ROLINE 26.11.0351 Cat.6 Class E 19 Patch Panel Instruction Manual
Installation Instruction
- Load down the screws and open the metal cover.
- Strip approximately 50mm from the cable jacket, fold back the foil or braid shield, and separate the wire into 4 pairs each
- Follow the direction on the color-coding sticker to position T568A or T568B wiring, separate a little space on proper position and insert the wire pair by pair into each slot.
- Press foil or braid shield to contact ground, and keep the cable straight.
- Fasten the screws through metal case to hold tightly down for two cable jackets in the same time.
- Place the metal cover onto the bottom case and fasten the screws
- Then complete the installation.
Documents / Resources
 |
ROLINE 26.11.0351 Cat.6 Class E 19 Patch Panel [pdf] Instruction Manual 26.11.0351, 26.11.0361, 26.11.0351 Cat.6 Class E 19 Patch Panel, Cat.6 Class E 19 Patch Panel, E 19 Patch Panel, Patch Panel |
