SCT RCC-H030-1.0M RC-SDA+ Gen2 Adding Soft Codec Support to Camera
Product Information
| Product | Description |
|---|---|
| RC-SDA+ Gen2TM | A device used for adding soft codec support to camera/codec systems. It is available in two versions – with or without DSP (Digital Signal Processing). |
| RCC-H030-1.0M HDCI Y Cable to HDMI/DB9 | A cable that allows connection between HDCI (High Definition Camera Interface) and HDMI/DB9 interfaces. |
| Poly RPG300, RPG500, RPG700 & G7500 | Camera/codec systems offered by Poly. |
| RCC-M003-1.0M USB 3.0 A to A | A USB cable with Type-A connectors used for connecting devices. |
| Audio Mixer | A device used for mixing audio signals. |
| WPS-12 30VDC 100-240V 47-63Hz Power Supply | A power supply unit providing a voltage of 30VDC and compatible with input voltages ranging from 100V to 240V and frequencies between 47Hz and 63Hz. |
| PC Running Soft Codec | A personal computer running software-based codecs for audio and video processing. |
| HDMI Cable | A cable used for transmitting high-definition audio and video signals over HDMI interfaces. |
| Audio Cable | A cable used for transmitting audio signals. It needs to be purchased separately. |
| Audio DSP | An audio digital signal processor used for audio signal enhancement and processing. It is available only when adding soft codec support with DSP. |
Product Usage Instructions
Adding Soft Codec Support to Camera/Codec Systems (No DSP)
- Connect the RC-SDA+ Gen2TM device to the camera/codec system using the Poly-Supplied HDCI to Mini HDCI Cable.
- Connect the PC running soft codec to the RC-SDA+ Gen2TM device using the RCC-M003-1.0M USB 3.0 A to A cable.
- If required, connect an audio mixer to the RC-SDA+ Gen2TM device using audio cables purchased separately.
- Connect the power supply unit (WPS-12 30VDC 100-240V 47-63Hz) to the RC-SDA+ Gen2TM device.
- If necessary, connect an HDMI cable (purchased separately) to the camera/codec system.
- Set the soft codec to use software AEC (default mode).
Adding Soft Codec Support to Camera/Codec Systems (With DSP)
- Connect the RC-SDA+ Gen2TM device to the camera/codec system using the Poly-Supplied HDCI to Mini HDCI Cable.
- Connect the PC running soft codec to the RC-SDA+ Gen2TM device using the RCC-M003-1.0M USB 3.0 A to A cable.
- If required, connect an audio mixer to the RC-SDA+ Gen2TM device using audio cables purchased separately.
- Connect the audio digital signal processor (Audio DSP) to the RC-SDA+ Gen2TM device.
- Connect the power supply unit (WPS-12 30VDC 100-240V 47-63Hz) to the RC-SDA+ Gen2TM device.
- If necessary, connect an HDMI cable (purchased separately) to the camera/codec system.
- Set the soft codec to disable AEC:
- In MS Teams, select High Fidelity Music Mode and uncheck Enable echo cancellation.
- In Zoom, enable Original Sound and uncheck Echo Cancellation.
Adding Soft Codec Support to Poly Camera (No Codec, no DSP)
- Connect the RC-SDA+ Gen2TM device to the Poly camera using the Poly-Supplied HDCI to Mini HDCI Cable.
- Connect the PC running soft codec to the RC-SDA+ Gen2TM device using the RCC-M003-1.0M USB 3.0 A to A cable.
- If required, connect an audio amp to the RC-SDA+ Gen2TM device using audio cables purchased separately.
- Connect the power supply unit (WPS-12 30VDC 100-240V 47-63Hz) to the RC-SDA+ Gen2TM device.
- If necessary, connect an HDMI cable (purchased separately) to the Poly camera.
- Set the soft codec to use software AEC (default mode).
Adding Soft Codec Support to Poly Camera (No Codec, with DSP)
- Connect the RC-SDA+ Gen2TM device to the Poly camera using the Poly-Supplied HDCI to Mini HDCI Cable.
- Connect the PC running soft codec to the RC-SDA+ Gen2TM device using the RCC-M003-1.0M USB 3.0 A to A cable.
- If required, connect an audio amp to the RC-SDA+ Gen2TM device using audio cables purchased separately.
- Connect the audio digital signal processor (Audio DSP) to the RC-SDA+ Gen2TM device.
- Connect the power supply unit (WPS-12 30VDC 100-240V 47-63Hz) to the RC-SDA+ Gen2TM device.
- If necessary, connect an HDMI cable (purchased separately) to the Poly camera.
- Set the soft codec to disable AEC:
- In MS Teams, select High Fidelity Music Mode and uncheck Enable echo cancellation.
- In Zoom, enable Original Sound and uncheck Echo Cancellation.
RC-SDA+ Gen2™ Design Guide with Codec
Adding Soft Codec Support to Camera/Codec Systems (No DSP)
Adding Soft Codec Support to Camera/Codec Systems (With DSP)
Adding Soft Codec Support to Poly Camera (No Codec, no DSP)
Adding Soft Codec Support to Poly Camera (No Codec, with DSP)
Documents / Resources
 |
SCT RCC-H030-1.0M RC-SDA+ Gen2 Adding Soft Codec Support to Camera [pdf] User Guide RCC-H030-1.0M RC-SDA Gen2 Adding Soft Codec Support to Camera, RCC-H030-1.0M, RC-SDA Gen2 Adding Soft Codec Support to Camera, Gen2 Adding Soft Codec Support to Camera, Adding Soft Codec Support to Camera, Codec Support to Camera, Camera |
