SILVER MONKEY UT-400 Mount User Manual

SILVER MONKEY UT-400 Mount

PARTS INCLUDED

Safety information

• Adjust the mount with the installed device only.
• Make sure that the weight of the device does not exceed the weight defined in the specification.
• Check that the screws are tightly fastened.
• The wall must be able to sustain the device on the bracket according to its allowable load.
• Proper tools and at least two people are required for safe installation.
• Mounting requires extreme caution. If the bracket with the device falls, it can cause injury, permanent damage to health or even death.
• Keep the device out of the reach of children. They may swallow some parts.
• Use the device only in accordance with the operating instructions.
• If the device stops working properly – contact us.

INSTALLATION INSTRUCTIONS

Specification

TV Wall Mount

• TV size 13” – 42”
• VESA compatibility 75×75, 100×100, 200×100, 200×200
• Maximum load 20 kg
• Rotation range +90° ~-90°
• Distance from the wall 60 – 364 mm

Warranty and technical support

Your product is covered by a 24-month manufacturer’s warranty. For more information go to www.silvermonkey.com/support. If you have questions about using the product – contact us at kontakt@silvermonkey.com. Manufacturer: Silver Monkey sp. z o.o., ul. Twarda 18, 00-105 Warszawa, Poland.