Size Rf2 4g Wireless 75w Push-dim LED Controller
User Manual
RF Push Single Color LED Mini Controller
Model No.: V1-N
1 channel constant voltage/Push-Dim/Max 75W/Step-less dimming/Wireless remote control
Features
- 1 channel constant voltage single color LED mini RF controller.
- 3A per channel, output connect with 5 meters single color LED strip, max output power 75W.
- Connect with push switch to achieve on/off and 0-100% dimming function.
- Match with RF 2.4G single zone or multiple zone dimming remote control optionally.
- One RF controller accept up to 10 remote control.
- 4096 levels 0-100% dimming smoothly without any ash.
- Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
- Synchronize on multiple number of controllers.
Technical Parameters
| Input and Output | Dimming data | Safety and EMC | |||
| Input voltage | 12-24VDC | Input signal | RF 2.4GHz | EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 |
| Output voltage | 12-24VDC | Control distance | 30m(Banierfree space) | ||
| Output power | Max. 75W | Dimming gray scale | 409612^121 levels | Safety standard(LVD) | EN 62368-1:2020+A11:202C |
| Output type | Constant voltage | Dimming range | 0 -100% | RadioEquipment(RED) | ETSI EN 300 328 V2.2.2 |
| Environment 1 | Dimming curve | Logarithmic | Certification | CE,EMC,LVD,RED | |
| Operation temperature | To: -30°C – +55°C | PWM Frequency | 500Hz (default) | Package L ala | |
| Case temperature (Max.) | To: +85°C | Warranty | 5 years | Size | 190x H 130mm |
| 4 | 4. | Gross weight a | 0.013kg | ||
Dimension
Wiring Diagram
Push Dim function:
| Click | ON/OFF |
| Double Click | Turn on at 100% or 10% (night light) and vice-versa |
| Long press(>1s) from OFF | Dimming UP/DOWN |
| Long press(>1s) from ON | Dimming UP/DOWN |
Match Remote Control
Match:
Switch off the power, then switch on power.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Another way to match:
The receiver is power on for five consecutive times, the LED strip light start blinking slowly for 10s, Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The light blinks 3 times means match is successful.
Dimming Curve
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
| No light | 1. No power. 2. Wrong connection or insecure. |
1. Check the power. 2. Check the connection. |
| Malfunctions No light | 1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote. |
1. Replace battery. 2. Reduce remote distance. 3. Re-match the remote. |
Installation Precautions
- The products shall not be stacked, the distance should be ≥ 20cm, so as not to affect lifespan of the products due to poor heat dissipation.
- The product shall not be installed close to the switching power supply with an interval of ≥ 20cm to avoid the radiation interference of the switching power supply.
- The installation height shall be ≥ 1m from the oor to avoid shortening the remote control distance due to too weak reception signal.
- The products are not allowed to be close to or covered by metal objects, with an interval of ≥ 20cm to avoid signal attenuation and shorten the remote control distance.
- Avoid installation at the corner of the wall or the corner of the beam, with an interval of ≥ 20cm to avoid signal interference.
Documents / Resources
 |
SKYDANCE V1-N Mini Size Rf2.4g Wireless 75w Push-dim LED Controller [pdf] User Manual V1-N, Mini Size Rf2.4g Wireless 75w Push-dim LED Controller, Wireless 75w Push-dim LED Controller, Mini Size Rf2.4g LED Controller, LED Controller, Controller |
