ROSA LED Drop Owner’s Manual
TECHNICAL DATA
Application residential roads (internal), surrounding oce buildings, parks, pedestrians
Assembly on extension arms with ⌀ 42 x 30 mm ending
Colour inox / graphite
Ingress protection IP 66
Optical system PMMA optics
Material anodised aluminium alloy
Expected useful lifetime L90B10 – 100 000 h
CRI >70
Inrush current 21A / 225µs
Input voltage frequency 50/60Hz
Power factor ≥0.95
Number of LED 16
Control system Luminaire has the possibility to connect to an external control system via DALI interface (optionally via analog signal 1- 10V).
Assembly on extension arms with ⌀ 42 x 30 mm ending
Colour inox / graphite
Ingress protection IP 66
Optical system PMMA optics
Material anodised aluminium alloy
Expected useful lifetime L90B10 – 100 000 h
CRI >70
Inrush current 21A / 225µs
Input voltage frequency 50/60Hz
Power factor ≥0.95
Number of LED 16
Control system Luminaire has the possibility to connect to an external control system via DALI interface (optionally via analog signal 1- 10V).
| Code | Symbol | LED power | Luminaire power consumption | LED forward current | Colour temperature (CCT) | LEDs luminous flux | Luminaire luminous flux¹ | Luminous ecacy¹ | Unit volume | Net weight |
| 214930/6/…² | DROP LED 24 | 24 W | 28 W | 500 mA | 5000 K | 4350 lm | 4150 lm | 148 lm/W | 0.041 m³ | 4.9 kg |
- tolerance +/- 5% due to LEDs accuracy
- symbol of chosen optical system eg. 214933/6/S is DROP LED 48 5000K with symetric optical system
DIRECTIVES AND STANDARDS
DIRECTIVES: 2014/35/UE (Official Journal of the UE L 96/357 29.03.2014), 2014/30/UE (Official Journal of the UE L 96/79 29.03.2014), 2011/65/UE, 2009/125/EC STANDARDS: –
CHARGING DISCHARGE FROM THE LED LUMINAIRE HOUSING
In order to efficient discharge the electrostatic charge from the housing of LED fitting installed on the pole from dielectric material (non-conductive) one of the following solutions is required:
- functional grounding
- LED luminaire with an additional protection device
TECHNICAL DRAWING
PHOTOMETRIC CURVES
POWER SYSTEM FUNCTIONS
Luminaire in standard has following functions of intelligent power supply:
- Connection to outside control system by DALI interface (operation of analog signal 1-10V as an option),
- Possibility of programming multistage dimming of luminaire, up to 5 intervals in the range of from 10 to 100% of nominal power,
- Temperature protection of LED module (from overheating) in case of unintentional luminaire operation during the,
- Regulation of power / luminous ux – the option of setting another value than the catalogue in the range of 30-100% of nominal one,
ACCETABLE QUANTITY OF LUMINAIRES ON ONE CIRCUIT
Overcurrent switches MCB type B or C
| Luminaire | Typ | 2A | 4A | 6A | 10A | 16A | 20A | 25A |
| DROP LED 48 | B | 1 | 2 | 4 | 6 | 12 | 12 | 15 |
| C | 1 | 4 | 6 | 10 | 17 | 20 | 26 | |
| DROP LED 24, 36 | B | 3 | 6 | 10 | 16 | 26 | 32 | 40 |
| C | 3 | 10 | 16 | 27 | 44 | 54 | 67 |
Fuse – type gG and GL
| Luminaire | 2A | 4A | 6A | 10A | 16A | 20A | 25A |
| DROP LED 48 | 0 | 4 | 8 | 11 | 22 | 31 | 44 |
| DROP LED 24, 36 | 1 | 10 | 19 | 25 | 50 | 68 | 97 |
Zakład Produkcji Sprzętu Oświetleniowego „ROSA” Sp. z o.o.
43-109 Tychy, ul. Strefowa 1 tel. +48 32 73 88 901
www.rosa.pl
Documents / Resources
 | LED Drop |
References
- User Manualmanual.tools
Published: January 2, 2024