Sage SES985BSS4EEU1 Oracle Jet User Guide

Power Consumption: 30mA
Wireless Frequencies:
- BT Classic: 2402 MHz to 2480 MHz @ 11 dBm
- BT LE: 2402 MHz to 2480 MHz @ 11 dBm
- 2.4G WIFI: 2412 MHz to 2472 MHz @ 18 dBm
- 5G WIFI: 5180 MHz to 5320 MHz @ 15 dBm
- 5500 MHz to 5720 MHz @ 15 dBm
- 5745 MHz to 5865 MHz @ 15 dBm

Indoor Use Only

Product Usage Instructions

Assembly
Follow the provided user guide for step-by-step assembly instructions.

Settings
Customize the heated group head temperature to your preference by adjusting in +/- 1 degree celsius increments.

Care & Cleaning
Use a soft cloth for cleaning, avoid alkaline cleaning agents. Refer to the manual for detailed cleaning instructions.

Troubleshooting
If you encounter issues, refer to the troubleshooting section of the user guide or contact customer support.

FAQ

Q: Can I use alkaline cleaning agents for cleaning?
A: No, it is recommended to avoid alkaline cleaning agents and use a soft cloth for cleaning to prevent damage to the appliance.
Q: What should I do if I face issues during operation?
A: Refer to the troubleshooting section in the user guide for solutions or contact customer support for assistance.

GUARA NTEE

2 YEAR LIMITED
Sage Appliances guarantees this product for domestic use in specified territories for 2 years from the date of purchase against defects caused by faulty workmanship and materials. During this guarantee period Sage Appliances will repair, replace, or refund any defective product (at the sole discretion of Sage Appliances).

All legal warranty rights under applicable national legislation will be respected and will not be impaired by our guarantee. For full terms and conditions on the guarantee, as well as instructions on how to make a claim, please visit www.sageappliances.com

SAGE® RECOMMENDS SAFETY FIRST

At Sage® we are very safety conscious.We design and manufacture appliances with your safety foremost in mind. We also ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT
SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

Remove and discard any packaging materials safely, before first use.
Ensure the product is properly assembled before first use and fully unwind the power cord before operating.

Before using for the first time, please ensure that your electricity supply is the same as shown on the rating label on the underside of the appliance. If you have any concerns, please contact your local electricity company.
The installation of a residual current safety switch is recommended to provide additional safety when using all electrical appliances. Safety switches with a rated operating current not more than 30mA are recommended. Consult an electrician for professional advice.

Regularly inspect the power cord, plug and actual appliance for any damage. If found to be damaged in any way, immediately cease use of the appliance and return the entire appliance to the nearest authorised Sage Service Centre for examination, replacement or repair.
Do not let the power cord hang over the edge of a counter or table. Do not let the power cord touch hot surfaces or become knotted.

To eliminate a choking hazard for young children, discard the protective cover fitted to the power plug safely.
Position the appliance on a stable, heat resistant, level, dry surface away from the counter edge, and do not operate on or near a heat source such as a hot plate, ovenor gas hob.

Do not operate the appliance in an enclosed space, or inside a cupboard.
Do not use attachments other than those provided with the appliances. The use of attachments not sold or recommended by Sage may cause fire, electric shock or injury.
This appliance is for household use only. Do not use the appliance for anything other than its intended purpose. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
Keep the appliance and accessories clean. Follow the cleaning instructions provided in this book. Servicing other than cleaning should be performed at an authorised Sage Service Centre.
Do not touch hot surfaces. Always ensure the appliance has been allowed to cool; if the appliance is to be:
- Left unattended, cleaned, changed accessories, moved, assembled or stored, always switch off the espresso machine by pressing the POWER button to OFF. Switch off at the power outlet and unplug.
Improper use of the appliance incorrectly operated or unprofessionally repaired. In such a case, any warranty claim is void. No warranty for any damages can be accepted.
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
Use caution when operating machine as metal surfaces are liable to get hot during use. Heating element surface is subject to residual heat after use.
Do not fill the water tank or front top fill with hot water or milk.
Do not use the appliance without water in the water tank.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Cleaning and user maintenance shall not be made by children. Keep the appliance and its cord out of reach of children.
Do not open the programming port, this is exclusively for authorised service personnel only.
Do not operate the grinder without the hopper lid in position. Keep fingers, hands, hair, clothing, and utensils away from the hopper during operation.
Ensure the portafilter is firmly inserted and secured into the group head before starting an extraction. Never remove the portafilter during the extraction process. Failure to follow this instruction may lead to scalding by hot steam or hot coffee.
The front top fill is not for milk. Do not pour milk in the front top fill.
Use caution after milk texturing, as the ‘Auto Purge’ function may purge hot steam when steam wand is lowered.

