SKYDANCE V3-M Rgb Mini Led Controller

 

RGB LED Mini RF Controller Model No.: V3-M, V3-M(CJ), V3-M(DJ)
3 channel constant voltage/Max 6A output/Step-less dimming/Wireless remote control

V3-M Cable In /Cable Out Version	V3-M(CJ DC Female Jack In /4P Female Jack Out Version	V3-M(DJ) DC Female Jack In /4P Female Jack Out Version

Model List

Model	Photo	Power Connector	LED Connector
V3-M		Red/Black Cable 10cm	4-color Flat Cable 10cm
V3-M(CJ)		Red/Black Cable 10cm	4-pin Flat Female Jack 10cm
V3-M(DJ)		5.5mm DC Female Jack	4-pin Flat Female Jack 10cm

Features

• 3 channel constant voltage RGB LED mini RF controller.
• 2A per channel, output connect with 5 meters RGB LED strip.
• Match with RF 2.4G single zone or multiple zone RGB/RGBW remote control.
• One RF controller accept up to 10 remote control.
• 4096 levels 0-100% dimming smoothly without any flash.
• Built in 10 dynamic mode, include jump or gradual change style.
• Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
• Synchronize on multiple number of controllers.

Dimension

Technical Parameters

Input and Output
Input voltage		12-24VDC
Output voltage		12-24VDC
Output current		2A/CH, Total Max. 6A
Output type		Constant voltage
Environment
Operation temperature		Ta: -30 OC ~ +55 OC
Case temperature (Max.)		T c: +85OC
IP rating		IP20
Warranty and Protection
Warranty		5 years
Protection		Reverse polarity Over heat
Dimming data
Input signal	RF 2.4GHz
Control distance	30m(Barrier-free space)
Dimming gray scale	4096 (2^12) levels
Dimming range	0 -100%
Dimming curve	Logarithmic
PWM Frequency	500Hz (default)
Safety and EMC
EMC standard (EMC	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)	EN 62368-1:2020+A11:2020
Radio Equipment(RED)	ETSI EN 300 328 V2.2.2
Certification	CE,EMC,LVD,RED

Wiring Diagram

 

RGB dynamic mode list

1. RGB jump
   
2. RGB smooth
   
3. 6 color jump
   
4. 6 color smooth
   
5. Yellow cyan purple smooth
   
6. RGB fade in and out
   
7. Red fade in and out
   
8. Green fade in and out
   
9. Blue fade in and out
   
10. White fade in and out
    

Dimming curve

Application notes

1. All the receivers in the same zone
   Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be limitless.
   Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed.
   Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
   Strong signal sources such as WiFi routers and microwave ovens will affect the range.
   We recommend for indoor applications that receiver placements should be no further apart than15m.
2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
   
   

Malfunctions analysis & troubleshooting

Malfunctions	Causes	Troubleshooting
No light	No power. Wrong connection or insecure.	Check the power Check the connection.
Wrong color	Wrong connection of R/G/B wires.	Reconnect R/G/B wires.
No response from the remote	The battery has no power. Beyond controllable distance. The controller did not match the remote.	Replace battery. Reduce remote distance. Re-match the remote.

Documents / Resources

SKYDANCE V3-M Rgb Mini Led Controller [pdf] Owner's Manual V3-M Rgb Mini Led Controller, V3-M, Rgb Mini Led Controller, Mini Led Controller, Led Controller

References

• User Manual