AZ4002 PowerDetect Upright Vacuum With TruePet Upgrade
“
Product Information
Specifications:
- Smart Detect Technology Suite
- FloorDetectTM
- DirtDetect
- EdgeDetect
Product Usage Instructions
1. Smart Detect Technology Suite:
The Smart Detect Technology Suite includes features such as
FloorDetect, DirtDetect, and EdgeDetect. These technologies work
together to optimize cleaning performance by identifying surface
types, dirty areas, and stubborn dirt, respectively.
2. Cleaning the Detect Sensors:
To ensure proper functionality of the Detect sensors, follow
these steps:
- Turn off the power and remove the floor nozzle.
- Locate the DirtDetect sensor in the nozzle, the FloorDetect
sensor on the bottom of the nozzle, and the EdgeDetect sensors on
both sides of the nozzle. - Gently wipe the sensors with a microfiber cloth to remove any
hair and debris. - Reattach the floor nozzle and turn on the power to verify
normal operation.
FAQ
Q: Why is the DirtDetect indicator sensor showing red?
A: The DirtDetect indicator sensor turns red to indicate that
cleaning is required. Follow the cleaning instructions provided in
the user manual to clean the DirtDetect sensor.
Q: How do I know if the Detect sensors are obstructed?
A: If the DirtDetect icon remains red after cleaning, it may
indicate that the sensors are partially obstructed. Ensure to clean
the sensors thoroughly to allow Detect mode to function
properly.
“`
SHARK® POWERDETECTTM
QUICK START GUIDE
SETTINGS
Touchscreen Selector: To switch between modes, gently tap the desired mode icon. · Detect Mode: Select Detect mode to activate Smart Detect Technology. In this mode,
the vacuum will detect floor type, dirt, and edges, and will automatically adjust suction to maximize cleaning performance. · Manual Surface Modes: Select one of the manual surface modes (Hard Floor, Carpet, or Thick Carpet) to clean specific surfaces without Smart Detect Technology.
SMART DETECT TECHNOLOGY SUITE
FLOORDETECTTM
Identifies surface type and adjusts brushroll speed and suction for optimized cleaning.
DIRTDETECT
Identifies dirty areas and automatically boosts suction power to pull in hidden dirt.
EDGEDETECT
Focuses and maximizes suction along corners and edges to target
stubborn dirt.
DETECT INDICATORS
DIRTDETECT INDICATOR
EDGEDETECT INDICATORS
LEFT EDGE
DIRTDETECT INDICATOR
CLEANING CLEANING
(WHITE)
BOOST EDGEDETECT INDICATORS
(PURPLE)
RIGHT EDGE
SENSOR CLEANING
Clean the sensors when the DIRTDETECT icon turns red. If the sensors are partially obstructed, Detect mode will not function as expected. If the icon is still red after cleaning, refer to Detect Sensor Maintenance in the Owner’s Guide.
CLEANING THE DETECT SENSORS
DIRTDETECT INDICATOR SENSORS REQUIRE CLEANING (RED)
CLEANING THE
CLEANING THE
CLEANING THE
DIRTDETECT SENSOR FLOORDETECT SENSOR EDGEDETECT SENSORS
TO CLEAN THE SENSORS:
1. Turn off power and remove the floor nozzle.
2. Locate the DirtDetect sensor in the nozzle (Fig. 1), the FloorDetect sensor on the bottom of the nozzle (Fig. 2), and the EdgeDetect sensors on both sides of the nozzle (Fig. 3).
3. Gently wipe the sensors with a microfiber cloth and remove all hair and debris.
4. Reattach the floor nozzle to the rest of the unit and turn on power. Verify the unit is functioning normally.
©2024 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. FLOORDETECT and POWERDETECT are trademarks of SharkNinja Operating LLC.
Documents / Resources
 |
Shark AZ4002 PowerDetect Upright Vacuum With TruePet Upgrade [pdf] User Guide AZ4002, AZ4002, AZ4002 PowerDetect Upright Vacuum With TruePet Upgrade, AZ4002, PowerDetect Upright Vacuum With TruePet Upgrade, Upright Vacuum With TruePet Upgrade, TruePet Upgrade, Upgrade |