Connecting Your Shaper Caliper
This guide explains how to connect your Shaper Caliper to Shaper Origin and computers.
[Tool Icon] ?
Installing the Battery
Using the included tool, open the battery compartment and insert the battery.
[Tool Icon] → [Battery Compartment]
Powering On
Turn on the Caliper when it is near your Shaper Origin or computer.
[Caliper Display Icon] → [Power Button]
Entering Pairing Mode
Press and hold the top button for 4 seconds until a flashing icon appears on the screen.
[Caliper Display Icon] → 4s [Flashing Icon]
Connection Options
Connection to Shaper Origin: Pages 06-09
Connection to Computer: Pages 10-11
For detailed help, visit: shapertools.com/calipers-help
[Shaper Origin Icon] ?
About Shaper Origin
Precise manual milling. Work with unparalleled precision, flexibility, and efficiency.
Learn more at: shapertools.com/origin
Shaper Origin System Updates
Turn on Origin and ensure the latest system update is running.
[Shaper Origin Machine Icon] ? [Power Cable]
Connecting Caliper to Origin
When prompted by Origin, connect the Caliper tool.
[Connection Prompt Icon]
Connecting Caliper to Computer
Via Bluetooth
Turn on Bluetooth®. Wait for Shaper Caliper to appear in the list of found devices, and tap 'Connect'.
[Toggle Switch] [Device List]
Caliper Interface and Controls
1. Main Button:
- 1️⃣ Press to turn on.
- 1️⃣ Press to zero measurement.
- 1️⃣ Press and hold (3 s) to turn off.
2. Unit/Mode Button:
- 2️⃣ Press to change display unit format.
3. Connection/Send Button:
- 3️⃣ Press and hold (4 s) to connect to device.
- 3️⃣ Press to send measurement to device.
- 3️⃣ Press and hold (4 s) to disconnect from device.
Bluetooth Status Icons
[No Signal Icon]: Bluetooth off.
[Flashing Signal Icon]: Ready to connect.
[Solid Signal Icon] ?: Connected to device.
Storage
The storage space under the depth stop is used for storing the tool and spare battery.
[Caliper in Case Icon] [Storage Compartment]
Shaper Tools
