SHAPER CS-SK-BG Connected Caliper
Specifications
- Model: Origin
- Dimensions: Not specified
- Weight: Not specified
- Manufacturer: Shape Tools
Product Usage Instructions
Getting Started
Before using the Origin, ensure that it is fully charged. Refer to the user manual for charging instructions.
Calibrating the Device
It is important to calibrate the Origin before use. Follow the step-by-step calibration guide provided in the user manual.
Using the Device
Once calibrated, you can start using the Origin to perform various tasks. Refer to the user manual for detailed instructions on operating the device.
Send precise measurements to Origin and other Bluetooth® devices with the push of a button.
Measuring accurately is essential to any successful project. With the Connected Caliper, sending precise measurements to Origin is simple and helps prevent unnecessary mistakes. Use them in the shop, on the job, or anywhere else you need to guarantee accurate measurements. Connect. Measure. Send.
- Range: 200 mm / 8in
- Compatibility: Bluetooth® enabled
- Accuracy: 001in
- Protection: Water and dust resistant
The Perfect Companion to Origin
By pressing the yellow button, the Connected Caliper will send your measurement to Origin – automatically populating the dimension, from cut depth to part geometry.
Pairs with other Bluetooth® devices
Use the Connected Caliper to send measurements to your computer or tablet running your favorite CAD tool or spreadsheet.
Depth Stop Included
Measuring pockets and slots is simple and accurate with the included depth stop accessory.
Large Multi-Unit Display Inch
Change units easily and switch from inches, to millimeters, or fraction
What’s in the box?
- Connected Caliper
- Protective case
- Depth stop
- Two Batteries
- Battery compartment tool
- Certificate of inspection
FAQs
Q: How do I charge the Origin?
A: To charge the Origin, connect the provided charger to the device and a power source. Allow it to charge fully before use.
Q: Can the Origin be used for woodworking projects?
A: Yes, the Origin is suitable for woodworking projects. Refer to the user manual for tips on using it effectively in woodworking.
Documents / Resources
 |
SHAPER CS-SK-BG Connected Caliper [pdf] User Guide CS-SK-BG Connected Caliper, CS-SK-BG, Connected Caliper, Caliper |
