SIDOC Wireless Bluetooth Headset User Manual

Instruction

WIRELESS HEADPHONE

VOL + : Rotate clockwise
VOL – : Rotate counterclockwise
Previous track : Click three times
Next track : Click twice
Play/Pause: Click once
Enter into voice assistant : Press & hold 1.5s
Switch between Chinese & English voice prompts: Click four times

Power ON/OFF: Press& hold 3s
Answer /hang up the call: Click once
Reject incoming call: Press & hold 2s
Turn on/off LCD: Click four times
BT/TF mode : Click twice
Game mode : When BT mode, Click three times

When various modes are activated, the corresponding icons on the digital display screen will flash slowly.

Wireless technology

With wireless technology, you can connect your headphone to a compatible communication device without using a cable.The wireless connection does not need to keep the phone and the headphone facing each other, but the maximum distance between the two should not exceed 10meters (about 30 feet), and the wireless connection may be disturbed by obstacles such as walls or other electronic.

Pairing name:BT

After successfully connecting the headset, tap the “Settings” on your mobile phone and turn on the device volume synchronization.

Specifications

Version: 5.4
Transmission range: 10M
Frequency range: 20Hz-20kHz
Speaker:40mm
Impedance: 32Ω
Charging time:about 2H
Input:DC5V

Accessories

Contents: Headphone*1,Type-C charging cable*1, user manual *1

Warm prompt of headphone charging

If the headphone is not used for a long time, in order to extend the battery life, it isrecommened to fully charge the headphone every month.