Mounts, Waterproof Wireless Chargers, Cable Seals | Marine and Outdoor Technology | Scanstrut
Installation Guide for SCANSTRUT models including: SC-SL-01, SC-SL-01-BLK, SC-SL-01 Starlink Luminium Wedge Mount, SC-SL-01, Starlink Luminium Wedge Mount, Luminium Wedge Mount, Wedge Mount
Scanstrut Starlink™ Flat Hi-Perf asennusteline tolppaan tai jalkaan, musta - Marinea erikoisliike ja verkkokauppa
SC-SL-01-BLK Aluminium 8° Wedge for boats
File Info : application/pdf, 6 Pages, 1.21MB
DocumentDocumentSC-SL-01 / SC-SL-01-BLK Part List PT-004765 101819 10-06-2024 (Issue 3) 60402 Installation Instructions Tools Required Option A Option B Foam Seal x1 60818 DS30 Shell x1 60821 DS30 Bungs x2 60080 M4 x 10 Bolt x4 60857 M8 x 16 Hex Tops x6 M8 x 25 Hex Tops x4 64015 60084 M8 Nyloc Nuts x4 6004972 M8 Nut Caps x4 60637 M8 Nylon Shoulder Washers x10 M8 Nylon Washers x4 1/4" Stainless 1/4" x 5/8" Cap Steel Washers x4 Head Screws x4 Parts Required Option A Option B M8 x 25mm+ Hex Tops x4 M10 x 25mm+ Hex Tops x4 ø32mm (1 1/4") Hole Saw/Drill Bit ø50-70mm (2"-2 3/4") Hole Saw ø8.5mm (21/64") Drill Bit No.1 Pozi Drive Screwdriver Power Drill 3/16" Allen Key 13mm Spanner Thread Lock Waterproof Cable Routing 1a Use the ø8.5mm bung supplied for routing the Starlink cable. Recommended Starlink Cable Length Pass smaller connector through the cable seal until the length is at least 600m (23.6"). 1b For routing a number of cables. Tip: freeze before drilling -18° ø = + 1.5mm 4mm (0.16") > 600mm (23.6") UK & International +44 (0)1392531280 sales@scanstrut.com Scanstrut Ltd Dart Business Park, Clyst St. George, Exeter EX3 0QH, UK For further installation and warranty information please visit: www.scanstrut.com USA +1 860 308 1416 usasales@scanstrut.com Scanstrut Inc. 7 Pequot Park Road Westbrook, CT 06498, USA SC-SL-01 / SC-SL-01-BLK Option A - Mounting to Deck: 10-06-2024 (Issue 3) Installation Instructions 4x 60402 101819 4x M8 Fasteners (Not Supplied) 4x 64015 PT-004765 ø32mm (1 1/4") ø8.5mm (21/64") UK & International +44 (0)1392531280 sales@scanstrut.com Scanstrut Ltd Dart Business Park, Clyst St. George, Exeter EX3 0QH, UK For further installation and warranty information please visit: www.scanstrut.com USA +1 860 308 1416 usasales@scanstrut.com Scanstrut Inc. 7 Pequot Park Road Westbrook, CT 06498, USA SC-SL-01 / SC-SL-01-BLK 10-06-2024 (Issue 3) Installation Instructions Option B - Mounting to: · DPT-R · DPT-R-COMP · DPT-OA 6x 60818 6x 64015 4x 60402 101819 19070 (supllied with DPT) For more information, see installation instructions for DPT-R. DPT-LB-02 ONLY Optional (DOES NOT FIT DPT-LB-01) light bar 64004 (supllied with DPT) M10 Fasteners (Not Supplied) 19008 (supllied with DPT) Forward ø8.5mm (21/64") ø32mm (1 1/4") UK & International +44 (0)1392531280 sales@scanstrut.com Scanstrut Ltd Dart Business Park, Clyst St. George, Exeter EX3 0QH, UK For further installation and warranty information please visit: www.scanstrut.com USA +1 860 308 1416 usasales@scanstrut.com Scanstrut Inc. 7 Pequot Park Road Westbrook, CT 06498, USA SC-SL-01 / SC-SL-01-BLK 10-06-2024 (Issue 3) Installation Instructions Option C - Mounting to: · SC103 · SC104 4x 60821 4x 64015 Recommended Cable Routing: 4x 60084 4x 60080 4x 60857 For more information, see installation instructions for SC100. UK & International +44 (0)1392531280 sales@scanstrut.com Scanstrut Ltd Dart Business Park, Clyst St. George, Exeter EX3 0QH, UK For further installation and warranty information please visit: www.scanstrut.com USA +1 860 308 1416 usasales@scanstrut.com Scanstrut Inc. 7 Pequot Park Road Westbrook, CT 06498, USA SC-SL-01 / SC-SL-01-BLK 1 10-06-2024 (Issue 3) 2 Installation Instructions 4x 64015 4x 6004972 4x 60637 UK & International +44 (0)1392531280 sales@scanstrut.com Scanstrut Ltd Dart Business Park, Clyst St. George, Exeter EX3 0QH, UK For further installation and warranty information please visit: www.scanstrut.com USA +1 860 308 1416 usasales@scanstrut.com Scanstrut Inc. 7 Pequot Park Road Westbrook, CT 06498, USA SC-SL-01 / SC-SL-01-BLK 10-06-2024 (Issue 3) Installation Instructions IMPORTANT Wedge Mounts