Wipe the outer surface with a soft dry cloth. Keep the appliance and accessories clean.
Servicing other than cleaning should only be performed by an authorised service representative or at an authorised Sage Service Centre.
Any alcohol based cocktail drinks are intended for use solely by the responsible adults of legal drinking age in their respective country and /or state and/ or province. Please use the recipes wisely and responsibly.

NOTICE TO CUSTOMERS REGARDING MEMORY STORAGE
Please note that in order to better serve our customers, internal memory storage has been embedded into your appliance. This memory storage consists of a small chip to collect certain information about your appliance including the frequency of use of the appliance and the manner in which your appliance is being used. In the event your appliance is returned for service, the information collected from the chip enables us to quickly and efficiently service your appliance.

The information collected also serves as a valuable resource in developing future appliances to better serve the needs of our consumers. The chip does not collect any information regarding the individuals who use the product or the household where the product is used. If you have any questions regarding the memory storage chip please contact us at privacy@sageappliances.com

SPECIFIC INSTRUCTIONS FOR WATER FILTER

Filter cartridge should be kept out of reach of children.

Store filter cartridges in a dry place in the original packaging.
Protect cartridges from heat and direct sunlight.
Do not use damaged filter cartridges.

Do not open filter cartridges.
If you are absent for a prolonged period of time, empty the water tank and replace the cartridge.

WARNING
To avoid the risk of injury, do not open the brew chamber during the brew process.

NOTE
To prevent damage to the appliance, do not use alkaline cleaning agents when cleaning, use a soft cloth.

To protect against, fire, electric shock; do not immerse the power cord, power plug or appliance in water or any other liquid.

The symbol shown indicates that this appliance should not be disposed of in normal household waste.

It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.

BT classic: 2402 MHz to 2480 MHZ @ 11 dBm
BT LE: 2402 MHz to 2480 MHz @ 11 dBm

2.4G WIFI: 2412 MHz to 2472 MHz @ 18 dBm
5G WIFI: 5180 MHz to 5320 MHz @ 15 dBm
5500 MHz to 5720 MHz @ 15 dBm

5745 MHz to 5865 MHz @ 15 dBm

The device is restricted to indoor use when operation in the 5150-5350 MHz frequency range.

FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

Components

A. 340g bean hopper
B. Front top water fill

C. Grind size adjustment dial
D. Power button
E. 5 inch HD touch screen

F. Grind and tamp outlet
G. Heated 58mm group head
H. Dedicated hot water outlet

I. Auto MilQ™ steam wand 6
J. Milk temperature sensor
K. Front lever 3rd wheel

L. Drip tray grill
M. Drip tray
N. Water tank lid

O. Water tank mesh lid
P. Water tank
Q. Power cord with storage

R. Hidden tool storage tray

Accessories

Water filter and filter holder

Descaling Powder
Knock Box™ 10
Single wall 1 Cup filter basket

Single wall 2 Cup filter basket*
58 mm Stainless Steel Portafilter
Grind outlet brush and tamp removal magnet

Cleaning brush
Cleaning tool for steam wand tip
Hex Key

Cleaning disc
Cleaning tablets
Water hardness strip

Drip tray guard (included with machines in colour only)
Stainless steel milk jug

* Single wall 2 Cup filter basket comes installed in the portafilter

Features

THERMOJET HEATING SYSTEM
The state-of-the-art heating system is our fastest and most efficient heating system. Ready to go in seconds.

THERMOJET HEATED GROUP HEAD
Ensuring a stable and optimised extraction that meets professional level specifications. The heated group head can be customised in +/- 1 degree celsius increments to suit your taste.

AUTO GRIND DOSE & TAMP
Fully-integrated hardened precision conical burr grinder automatically grinds, doses and tamps 22 grams of coffee straight into the 58mm professional style portafilter.

AUTO MILQ
Silky smooth microfoam with settings for dairy, soy, almond and oat. Adjustable temperatures (45°C to 75°C) and 8 texture levels.

BARISTA GUIDANCE
By automatically detecting an over or under extracted espresso shot, Barista Guidance helps you adjust the grind size to achieve a more ideal pour.

5 INCH HD TOUCH SCREEN
A dynamic screen that is 4 times richer and 20 times more powerful than before.You can swipe, select and enjoy in high definition.

