna interpolation 2-axis tuntun kan
ni itẹlọrun gbogbo iru awọn ohun elo. DVP-SX2 jẹ kekere ni iwọn, ati pe o le fi sori ẹrọ ni irọrun.
Awọn olumulo ko ni lati fi sori ẹrọ eyikeyi batiri ni DVP-SX2 jara PLCs. Awọn eto PLC ati data latched ti wa ni ipamọ ni awọn iranti filasi iyara-giga.
DVP-SX2 jẹ ẹya OPEN-TYPE ẹrọ. O yẹ ki o fi sori ẹrọ ni minisita iṣakoso laisi eruku afẹfẹ, ọriniinitutu, mọnamọna ati gbigbọn. Lati yago fun awọn oṣiṣẹ ti kii ṣe itọju lati ṣiṣẹ DVP-SX2, tabi lati yago fun ijamba lati ba DVP-SX2 jẹ, minisita iṣakoso ninu eyiti a ti fi DVP-SX2 sori ẹrọ yẹ ki o ni ipese pẹlu aabo. Fun example, minisita iṣakoso ninu eyiti DVP-SX2 ti fi sori ẹrọ le jẹ ṣiṣi silẹ pẹlu ọpa pataki tabi bọtini.
MAA ṢE so agbara AC pọ mọ eyikeyi awọn ebute I/O, bibẹẹkọ ibajẹ nla le waye. Jọwọ ṣayẹwo gbogbo awọn onirin lẹẹkansi ṣaaju ki DVP-SX2 to ni agbara. Lẹhin ti DVP-SX2 ti ge asopọ, MAA ṢE fi ọwọ kan awọn ebute ni iṣẹju kan. Rii daju wipe ebute oko 
lori DVP-SX2 ti wa ni titọ ilẹ ni ibere lati se itanna kikọlu.
Ọja Profile
Itanna pato
| Ohun elo awoṣe | DVP20SX211R | DVP20SX211T | DVP20SX211S |
| Ipese agbara voltage | 24VDC (-15% ~ 20%) (pẹlu counter-asopọ Idaabobo lori polarity ti DC input agbara) DVPPS01 (PS02): input 100-240VAC, o wu 24VDC/1A (PS02: 2A) | ||
| Inrush lọwọlọwọ | O pọju. 7.5A @ 24VDC | ||
| Agbara fiusi | 2.5A / 30VDC, Poly yipada | ||
| Lilo agbara | 4.7W | 4W | 4W |
| Idaabobo idabobo | > 5MΩ (gbogbo aaye I/O-si-ilẹ: 500VDC) | ||
| Ajesara ariwo | ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Laini agbara: 2kV, Digital I/O: 1kV, Analog & Communication I/ O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m Surge(IEC 61131-2, IEC 61000-4-5): Okun agbara DC: ipo iyatọ ± 0.5 kV afọwọṣe I / O, RS-232, USB (idabobo): Ipo ti o wọpọ ± 1 kV digital I / O, RS-485 (aiṣedeede): Ipo wọpọ ± 1 kV |
||
| Ilẹ-ilẹ | Iwọn ila opin ti waya ilẹ ko le jẹ kere ju iwọn ila opin waya ti awọn ebute 24V ati 0V (Gbogbo awọn ẹya DVP yẹ ki o wa ni ilẹ taara si ọpa ilẹ). | ||
| Isẹ / ipamọ | Isẹ: 0°C ~ 55°C (iwọn otutu), 50 ~ 95% (ọriniinitutu), Idoti degree2 Ibi ipamọ: -25°C ~ 70°C (iwọn otutu), 5 ~ 95% (ọriniinitutu) | ||
| Gbigbọn / mọnamọna resistance | Awọn ajohunše agbaye: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (idanwo Ea) | ||
| Ìwúwo (g) | 243g | 224g | 227g |
| Spec. Awọn nkan | Ojuami igbewọle | |||
| 24VDC (-15% ~ 20%) igbewọle ibudo ọkan ti o wọpọ | ||||
| Nọmba titẹ sii. | X0, X2 | X1, X3 | X4 ~ X7 | |
| Iru igbewọle | DC (SINK tabi ORISUN) | |||
| Iṣawọle lọwọlọwọ (± 10%) | 24VDC, 5mA | |||
| Input impedance | 4.7k oh | |||
| Ipele igbese | Paa ⭢ Lori | > 15VDC | ||
| Titan ⭢ Paa | <5VDC | |||
| Akoko idahun | Paa ⭢ Lori | <2.5μs | <10μs | <20 wa |
| Titan ⭢ Paa | <5μs | <20μs | <50 wa | |
| Àlẹmọ akoko | Atunṣe laarin 0 ~ 20ms nipasẹ D1020 (Ayipada: 10ms) | |||
| Pato. | Ojuami Ijade | ||||
| Awọn nkan | Yiyi | Transistor | |||
| Ijade No. | Y0 ~ Y5 | Y0, Y2 | Y1, Y3 | Y4, Y5 | |
| O pọju. igbohunsafẹfẹ | 1Hz | 100kHz | 10kHz | 1kHz | |
| Ṣiṣẹ voltage | 250VAC, <30VDC | 5 ~ 30VDC #1 | |||
| O pọju. fifuye | Atako | 1.5A/1 ojuami (5A/COM) | SX211T: 0.5A/1 ojuami (3A/ZP) SX211S: 0.3A/1 ojuami (1.8A/UP) | ||
| Atinuda | #2 | 15W (30VDC) | |||
| Lamp | 20WDC/100WAC | 2.5W (30VDC) | |||
| Akoko idahun | Paa ⭢ Lori | Isunmọ. 10 ms | 2μs | 20μs | 100μs |
| Titan ⭢ Paa | 3μs | 30μs | 100μs | ||
# 1: DVP20SX211T: UP, ZP gbọdọ ṣiṣẹ pẹlu ita iranlọwọ ipese agbara 24VDC (-15% ~ +20%), won won agbara isunmọ. 3mA/ojuami.
