SCANSTRUT SC-SL-01 Starlink Luminium Wedge Mount
Product Specifications
- Model: SC-SL-01 / SC-SL-01-BLK
- Part List Number: PT-004765
- Issue Date: 10-06-2024 (Issue 3)
Waterproof Cable Routing
Pass the smaller connector through the cable seal until the length is at least 600mm (23.6 inches). For routing multiple cables, add 1.5mm for each additional cable.
Recommended Starlink Cable Length
Ensure the cable length is greater than 600mm (23.6 inches).
Part List
Parts Required
Tools Required
Waterproof Cable Routing
- 1a Use the ø8.5mm bung supplied for routing the Starlink cable.
- 1b For routing a number of cables.
Recommended Starlink Cable Length
Pass smaller connector through the cable seal until the length is at least 600m (23.6”). 
Installation Instructions
IMPORTANT
- Wedge Mounts are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change without prior notice.
- Use of the Wedge Mounts with unapproved products, or overloading, invalidates any product warranty.
- Scanstrut does not supply fastenings to fix this product to the chosen surface. Please choose suitable fastenings for this purpose. No liability is accepted for damage caused by incorrect installation.
- The installation and assembly must be regularly inspected for evidence of damage or loose parts.
- Product has been designed specifically for the mounting of approved marine electronics under normal boating conditions.
UK & International
+44 (0)1392531280
sales@scanstrut.com
Scanstrut Ltd
Dart Business Park,
Clyst St. George, Exeter
EX3 0QH, UK
For further installation and warranty information please visit: www.scanstrut.com
FAQ
- Q: What tools are required for installation?
A: Depending on the option chosen (A or B), tools such as a power drill, spanner, and screwdrivers are needed. Refer to the installation instructions for a detailed list of tools. - Q: What is the recommended cable routing procedure?
A: Pass the smaller connector through the cable seal until the length is at least 600mm (23.6 inches) and add 1.5mm for each additional cable being routed.
Documents / Resources
 |
SCANSTRUT SC-SL-01 Starlink Luminium Wedge Mount [pdf] Installation Guide SC-SL-01, SC-SL-01-BLK, SC-SL-01 Starlink Luminium Wedge Mount, SC-SL-01, Starlink Luminium Wedge Mount, Luminium Wedge Mount, Wedge Mount |