COLD COFFEE

Cold Brew
Brewing at lower temperatures reduces acidic flavour notes that heat retains.This creates a smooth and mellow flavour profile that can be enjoyed on its own or form the base for your cold brew experiments!

Cold Espresso
Extract at lower temperature produces a full flavoured crema topped espresso without the heavy tones.The cold espresso feature keeps the classic flavour while being softer and lighter in body.

AUTO QUEUE
Auto queue is a feature that allows to sequence the next function during selected milk based drinks:

Brew coffee first and queue milk texturing.
Texture milk first and queue coffee brewing.

PID TEMPERATURE CONTROL
Electronic temperature control delivers precise water temperature for optimum espresso flavour.

DEDICATED HOT WATERSPOUT
Dedicated hot water outlet for making long blacks, teas, and pre-heating cups.

DOUBLE TAP
Double tap on the grind, brew or steam icons to automatically purge the system ready for your brew.

Assembly

BEFORE FIRST USE

Machine Preparation

Remove and discard all labels and packaging materials attached to your espresso machine.

Ensure you have removed all parts and accessories from the box before discarding the packaging.
Remove the water tank located at the back of the machine unlocking the latch and pulling the water tank from the latch handle.
Clean parts and accessories (water tank, portafilter, filter baskets, milk jug) using warm water and a gentle dish washing liquid. Rinse well then dry thoroughly.

NOTE
Machines with colour, drip tray protection guard is included. DO NOT DISCARD.

INSTALLING THE WATER FILTER

Remove the water filter and water filter holder from the plastic bag.

Soak the filter in cold water for 5 minutes.
Rinse the filter holder with cold water.
Set a reminder for replacement. We recommend to replace filter every 3 months.

Insert the filter into the two parts of the filter holder.
To install the assembled filter holder into the water tank, align the base of the filter holder with the adapter inside the water tank. Push down to lock into place.

NOTE
Replacing the water filter every three months will reduce the need to descale the machine. Filters can be purchased at www.breville.com

NOTE
Input the water hardness test strip result to the machine. If result is 4 or 5 bars when tested, we strongly recommend to change to an alternate water source. Filtered water will extend both the life of your built-in filter and descale intervals as well as provide superior taste. Ensure to test the water hardness of the alternative water source you’ve chosen and input into the machine accordingly. Avoid using overly filtered water, like RO water unless some mineral content is being added back to the final water. Never use distilled water, or water with no or low mineral content as this will affect the taste of coffee.

Guide and Settings

GUIDES

Startup Tutorial – Take you through the startup tutorial on how to make a coffee with the machine.
QR code links – Provides QR code links to areas such as Support, Machine Registration and Maintenance Products.
Understanding your Oracle Jet – Describes the key components of your coffee machine.

SETTINGS

Drink Settings

Barista Guidance – Switch on for grind size recommendations during your extractions.

Brew control settings – Switch between time or volumetric based brew output.
Temperature settings – Adjust the brew temperature.

Maintenance

Clean steam wand – Guides you through cleaning the steam wand to remove any blockage for better steaming performance.
Clean group head – Cleans the group head of oils and residue. Will require an Espresso cleaning tablet or powder.
Descale – Descaling prevents excess mineral and scale build-up. Will require descaling powder or solution.

Change water filter – To ensure machine has clean water to use.
Water hardness test – Configures the water hardness your machine is using. You will need an unused test strip.

Machine Settings

Theme – Switch between light or dark mode. Sound – Adjusts the volume of the interface. Screen brightness – Adjusts the brightness of the screen.
Light brightness – Adjust the brightness of the LED lights.
Units – Switch between imperial and metric units. Country and Language – Select your region and preferred language on screen.
Time and Date – Set the time and date on the machine.
Wi-Fi – Connect to Wi-Fi to receive the latest software updates.
Demo mode – Looping video to to showcase key features of the machine.
About the machine – Shows the serial number and firmware version of the machine.
Reset factory settings – Use this function to reset all programmable values back to the factory settings and delete all custom drinks.

WARNING
Do not unplug the machine while it is performing this function.

Care & Cleaning

HD TOUCH SCREEN DISPLAY
Excess dirt and grime can get in the crevices of your touch screen impairing its functionality. Keep the touch screen dry and clean to ensure optimal functionality. Use a screen cleaning wipe or a dry soft cloth.

CLEANING CYCLE

There will be a message prompt when a cleaning cycle is required.
This is a backflushing cycle and is separate from descaling.There is also the option to start the cleaning cycle by choosing ‘Clean Cycle’ in
‘Settings’.The cleaning cycle cleans the shower screen and back-flushes the group head to remove the build up of coffee and oils.
Follow the instruction on the screen.

