Contents
hide
RoHS EmSMK-i2403 SMARC R2.0 CPU Module
Quick Installation Guide
Technical Support
If you have any technical difficulties, please consult the user’s manual first at: http://www.arbor-technology.com
Please do not hesitate to call or e-mail our customer service when you still can not find out the answer.
http://www.arbor-technology.com
E-mail: info@arbor.com.tw
Declaration of Conformity
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Packing List
Before starting with the installation, make sure the following items are shipped:
- 1 x EmSMK-i2403 SMARC CPU Module
- 1 x Quick Installation Guide
Ordering Information
| EmSMK-i2403-E3950- 8GB | Intel® Atom™ Processor x7-E3950 SMARC R2.0 CPU module w/ 8GB memory down, -20 ~85°C |
| EmSMK-i2403-E3940- 8GB | Intel® Atom™ Processor x5-E3940 SMARC R2.0 CPU module w/ 8GB memory down, -20 ~85°C |
| EmSMK-i2403-E3930- 8GB | Intel® Atom™ Processor x5-E3930 SMARC R2.0 CPU module w/ 8GB memory down, -20 ~85°C |
Optional Accessories
| PBS-9015 | SMARC R2.0 Carrier Board |
| HS-2403-F1 | Heat spreader |
|
CBK-02-9015-00 |
Cable kit:
1 x COM Cable 1 x SATA Cable |
Specifications
| Form Factor | SMARC CPU Module |
|
CPU |
Soldered onboard Intel® Atom™ x7-E3950 1.6GHz Atom™ x5-E3940 1.6GHz Atom™ x5-E3930 1.3GHz Processor |
| Memory | Soldered onboard 8GB LPDDR4 SDRAM |
| BIOS | AMI BIOS |
| Watchdog Timer | 1~255 levels reset |
| USB | 6 x USB 2.0 ports
2 x USB 3.0 ports |
| Expansion | 4 x PCIex1 lanes, SDIO, I2S, I2C, SMBus |
| GPIO | 8-bit Programmable |
| Serial Port | 4 x UART ports
(2 x HSUART, 2 x UART ) |
| Storage | 1 x Serial ATA port
Soldered onboard eMMC (OEM request) |
| Ethernet | 1 x Intel i210IT PCIe controller |
| Audio | HD Audio Link |
| Graphics Chipset | SoC integrated Intel Gen9 graphic |
| Graphics Interface | 1 x eDP, 1 x DP++, 1 x HDMI port |
| MIPI-CSI | 1 x MIPI-CSIx4 & 1 x MIPI-CSIx2 (OEM request) |
| OS Support | Windows 10
Linux |
| Power Requirement | +3~5.25V power input |
| Power Consumption | 0.71A@5.25V
(X7-E3950 typical CPU module only) |
| Operating Temp. | -20 ~ 85ºC (-4 ~ 185ºF) |
| Operating Humidity | 10 ~ 95% @ 85ºC (non-condensing) |
| Dimension (L x W) | 82 x 50 mm |
Driver Installation
The CPU module supports Windows 10. To install the drivers, please visit our web-site at www.arbor-technology.com and download the driver pack from the Down-load Center page. If you need login access, please contact your local ARBOR sales representative.
Board Dimensions
Heat Spreader Installation
To install the heat spreader:
See the illustration below. Mount the heat spreader to the board. Fix the heat spreader in place with fours screws.
Connector Pin Assignment
| P-Pin | Primary (Top) Side | S-Pin | Secondary (Bottom) Side | P-Pin | Primary (Top) Side | S-Pin | Secondary (Bottom) Side | ||
| P1 | SMB_ ALERT_1V8# | S1 | CAM1_SCL | P31 | NC | S31 | NC | ||
| P32 | GND6 | S32 | PCIE_D_RX+ | ||||||
| P2 | GND1 | S2 | CAM1_SDA | ||||||
| P33 | SDIO_WP | S33 | PCIE_D_RX- | ||||||
| P3 | CSI1_CK+ | S3 | GND25 | ||||||
