Roth Touchline SL Valve Module Instruction Manual

Roth Touchline SL Valve Module

Specifications

Installation and setup Roth Touchline® SL Valve module

• This guide can be followed if your system is only to be set up for heating with following default settings:
• Heating mode: “Heat on demand” (does not require an outdoor sensor)
• Heat demand: Low ≤ 25 W/m², variable supply temperature from 25 – 35°C (in steps of +/-1°C)
• Floor protection: Max. flow temperature 40°C
• For other types of setup, we refer to the full installation instructions and user manual.

Connection to Master/Connection to Extension

Setup – Heat by demand

Device Access and Registration

• Navigate to the “Modules” menu.
• Select “Valve Module” and choose “Register”.
• Enter the registration code: 30914.
• Confirm the registration and wait for the process to complete.
• Upon successful registration, the information will be displayed.

ROTH NORGE AS · Tel. +47 67 57 54 00 · E-mail: service@roth-norge.no · roth-norge.no

FAQ