DESCALING

There will be a message prompt when a descale cycle is required.
Even with the provided water filter, it is recommended to descale if there is scale buildup in the water tank.
There is also the option to start the descale cycle by choosing ‘Descale Cycle’ in the ‘Settings’.
Follow the instruction on the screen.

CLEANING THE STEAM WAND

The steam wand should always be cleaned after texturing milk.Wipe the steam wand with a damp cloth.
If any of the holes in the tip of the steam wand become blocked, it may reduce frothing performance.
Go to ‘Settings’ > ‘Steam wand cleaning’ and follow the guide on the screen.

NOTE
Ensure the steam wand tip is tightly fastened after cleaning

CLEANING THE FILTER BASKET AND PORTAFILTER

The filter basket and portafilter should be rinsed under hot water after each coffee making session to remove all residual coffee oils.
If the holes in the filter basket become blocked, dissolve a cleaning tablet in hot water and soak filter basket and portafilter in solution for approx. 20 minutes. Rinse thoroughly.

CLEAR WATER BACKFLUSH

After each coffee making session we recommend doing a clear water backflush before you turn off the machine. Empty drip tray. Insert the cleaning disc into the filter basket then insert the portafilter into the group head.Touch the brew icon button and allow pressure to build for 20 seconds, then tap the glass image to stop & release pressure.

CLEANING THE SHOWER SCREEN

• The group head interior and shower screen should be wiped with a damp cloth to remove any ground coffee particles.
Periodically purge the machine. Place an empty filter basket and portafilter into the group head. Tap the brew icon on the screen and run a short flow of water to rinse out any residual coffee.

CLEANING THE DRIP TRAY & STORAGE TRAY

The drip tray should be removed, emptied and cleaned at regular intervals, particularly when the drip tray is full.
Remove the grill from the drip tray. Lift the coffee grind separator and dispose of any coffee grounds.Wash all parts in warm soapy water with a soft cloth. Rinse and dry thoroughly. The storage tray (located behind the drip tray) can be removed and cleaned with a soft, damp cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface.

CLEANING THE OUTER HOUSING
The outer housing can be cleaned with a soft, damp cloth. Polish with a soft, dry cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface.

NOTE
All parts should be cleaned by hand using warm water and a gentle dish washing liquid. Do not use abrasive cleansers, pads or cloths which can scratch the surface. Do not clean any of the parts or accessories in the dishwasher.

CLEANING CONICAL BURRS

Regular cleaning helps the burrs achieve consistent grinding results which is especially important when grinding for espresso.

Unlock hopper
Remove beans
Replace & lock hopper
Run grinder until empty
Unlock & remove hopper
Remove upper burr
Clean upper burr with burr brush
Clean lower burr with burr brush
Remove tamping fan with tamp removal magnet
Clean grind outlet with grind outlet brush
Replace tamping fan by hand
Push upper burr until it clicks and firmly locked into position.
With the burr firmly locked in position, safely replace the hopper into the machine
Lock the hopper
Replace the hopper lid

NOTE
This machine is designed only for whole roasted coffee beans. Avoid grinding unroasted green and under-roasted coffee beans.These are dense and not brittle enough to run through a burr grinder.This will damage or break burr grinders and even pose a safety risk.

TIP
It is recommend to use quality 100% Arabica beans with a ‘Roasted On’ date stamped on the bag, not a ‘Best Before’ or ‘Use By’ date. Coffee beans are best consumed between 5–20 days after the ‘Roasted On’ date. Stale coffee may pour too quickly from the portafilter spouts and taste bitter and watery.

ADJUSTING TAMPING HEIGHT FROM THE GRIND COLLAR

Turn off and disconnect the machine from the power source. To adjust the tamping height, use the hex key provided. Pull the tamping fan down from the grind collar, and then pull down on the fan coupling inside the grind collar to remove it. Adjust the length of the coupling by loosening the fastener with the hex key and rotating the coupling to the desired length.

Troubleshooting

CONNECTING YOUR ORACLE JET
The Oracle Jet is a Wi-Fi-enabled machine that will support downloading the latest software version. If the machine is not connected to a Wi-Fi, the machine can still be operated in the same way as an espresso machine with no network connection.

NOTE
We are constantly working to improve the software that may lead to changes in functionality and setup steps. Please rely on the instructions in the latest version by upgrading the software to guide you through the setup process.