| P34 | SDIO_CMD | S34 | GND30 | ||||||
| P4 | CSI1_CK- | S4 | RSVD5 | ||||||
| P35 | SDIO_CD# | S35 | USB4+ | ||||||
| P5 | NC | S5 | CAM0_SCL | ||||||
| P36 | SDIO_CK | S36 | USB4- | ||||||
| P6 | GBE0_SDP | S6 | CAM_MCK | ||||||
| P37 | SDIO_PWR_EN | S37 | USB3_VBUS_DET | ||||||
| P7 | CSI1_RX0+ | S7 | CAM0_SDA | ||||||
| P38 | GND7 | S38 | AUDIO_MCK | ||||||
| P8 | CSI1_RX0- | S8 | CSI0_CK+ | ||||||
| P39 | SDIO_D0 | S39 | I2S0_LRCK | ||||||
| P9 | GND2 | S9 | CSI0_CK- | ||||||
| P40 | SDIO_D1 | S40 | I2S0_SDOUT | ||||||
| P10 | CSI1_RX1+ | S10 | GND26 | ||||||
| P41 | SDIO_D2 | S41 | I2S0_SDIN | ||||||
| P11 | CSI1_RX1- | S11 | CSI0_RX0+ | ||||||
| P42 | SDIO_D3 | S42 | I2S0_CK | ||||||
| P12 | GND3 | S12 | CSI0_RX0- | ||||||
| P43 | SPI0_CS0# | S43 | ESPI_ALERT0# | ||||||
| P13 | CSI1_RX2+ | S13 | GND27 | ||||||
| P44 | SPI0_CK | S44 | ESPI_ALERT1# | ||||||
| P14 | CSI1_RX2- | S14 | CSI0_RX1+ | ||||||
| P45 | SPI0_DIN | S45 | NC | ||||||
| P15 | GND4 | S15 | CSI0_RX1- | ||||||
| P46 | SPI0_DO | S46 | NC | ||||||
| P16 | CSI1_RX3+ | S16 | GND28 | ||||||
| P47 | GND8 | S47 | GND31 | ||||||
| P17 | CSI1_RX3- | S17 | NC | ||||||
| P48 | SATA_TX+ | S48 | I2C_GP_CK | ||||||
| P18 | GND5 | S18 | NC | ||||||
| P49 | SATA_TX- | S49 | I2C_GP_DAT | ||||||
| P19 | GBE_MDI3- | S19 | NC | ||||||
| P50 | GND9 | S50 | HDA_SYNC | ||||||
| P20 | GBE_MDI3+ | S20 | NC | ||||||
| P51 | SATA_RX+ | S51 | HDA_SDO | ||||||
| P21 | GBE_LINK100# | S21 | NC | ||||||
| P52 | SATA_RX- | S52 | HDA_SDI | ||||||
| P22 | GBE_LINK1000# | S22 | NC | ||||||
| P53 | GND10 | S53 | HDA_CLK | ||||||
| P23 | GBE_MDI2- | S23 | NC | ||||||
| P54 | ESPI_CS0# | S54 | SATA_ACT# | ||||||
| P24 | GBE_MDI2+ | S24 | NC | ||||||
| P55 | ESPI_CS1# | S55 | USB5_EN_OC# | ||||||
| P25 | GBE_LINK_ACT# | S25 | GND29 | ||||||
| P56 | ESPI_CK | S56 | NC | ||||||
| P26 | GBE_MDI1- | S26 | NC | ||||||
| P57 | ESPI_IO_0 | S57 | NC | ||||||
| P27 | GBE_MDI1+ | S27 | NC | ||||||
| P58 | ESPI_IO_1 | S58 | ESPI_RESET# | ||||||
| P28 | NC | S28 | NC | ||||||
| P59 | GND11 | S59 | USB5+ | ||||||
| P29 | GBE_MDI0- | S29 | PCIE_D_TX+ | ||||||
| P60 | USB0+ | S60 | USB5- | ||||||
| P30 | GBE_MDI0+ | S30 | PCIE_D_TX- | ||||||
| P61 | USB0- | S61 | GND32 | ||||||
| P62 | USB0_EN_OC# | S62 | USB3_SSTX+ | ||||||
| P63 | USB_VBUS_DET | S63 | USB3_SSTX- | ||||||
| P-Pin | Primary (Top) Side | S-Pin | Secondary (Bottom) Side | P-Pin | Primary (Top) Side | S-Pin | Secondary (Bottom) Side | ||
| P64 | USB0_OTG_ID | S64 | GND33 | P94 | GND18 | S94 | DP0_LANE0- | ||
| P65 | USB1+ | S65 | USB3_SSRX+ | P95 | SMARC_HDMI1_ TXP1 | S95 | DP0_AUX_SEL | ||
| P66 | USB1- | S66 | USB3_SSRX- | ||||||
| P96 | SMARC_HDMI1_ TXN1 | S96 | DP0_LANE1+ | ||||||
| P67 | USB1_EN_OC# | S67 | GND34 | ||||||
| P97 | GND19 | S97 | DP0_LANE1- | ||||||
| P68 | GND12 | S68 | USB3+ | ||||||
| P98 | SMARC_HDMI1_ TXP0 | S98 | DP0_HPD | ||||||
| P69 | USB2+ | S69 | USB3- | ||||||
| P70 | USB2- | S70 | GND35 | P99 | SMARC_HDMI1_ TXN0 | S99 | DP0_LANE2+ | ||
| P71 | USB2_EN_OC# | S71 | USB2_SSTX+ | ||||||
