TB-1 Input Panel Lighting
“
Product Information
Specifications
- Model: TB-1
- Description: Prese per fusibili
- Number of fuse sockets: 1
- Insulation Class: II
- Nominal Insulation Voltage: 500 V
- Nominal Impulse Voltage: 6 kV
- Nominal Current: 80 A
- Net Weight: 0.71 kg
- Installation: Aluminium rail on the back wall
of the column using two M6 bolts - IP Rating: IP 54
- Material:
- Morsettiera rinforzata – PBT (butilene politereftalato)
- Cover housing and terminal covers – Transparent
polycarbonate - System base – Polycarbonate reinforced with glass fiber
Product Usage Instructions
Installation
To install the TB-1, follow these steps:
- Mount the product on the aluminium rail located on the back
wall of the column using two M6 bolts. - Ensure a secure fit to prevent any movement or
instability.
Usage
To use the TB-1:
- Insert the fuse into the designated socket.
- Make sure the electrical connections are secure.
- Check the IP rating to ensure it meets the necessary protection
requirements for your application.
Maintenance
Regularly inspect the TB-1 for any signs of damage or wear.
Replace any fuses that have blown and ensure all connections are
tight and secure.
Safety Precautions
Always disconnect power before installing or servicing the TB-1.
Follow all relevant safety guidelines and regulations to prevent
electric shock or injury.
Frequently Asked Questions (FAQ)
Q: What is the IP rating of the TB-1?
A: The TB-1 has an IP rating of IP54, indicating protection
against dust and water splashes.
Q: What is the maximum current rating for the TB-1?
A: The TB-1 has a maximum current rating of 80 A.
Q: How many fuse sockets does the TB-1 have?
A: The TB-1 has one fuse socket.
“`
TB-1
DATI TECNICI
Montaggio Grado di protezione Materiale
Prese per fusibili Descrizione
installed on the aluminium rail on the back wall of the column using two M6 bolts
IP 54
morsettiera rinforzata – PBT (butilene politereftalato – un materiale con parametri isolanti e alta resistenza meccanica); coperchio dell’alloggiamento e coperchio dei terminali e degli schermi – policarbonato trasparente; base di sistema – policarbonato rinforzato con bra di vetro; l’aria fuoriesce dalle guarnizioni
Una presa fusibile montata sulla fase L1, è possibile spostare la presa fusibile sulla fase L2 o L3 svitando due viti
Connettori a quattro piste – per cavi di alimentazione con sezione trasversale: da 4 x 10 mm² a 4 x 35 mm² per Cu da 4 x 16 mm² a 4 x 35 mm² per Al
Sezione trasversale del cavo di uscita (per alimentare l’apparecchio) – 1 cavo massimo, 3 x 2,5 mm² – massimo 3 cavi – intercambiabilità delle prese per fusibili
Codice 324010
Nome TB-1
Volume unitario 0.002 m³
Numero di prese per fusibili
1
Classe di isolamento
II
Tensione nominale di isolamento
500 V
Tensione nominale di tenuta ad impulso
Corrente nominale
6 kV
80 A
Peso netto 0.71 kg
DIRETTIVE: 2014/35/EU (OJ L 96, 29.03.2014, p.357), 2011/65/EU RoHS (OJ L 174, 01.07.2011, p.88) NORME: PN-EN 60529: 2003, PN-EN 50102: 2001, PN-EN 61439-1: 2011, PN-EN 61439-2: 2011
Data di aggiornamento: 23-10-2024
Zaklad Produkcji Sprztu Owietleniowego ,,ROSA” Sp. z o.o. 43-109 Tychy, ul. Strefowa 1 tel. +48 32 73 88 901
www.rosa.pl
TB-1
Data di aggiornamento: 23-10-2024
Zaklad Produkcji Sprztu Owietleniowego ,,ROSA” Sp. z o.o. 43-109 Tychy, ul. Strefowa 1 tel. +48 32 73 88 901
www.rosa.pl
Documents / Resources
 |
ROSA TB-1 Input Panel Lighting [pdf] Owner's Manual 324010, TB-1 Input Panel Lighting, TB-1, Input Panel Lighting, Panel Lighting, Lighting |