DVP20SX211S: UP, ZP gbọdọ ṣiṣẹ pẹlu ita iranlọwọ ipese agbara 5 ~ 30VDC, won won agbara isunmọ. 5mA/ojuami.
A/D ati D/A ni pato
| Awọn nkan | Iṣagbewọle Analog (A/D) | Ijade Analog (D/A) | ||||
| Voltage | Lọwọlọwọ | Voltage | Lọwọlọwọ | |||
| Analog I/O ibiti | ± 10V | ± 20mA | 4 ~ 20mA#1 | ± 10V | 0 ~ 20mA | 4 ~ 20mA#1 |
| Digital iyipada ibiti o | ±2,000 | ±2,000 | 0 ~ +2,000 | ±2,000 | 0 ~ +4,000 | 0 ~ +4,000 |
| Ipinnu #2 | 12-bit | |||||
| Input impedance | > 1MΩ | 250Ω | – | |||
| Ifarada ti gbe ikọlu | – | ≥ 5KΩ | Ω 500Ω | |||
| Ìwò išedede | Iṣe deede ti kii ṣe laini: ± 1% ti iwọn kikun laarin iwọn iwọn otutu iṣẹ PLC Iyapa ti o pọju: ± 1% ti iwọn kikun ni 20mA ati + 10V | |||||
| Akoko idahun | 2ms (ti a ṣeto ni D1118) #3 | 2ms #4 | ||||
| Iwọn titẹ sii pipe | ± 15V | ± 32mA | – | |||
| Digital data kika | 2 ká àṣekún ti 16-bit, 12 significant die-die | |||||
| Išẹ apapọ | Ti pese (ti a ṣeto ni D1062) #5 | – | ||||
| Ọna ipinya | Ko si Iyapa laarin oni Circuit ati afọwọṣe Circuit | |||||
| Idaabobo | Voltage wu ni o ni kukuru Circuit Idaabobo, ṣugbọn a gun akoko ti kukuru Circuit le fa ti abẹnu waya bibajẹ ati ìmọ Circuit ti isiyi o wu. | |||||
# 1: Jọwọ tọka si alaye alaye ti D1115.
# 2: agbekalẹ ipinnu
| Iṣagbewọle Analog (A/D) | Ijade Analog (D/A) | ||
| Voltage | Lọwọlọwọ | Voltage | Lọwọlọwọ |
| (5mV = 20V) 4000 |
(10μΑ = 40mA) 4000 |
(5mV = 20V) 4000 |
(5μΑ = 20mA) 4000 |
# 3: Nigbati akoko ọlọjẹ ba gun ju 2ms tabi iye ṣeto, eto naa yoo tẹle akoko ọlọjẹ naa.
# 4: Nigbati akoko ọlọjẹ ba gun ju 2ms, eto naa yoo tẹle akoko ọlọjẹ naa.
#5: Nigbati awọn sampling ibiti o ti wa ni "1", awọn bayi iye yoo wa ni ka.
Iṣeto I/O
| Awoṣe | Iṣawọle | Abajade | I / O iṣeto ni | ||||
| Ojuami | Iru | Ojuami | Iru | Yiyi | NPN | PNP | |
| 20SX211R | 8 | DC (Sink Tabi Orisun) | 6 | Yiyi |  |
 |
 |
| 20SX211T | NPN Transistor | ||||||
| 20SX211S | PNP Transistor | ||||||
| SX2-R/T/S | 4 | Afọwọṣe Analog | 2 | Afọwọṣe jade | |||
Iwọn & Fifi sori ẹrọ
Jọwọ fi PLC sori ẹrọ ni apade pẹlu aaye to ni ayika rẹ lati gba itusilẹ ooru laaye, bi o ṣe han ninu [Aworan 5].