are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide subject to change without prior notice. Use of the Wedge Mounts with unapproved products, or overloading, invalidates any product warranty. Scanstrut does not supply fastenings to fix this product to the chosen surface. Please choose suitable fastenings for this purpose. No liability is accepted for damage caused by incorrect installation. The installation and assembly must be regularly inspected for evidence of damage or loose parts. Product has been designed specifically for the mounting of approved marine electronics under normal boating conditions. IMPORTANT Supports de cale sont uniquement compatibles avec les appareils d'électronique marine repris dans le dernier Guide Produits Scanstrut sujet à Modifica-tion sans préavis. L'usage des Supports de cale avec des produits non validés, ou la surcharge de ces supports, annulent toute garantie. Scanstrut ne fourni pas les fixations pour sécuriser ce produit à la surface de choix. Veuillez utiliser des fixations appropriées pour cette opération. Scanstrut déclinent toute responsabilité pour les dégats résultant d'une installation incorrecte. L'installation et l'assemblage doivent être inspectés régulièrement afin de déceler des dégats ou des pièces désserrées Ce produit a été spécifiquement conçu pour le montage d'appareils d'électronique marine approuvés dans des conditions de navigation normales. WICHTIG Keilhalterungen sind nur mit Elektronikgeräten für die Schifffahrt kompatibel, wie in der aktuellen Scanstrut Produktübersicht er- wähnt. Änderungen ohne vorherige Ankündigung vorbehalten. Durch die Verwendung mit nicht genehmigten Produkten bzw. durch Überlastung wird jegliche Garantie ungültig. Befestigungsteile für die Montage dieses Produkts auf der gewählten Oberfläche. Bitte wählen Sie geeignete Befestigungsteile für diesen Zweck. Für Schäden aufgrund unsachgemäßen Einbaus wird keine Haftung übernommen. Der Anbau und die Baueinheit müssen regelmäßig auf Anzeichen von Schäden oder lockere Teile geprüft werden. Dieses Produkt wurde spezifisch für die Befestigung genehmigter Elektronikgeräte für die Schifffahrt unter normalen Bootsfahrtsbedingungen entwickelt. IMPORTANTE Supporti a cuneo sono compatibili solo con apparecchiature elettroniche navali come indicato nella più recente Guida ai Prodotti Scanstrut fatte salve eventuali modifiche senza preavviso. L'uso di supporti a cuneo con prodotti non approvati, o un loro sovraccarico, invalida qualsiasi garanzia. Scanstrut non fornisce dispositivi per fissare questo prodotto alla superficie prescelta. Scegliere dispositivi di fissaggio adatti a questo scopo. Si declina qualsiasi responsabilità per danni causati da un'installazione erronea. L'installazione e il montaggio devono essere ispezionati con regolarità per verificare la presenza di danni o di pezzi allentati. Questo prodotto è stato studiato appositamente per il supporto di apparecchiature elettroniche navali approvate in normali condizioni di navigazione. IMPORTANTE Montajes de cuña son compatibles únicamente con equipos electrónicos marinos según se establece en la última Guía de Productos Scanstrut sujeto a cambios sin previo aviso. El uso de los montajes de cuñacon productos no aprobados, o bajo exceso de carga, invalidará cualquier garantía. Scanstrut no suministra anclajes para fijar el producto sobre la superficie elegida. Escoja el sistema de fijación más adecua- do para este propósito. No se aceptará ninguna responsabilidad por los daños causados por una instalación incorrecta. La instalación y ensamblaje deberá inspeccionarse regularmente, comprobando cualquier evidencia de daños o piezas aflojadas. Este producto ha sido específicamente diseñado para el montaje de equipos electrónicos marinos aprobados bajo condi- ciones normales de navegación. UK & International +44 (0)1392531280 sales@scanstrut.com Scanstrut Ltd Dart Business Park, Clyst St. George, Exeter EX3 0QH, UK For further installation and warranty information please visit: www.scanstrut.com USA +1 860 308 1416 usasales@scanstrut.com Scanstrut Inc. 7 Pequot Park Road Westbrook, CT 06498, USA