SIFENE 3101 Efficient Masticating Juicers User Guide

High Yield Fruit&Veges

• Apples
  
• Oranges
  
• Pears
  
• Carrots
  
• Celery
  
• Cucumber
  
• Wheat grass
  

What’s included

1. Main Body
2. Operation Panel:REV, STOP, SOFT, HARD
3. Unlock Button
4. Juice Cup
5. Pulp Cup
6. Pusher
7. Juice Container
8. Auger
9. Fine Strainer
10. Juicing Body Cover

How to Assemble

Step 1

Connecting juicer:

1. Align feed chute with “unlock mark.”
2. Turn counterclockwise until click.
   

Step 2

Align auger shaft with motor shaft, push to bottom. (Adjust by turning auger if misaligned.).

Step 3

Insert fine strainer’s large hole at screw propeller’s tail, push positioning ribs into juicer’s notch.

Step 4

Align three buckles on cover and body, push in, rotate counterclockwise to tighten cover and body.

Step 5

Place the juice cup next to the fuselage, and place the pomace cup under the slag outlet of the juice extractor.

How to Use

REV button: When the slag discharge is not smooth or clogged the key is used.
STOP button: Motor stops working.
SOFT button: Low-speed working button(suitable for picking soft fruits and vegetables such as tomatoes, watermelons, and grapes);
HARD button: High-speed working button (svitable for extracting hard fruits and vegetables such as carrots, and apple pears).

Tips to avoid clogging in juicers

1. Cut the ingredients into 1″ – 1.5″ small pieces before juicing.
2. Feed the ingredients into the juicer gradually.
3. Ensure the pusher is firmly in place when feeding produce into the juicer.

CONTACT US!
Email: support@sifene.com
Web: https://sifene.com/

Documents / Resources

SIFENE 3101 Efficient Masticating Juicers [pdf] User Guide 3101 Efficient Masticating Juicers, 3101, Efficient Masticating Juicers, Masticating Juicers, Juicers

References

• User Manual