SAGE LU MEI R1 10-Key RF Remote Controller
Features
- Apply to single color, dual color, RGB, RGBW or RGB+CCT RF LED controller.
- Each remote can match one or more receiver.
- CR2032 battery powered.
- Operate with LED indicator light.
- White & Black available.
Technical Parameters
| Input and Output | |
| Output signal | RF(2.4GHz) |
| Working voltage | 3VDC(CR2032) |
| Working current | <5mA |
| Standby current | <2μA |
| Standby time | 2 years |
| Remote distance | 30m(Barrier-free space) |
| Safety and EMC | |
|
EMC standard (EMC) |
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Safety standard (LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment (RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE,EMC,LVD,RED |
| Warranty | 5 years |
| Environment | |
| Operation temperature | Ta: -30 OC ~ +55 OC |
| IP rating | IP20 |
| Packing | |
| Size of the box | L138 x M50 x H22(mm) |
| Gross weight | 0.040kg |
Dimension
To fix the remote, three options are offered for selection:
- Option 1: fix the remote’ back holder on the wall with two screws.
- Option 2: adhere the remote’ back holder to the wall with paster.
Note: Before the first use,
please remove the protective film on the battery.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways.There are two options offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Key function
R1 1 zone dimming remote
- Brightness+/-: Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
- Scene 1/2: Brightness memory. Short press recall the scene, long press 2s save the current brightness into the scene. the LED indicator will light up longer when save OK.
R2 1 zone CCT remote
- Color temperature+/-: Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
- Brightness+/-: Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
- Scene 1/2: Short press recall the scene, long press 2s save the current color into the scene. the LED indicator will light up longer when save OK.
RU4 4 zone dimming remote
- All on: Turn on all 4 zone light.
- All off: Turn off all 4 zone light.
- Zone 1-4 on: Short press turn on zone light, long press 1-6s increase brightness continuously.
- Zone 1-4 off:Short press turn off zone light, long press 1-6s decrease brightness continuously.
RU8 8 zone dimming remote
- All on: Turn on all 8 zone light.
- All off: Turn off all 8 zone light. Zone 1-8 on/off:
- Short press turn on/off zone light, long press 1-6s increase or decrease brightness continuously.
R8S 8 scene remote
- ON: Turn on the last scene light.
- OFF: Turn off the last scene light.
- Scene 1-8: Recall the scene which saved in the RF controller.
- Note: The remote only have scene recall function defaultly. If you want to use scene save function, please long press ON + S8 key 2s to enable scene save function, then long press Scene 1-8 key 2s save the current color into this scene number. the LED indicator will light up longer when save OK. When all 8 scene save OK, please long press OFF + S8 key 2s to disable scene save function.
Safety information
- Read all instructions carefully before you begin this installation.
- When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
- If no response from the receiver, please re-match the remote.
- Gently handle remote, beware of falling.
- For indoor and dry location use only.
Documents / Resources
 |
SAGE LU MEI R1 10-Key RF Remote Controller [pdf] Instruction Manual R1 10-Key RF Remote Controller, R1, 10-Key RF Remote Controller, Remote Controller, Controller |