- Iṣagbesori taara: Jọwọ lo skru M4 ni ibamu si iwọn ti ọja naa.
- DIN Rail Iṣagbesori: Nigbati o ba n gbe PLC si 35mm DIN iṣinipopada, rii daju pe o lo agekuru idaduro lati da eyikeyi iṣipopada ẹgbẹ-si-ẹgbẹ ti PLC ati dinku anfani ti awọn okun ni alaimuṣinṣin. Agekuru idaduro wa ni isalẹ ti PLC. Lati ni aabo PLC si
DIN iṣinipopada, fa agekuru naa silẹ, gbe e sori iṣinipopada ki o rọra gbe soke. Lati yọ PLC kuro, fa agekuru idaduro si isalẹ pẹlu screwdriver alapin ki o si rọra yọ PLC kuro lati DIN iṣinipopada.
Asopọmọra
- Lo 26-16AWG (0.4 ~ 1.2mm) ẹyọkan tabi ọpọ okun waya lori awọn ebute onirin I/O. Wo nọmba ni apa ọtun fun sipesifikesonu rẹ. Awọn skru ebute PLC yẹ ki o wa ni wiwọ si 2.0 kg-cm (1.77 in-lbs) ati jọwọ lo adari bàbà 60/75ºC nikan.
- MAA ṢE waya ebute sofo ki o gbe okun ifihan I/O sinu iyika onirin kanna.
- MAA ṢE ju adaorin onirin kekere silẹ sinu PLC lakoko ti o n yi ati wiwọ. Ya si pa awọn sitika lori ooru wọbia iho fun a se ajeeji oludoti lati ju sinu, lati rii daju deede ooru wọbia ti awọn PLC.
Ailewu Wiring
Niwọn igba ti DVP-SX2 jẹ ibaramu nikan pẹlu ipese agbara DC, awọn modulu ipese agbara Delta (DVPPS01/DVPPS02) jẹ awọn ipese agbara to dara fun DVP-SX2. A daba awọn olumulo lati fi sori ẹrọ Circuit Idaabobo ni ebute ipese agbara lati daabobo DVPPS01 tabi DVPPS02. Wo aworan ni isalẹ.
- Ipese agbara AC: 100 ~ 240VAC, 50/60Hz
- Fifọ
- Iduro pajawiri: Bọtini yi ge ipese agbara eto nigbati pajawiri lairotẹlẹ ba waye.
- Atọka agbara
- AC ipese agbara fifuye
- Fiusi Idaabobo Circuit ipese agbara (2A)
- DVPPS01/DVPPS02
- Ipese ipese agbara DC: 24VDC, 500mA
- DVP-PLC (Ẹka iṣiṣẹ akọkọ)
- Digital Mo / O module
Ibi ti ina elekitiriki ti nwa
Iṣagbewọle agbara ti DVP-SX2 jara jẹ DC. Nigbati o ba n ṣiṣẹ DVP-SX2 jara, jọwọ ṣakiyesi awọn aaye wọnyi:
- Agbara naa ni asopọ si awọn ebute meji, 24VDC ati 0V, ati iwọn agbara jẹ 20.4 ~ 28.8VDC. Ti agbara voltage kere ju 20.4VDC, PLC yoo da ṣiṣiṣẹ duro, gbogbo awọn abajade yoo lọ “Paa” ati Atọka ERROR yoo filasi nigbagbogbo.
- Tiipa agbara ti o kere ju 10 ms kii yoo ni ipa lori iṣẹ ti PLC. Sibẹsibẹ, akoko tiipa agbara ti o gun ju tabi ju ti agbara voltage yoo da iṣẹ ti PLC duro ati pe gbogbo awọn abajade yoo lọ PA. Nigbati agbara ba pada si ipo deede, PLC yoo bẹrẹ iṣẹ laifọwọyi. (Itọju yẹ ki o wa ni ya lori awọn latched oluranlowo relays ati forukọsilẹ inu awọn PLC nigba ti siseto).
Input Point Wiring
Awọn oriṣi meji ti awọn igbewọle DC wa, SINK ati SOURCE. (Wo example isalẹ. Fun atunto aaye alaye, jọwọ tọka si sipesifikesonu ti awoṣe kọọkan.)
O wu Point Wiring
- DVP-SX2 jara ni meta o wu modulu, yii ati transistor (NPN/PNP). Jẹ mọ ti awọn asopọ ti pín ebute nigba ti onirin o wu ebute.
