BS001 Bluetooth Speaker
Product Information
Specifications
- Power: DC 5V 2A
- Bluetooth Range: 30ft
- Charging Time: 24 hours for initial charge
- Package Contents: Speaker, User Manual, USB Charging cable
Product Usage Instructions
Charging the Speaker
- Plug the USB charging cable into the charging socket of the
speaker. - Connect the other end of the USB charging cable to an
adapter. - The red LED indicator on the speaker will light up, indicating
charging. - Once fully charged, the red LED will turn off.
Pairing the Device
- Place the speaker within 30ft of the Bluetooth-enabled
device. - Slide the ON/OFF button to ON.
- The white LED will flash to indicate Bluetooth pairing
mode. - Follow your device’s instructions to search for the
speaker. - The white LED will stay on when pairing is complete.
Basic Instructions
- To turn the speaker on, press the ON/OFF button to ON.
- The white LED will flash slowly upon activation.
- The white LED will remain on when playing music.
- A low battery is indicated by beeping at 1-minute
intervals.
Safety Information
To ensure safety, do not disassemble the device. Avoid using the
product in aircraft or hospitals. Do not expose the device to
direct sunlight, heat, or flame. The device may become warm during
charging.
- Power On/Off: Toggle to turn the unit On/Off.
- Last Song: Press quickly for the last song.
- Volume Up/Down: Rotate the switch to adjust volume.
- Next Song: Press quickly for the next track.
- 3.5mm Audio Input (Line-in)
- Bluetooth/AUX: Press to switch Bluetooth status and stereo
state. Hold for Bluetooth free pairing. - LED Red/Blue
- Play/Pause: Press to pause or play when listening to
music. - DC 5V 2A
Frequently Asked Questions (FAQ)
Q: How long does it take to fully charge the speaker?
A: The initial charge requires at least 24 hours. The red LED
indicator will turn off once fully charged.
Q: How can I know when the speaker is in pairing mode?
A: The white LED will flash quickly to indicate Bluetooth
pairing mode.
Q: Can I use the speaker while it is charging?
A: It is recommended to charge the speaker fully before use.
However, using it while charging should not damage the device.
Features and Specifications
· Main Device Parameters · Output Power: 30W+ 20W · Frequency Response: 65Hz-20KHz · BT V5.0 · Driver: 4″*1+ 2″*2 · Power Supply: DC 5V 2A · Distortion: <0.5% · S/N: >65dB · Battery Capacity:7.4V 2200mAh · Battery Play Time: 2–2.5 hours · Battery Charging Time: 4–5hours · Product Size: L252*W152*H166mm · Product Weight: 2350g
Package Contents
1. Speaker 2. User Manual 3. USB Charging cable
Charging the Speaker
Before using the speaker for the first time charge it for at least 24 hours. 1. Plug the USB charging cable into the charging socket of the speaker. Plug the other end of the USB charging cable into an adapter. The red LED indicator on the speaker will light up and your speaker will start charging. 2. The red LED turns on to indicate that the unit is charging. 3. Once fully charged, the red LED turns off.
Pairing the Device
1. Place speaker within 30ft of the Bluetooth-enabled device. 2. Slide the ON/OFF button to ON. The white LED flashes 3 times slowly, then flashes quickly to indicate Bluetooth pairing mode. 3. Follow the instructions of your device to search for the speaker. 4. The white LED flashes when pairing is complete.
Basic instructions
1. To turn the speaker on, press the ON/OFF button to ON. 2. The speaker beeps and a white LED flashes slowly. 3. The white LED stays on when playing music. 4. When the battery is low, the machine beeps “beep” at intervals of 1 minutes 5. LED indicator (1). Charging: Red LED on (the speaker off) (2). Fully Charged: Red LED off (3). Pairing Mode: White LED flashes quickly (4). Connected: White LED on (5). Playing: White LED flashes slowly
Safety information
To reduce the risk of electric shock, do not attempt to disassemble the device. Do not use this product in an aircraft or in a hospital. DCoanuotitoenxpose the device to direct sunlight, heat or flame. The device may become warm while charging
· Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. · This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Speaker button functions
6
7
8
ON
VOLOFF
VOL+
VOLUME
AUX
1
2
3
4
5
9
1. Power On/Off Toggle to turn the unit On/Off. 2. Last song: Press quickly for last song. 3. Volume up /down: Rotate the switch and adjust the volume 4. Next song: Press quickly for next track. 5. 3.5mm audio input (line-in) 6. Bluetooth / AUX Press the buttonSwitch Bluetooth status and stereo state Press and hold the buttonBluetooth free pairing 7. LED Red/Blue 8. Play/Pause When play in music, press the buttn to pause or play. 9. DC 5V 2A
FCC W arning 15.19 Labeling requirement s. This device complies w it h part 15 of t he FCC Rules. Operat ion is subject t o t he follow ing t w o condit ions: (1) This device may not cause harmful int erference, and (2) t his device must accept any int erference received, including int erference t hat may cause undesired operat ion . 15.21 Informat ion t o user. Any Changes or modificat ions not expressly approved by t he part y responsible for compliance could void t he user’s aut horit y t o operat e t he equipment . 15.105 Informat ion t o t he user. Not e: This equipment has been t est ed and found t o comply w it h t he limit s for a Class B digit al device, pursuant t o part 15 of t he FCC Rules. These limit s are designed t o provide reasonable prot ect ion against harmful int erference in a resident ial inst allat ion. This equipment generat es uses and can radiat e radio frequency energy and, if not inst alled and used in accordance w it h t he inst ruct ions, may cause harmful int erference t o radio communicat ions. How ever, t here is no guarant ee t hat int erference w ill not occur in a part icular inst allat ion. If t his equipment does cause harmful int erference t o radio or t elevision recept ion, w hich can be det ermined by t urning t he equipment off and on, t he user
is encouraged t o t ry t o correct t he int erference by one or more of t he follow ing measures : -Reorient or relocat e t he receiving ant enna. -Increase t he separat ion bet w een t he equipment and receiver. -Connect t he equipment int o an out let on a circuit different from t hat t o w hich t he receiver is connect ed. -Consult t he dealer or an experienced radio/ TV t echnician for help. FCC RF Radiat ion Exposure St at ement : 1. This Transmit t er must not be co-locat ed or operat ing in conjunct ion w it h any ot her ant enna or t ransmit t er. 2. This equipment complies w it h RF radiat ion exposure limit s set fort h for an uncont rolled envir onm ent . 3. This equipment should be inst alled and operat ed w it h minimum dist ance 5mm bet w een t he radiat or and your body.
Documents / Resources
 |
Shenzhen BS001 Bluetooth Speaker [pdf] User Manual 2BP82-BS001, 2BP82BS001, bs001, BS001 Bluetooth Speaker, BS001, Bluetooth Speaker, Speaker |