No Wi-Fi available

NO signal coverage, mobile phone or Wi-Fi router available.
Connect your coffee machine to your mobile phone hot spot.
Connect your coffee machine to your Wi-Fi router (if available). NOTE: For optimal performance, it is highly recommended to continue to have your machine connected to Wi-Fi so that it can regularly check for software updates.
It is possible to use the machine without Wi-Fi. If the software version persist on connecting to Wi-Fi, follow these steps on the connection screen:
- Enter the Select your network.
- Select Other if there is no internet.
- Click the arrow button to skip the Network selection.
- Click the arrow button to skip the Password entry.
- A “Connecting” error is likely to occur.

Select Try again and repeat above steps. After the second failed attempt, click Update later to skip Wi-Fi setup.

QR Code Links

Extraction Guide
https://scan.sageappliances.com/bes985/extractionguideClean Steam Wand
https://scan.sageappliances.com/bes985/cleansteamwand Tutorial
https://scan.sageappliances.com/bes985/tutorials Descale
https://scan.sageappliances.com/bes985/descale Texture Milk
https://scan.sageappliances.com/bes985/milktexturing

UK PSTI Statement of Compliance

Product type:
Model name:
Name and address of manufacturer:
- Coffee Machine
- SES985
- Breville Pty Ltd.
- Suite 2, 170-180 Bourke Road Alexandria, NSW, 2015, AUSTRALIA
This declaration of compliance is prepared by the manufacturer of this product.
To the best of their knowledge, the manufacturer has complied with the deemed compliance conditions in Schedule 2:
UK Product Security and Telecommunications Infrastructure Act 2022 and UK PSTI Regulations 2023 – Security Requirements for Relevant Connectable Products, Schedule 2.
- References to the relevant standards in relation to which conformity is declared:
- ETSI EN 303 645 V2.1.1 (issued 2020-06) Provisions:
- 5.1-1 and 5.1-2 for passwords (if applicable) 5.2-1 for reporting security issues
- 5.3-1 for minimum security update periods
Defined support period for the product.
- Signed for and on behalf of
- the manufacturer:
- Place and date of issue:
- Name:
- Function:
- Signature:

The support period of the connected product listed will have a minimum of 5 (five) years from its first commercial launch in Oct 2024.

Breville Pty Ltd Australia
Place: Sydney
Date: 15 July 2024
Brendan Foxlee
Head of Compliance and Market Expansion

EU & UK Declaration of Conformity Hereby we,
Name and address of manufacturer: Breville Pty Ltd, Suite 2, 170-180 Bourke Road, Alexandria, NSW, 2015, AUSTRALIA declare that this DoC is issued under our sole responsibility for below equipment:

Product description: Coffee Machine
Type designation(s): SES985
Trademark: Sage
Batch number: SES985XXXXXXXX (X = 0-9 or A-Z or blank)

Object of the declaration described above is in conformity with the relevant Union harmonization legislation as below:

Radio Equipment Directive: 2014/53/EU The Radio Equipment Regulations 2017

EN 62311:2020
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021
EN 60335-2-14:2006 + A1:2008 + A11:2012 + A12:2016
EN 60335-2-15:2016 + A11:2018 + A1:2021 + A2:2021 + A12:2021 EN 62233: 2008
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
EN 301 489-1 V2.2.3
EN 301 489-3 V2.3.2
EN 301 489-17 V3.2.4
EN 300 328 V2.2.2 EN 301 893 V2.1.1 EN 300 440 V2.2.1

Furthermore, the notified body [SGS North America, Inc.], with notified body number [2906], performed Module B in Annex III of Directive [2014/53/EU], and issued the EU TEC No. [NB2906.2023.000272].

Signed for and on behalf of the manufacturer: Breville Pty Ltd Australia

Place and date of issue: Place: Sydney
Printed name: Brendan Foxlee
Date: 22 July 2024
Function: Head of Compliance and Market Expansion
Signature:

BRG Appliances Limited
86–90 Paul Street, London, EC2A 4NE, United Kingdom
Freephone (UK Landline): 0808 178 1650 Mobile Calls (National Rate): 0333 0142 970

www.sageappliances.com

Registered in England & Wales No. 8223512
Registered in Germany No. HRB 81309 (AG Düsseldorf)
Registered in France No. 879 449 866 RCS

Due to continued product improvement, the products illustrated or photographed in this document may vary slightly from the actual product.

Documents / Resources

Sage SES985BSS4EEU1 Oracle Jet [pdf] User Guide
SES985BSS4EEU1 Oracle Jet, SES985BSS4EEU1, Oracle Jet, Jet

References

User Manual

Sage SES985BSS4EEU1 Oracle Jet