- Awọn ebute ti njade, Y0, Y1, ati Y2, ti awọn awoṣe yiyi lo C0 ibudo wọpọ; Y3, Y4, ati Y5 lo C1 ibudo wọpọ; bi o ṣe han ninu [Aworan 9]. Nigbati awọn aaye iṣẹjade ba ti ṣiṣẹ, awọn afihan ibaramu wọn lori iwaju iwaju yoo wa ni titan.
- Awọn ebute iṣelọpọ Y0 ~ Y5 ti awoṣe transistor (NPN) ti sopọ si awọn ebute to wọpọ UP ati ZP. Wo [Aworan 10a]. Awọn ebute iṣelọpọ Y0 ~ Y5 lori awoṣe transistor (PNP) ti sopọ si awọn ebute to wọpọ UP ati ZP. Wo [Aworan 10b].
- Circuit ipinya: Awọn opitika coupler ti lo lati ya sọtọ awọn ifihan agbara laarin awọn Circuit inu PLC ati input modulu.
Yiyi (R) o wu Circuit onirin
- DC ipese agbara
- Iduro pajawiri: Nlo iyipada ita
- Fuse: Nlo fiusi 5 ~ 10A ni ebute pinpin ti awọn olubasọrọ ti o wu lati daabobo iyika o wu
- Voltage suppressor (SB360 3A 60V): Lati fa awọn aye igba ti olubasọrọ.
1. Diode diode ti fifuye DC: Ti a lo nigbati o wa ni agbara kekere (Figure 12a)
2. Diode + Zener titẹkuro ti fifuye DC: Ti a lo nigbati o wa ni agbara nla ati titan / Paa loorekoore (Aworan 12b) - Ina Ohu (ẹrù atako)
- AC ipese agbara
- Iṣẹjade iyasoto pẹlu ọwọ: Fun example, Y3 ati Y4 šakoso awọn siwaju yen ati yiyipada ti awọn motor, lara ohun interlock fun awọn ita Circuit, pọ pẹlu awọn PLC ti abẹnu eto, lati rii daju aabo aabo ni irú ti eyikeyi airotẹlẹ aṣiṣe.
- Absorber: Lati dinku kikọlu lori fifuye AC (Aworan 13)
Transistor (T) o wu Circuit onirin
- DC ipese agbara
- Iduro pajawiri
- Circuit Idaabobo fiusi
- diode TVS: Ṣe gigun awọn olubasọrọ 'itọju fun igbesi aye iṣẹ nla.
1. Diode diode: Ti a lo nigbati o wa ni agbara kekere (Aworan 15a)
2. Diode + Zener titẹkuro: Ti a lo nigbati o ba wa ni agbara nla ati Titan/Pa loorekoore (Aworan 15b) - Iṣẹjade iyasoto pẹlu ọwọ: Fun example, Y3 ati Y4 šakoso awọn siwaju yen ati yiyipada ti awọn motor, lara ohun interlock fun awọn ita Circuit, pọ pẹlu awọn PLC ti abẹnu eto, lati rii daju aabo aabo ni irú ti eyikeyi airotẹlẹ aṣiṣe.
A / D ati D / A Ita Wiring
- Titunto ipade
- Ẹrú ipade
- resistor ebute
- Dabobo USB
Akiyesi:
- Awọn resistors ebute ni a daba lati sopọ si oluwa ati ẹru ti o kẹhin pẹlu iye resistor ti 120Ω.
- Lati rii daju didara ibaraẹnisọrọ, jọwọ lo okun alayidi idabobo meji (20AWG) fun onirin.
- Nigbati voltage silẹ waye laarin awọn itọkasi ilẹ ti inu ti awọn ọna ṣiṣe meji, so awọn ọna ṣiṣe pẹlu aaye Ilẹ Signal (SG) fun iyọrisi agbara dogba laarin awọn eto ki ibaraẹnisọrọ iduroṣinṣin le gba.
Itọkasi ti RTC (Ikeji/Oṣu)
| Òtútù(°C/°F) | 0/32 | 25/77 | 55/131 |
| Aṣiṣe ti o pọju (keji) | -117 | 52 | -132 |
Iye akoko ninu eyiti RTC ti wa ni idaduro: Ọsẹ kan (Ẹya 2.00 ati loke nikan ni atilẹyin.)
Awọn iwe aṣẹ / Awọn orisun
 |
DELTA DVP-SX2 Programmerable Logic Controllers [pdf] Awọn ilana DVP-SX2, DVP-SX2 Awọn alabojuto Logic Programmable, Awọn alabojuto Iṣatunṣe Eto, Awọn oluṣakoso Logic, Awọn oludari |