| P100 | GND20 | S100 | DP0_LANE2- | ||||||
| P72 | RSVD1 | S72 | USB2_SSTX- | ||||||
| P101 | SMARC_HDMI1_ TXP3 | S101 | GND42 | ||||||
| P73 | NC | S73 | GND36 | ||||||
| P102 | SMARC_HDMI1_ TXN3 | S102 | DP0_LANE3+ | ||||||
| P74 | NC | S74 | USB2_SSRX+ | ||||||
| P75 | PCIE_A_RST# | S75 | USB2_SSRX- | P103 | GND21 | S103 | DP0_LANE3- | ||
| P76 | USB4_EN_OC# | S76 | PCIE_B_RST# | P104 | SMARC_DDI1_ HPDET | S104 | USB3_OTG_ID | ||
| P77 | NC | S77 | PCIE_C_RST# | ||||||
| P105 | SMARC_DDI1_ AUXP | S105 | DP0_AUX+ | ||||||
| P78 | NC | S78 | PCIE_C_RX+ | ||||||
| P106 | SMARC_DDI1_ AUXN | S106 | DP0_AUX- | ||||||
| P79 | GND13 | S79 | PCIE_C_RX- | ||||||
| P80 | PCIE_C_REFCK+ | S80 | GND37 | P107 | DDI1_DDC_AUX_ SEL | S107 | NC | ||
| P81 | PCIE_C_REFCK- | S81 | PCIE_C_TX+ | ||||||
| P108 | GPIO0 | S108 | NC | ||||||
| P82 | GND14 | S82 | PCIE_C_TX- | ||||||
| P109 | GPIO1 | S109 | NC | ||||||
| P83 | PCIE_A_REFCK+ | S83 | GND38 | ||||||
| P110 | GPIO2 | S110 | GND43 | ||||||
| P84 | PCIE_A_REFCK- | S84 | PCIE_B_REFCK+ | P111 | GPIO3 | S111 | NC | ||
| P85 | GND15 | S85 | PCIE_B_REFCK- | P112 | HDA_RST# | S112 | NC | ||
| P86 | PCIE_A_RX+ | S86 | GND39 | P113 | FAN_PWMOUT | S113 | NC | ||
| P87 | PCIE_A_RX- | S87 | PCIE_B_RX+ | P114 | FAN_TACHIN | S114 | NC | ||
| P88 | GND16 | S88 | PCIE_B_RX- | P115 | GPIO7 | S115 | NC | ||
| P89 | PCIE_A_TX+ | S89 | GND40 | P116 | GPIO8 | S116 | NC | ||
| P90 | PCIE_A_TX- | S90 | PCIE_B_TX+ | P117 | GPIO9 | S117 | NC | ||
| P91 | GND17 | S91 | PCIE_B_TX- | P118 | GPIO10 | S118 | NC | ||
| P92 | SMARC_HDMI1_ TXP2 | S92 | GND41 | P119 | GPIO11 | S119 | GND44 | ||
| P120 | GND22 | S120 | NC | ||||||
| P93 | SMARC_HDMI1_ TXN2 | S93 | DP0_LANE0+ | ||||||
| P121 | I2C_PM_CK | S121 | NC | ||||||
| P122 | I2C_PM_DAT | S122 | NC | ||||||
| P123 | BOOT_SEL0# | S123 | NC | ||||||
| P124 | BOOT_SEL1# | S124 | GND44 | ||||||
| P-Pin | Primary (Top) Side | S-Pin | Secondary (Bottom) Side |
| P125 | BOOT_SEL2# | S125 | eDP_TX0_P |
| P126 | RESET_OUT# | S126 | eDP_TX0_N |
| P127 | RESET_IN# | S127 | LCD_BKLT_EN |
| P128 | POWER_BTN# | S128 | eDP_TX1_P |
| P129 | SER0_TX | S129 | eDP_TX1_N |
| P130 | SER0_RX | S130 | GND46 |
| P131 | SER0_RTS# | S131 | eDP_TX2_P |
| P132 | SER0_CTS# | S132 | eDP_TX2_N |
| P133 | GND23 | S133 | LCD_VDD_EN |
| P134 | SER1_TX | S134 | eDP_AUX_P |
| P135 | SER1_RX | S135 | eDP_AUX_N |
| P136 | SER2_TX | S136 | GND47 |
| P137 | SER2_RX | S137 | eDP_TX3_P |
| P138 | SER2_RTS# | S138 | eDP_TX3_N |
| P139 | SER2_CTS# | S139 | NC |
| P140 | SER3_TX | S140 | NC |
| P141 | SER3_RX | S141 | LCD_BKLT_PWM |
| P142 | GND24 | S142 | NC |
| P143 | NC | S143 | GND48 |
| P144 | NC | S144 | eDP0_HPD |
| P145 | NC | S145 | WDT_TIME_OUT# |
| P146 | NC | S146 | PCIE_WAKE# |
| P147 | VDD_IN1 | S147 | VDD_RTC |
| P148 | VDD_IN2 | S148 | LID# |
| P149 | VDD_IN3 | S149 | SLEEP# |
| P150 | VDD_IN4 | S150 | VIN_PWR_BAD# |
| P151 | VDD_IN5 | S151 | CHARGING# |
| P152 | VDD_IN6 | S152 | CHARGER_ PRSNT# |
| P153 | VDD_IN7 | S153 | CARRIER_STBY# |
| P154 | VDD_IN8 | S154 | CARRIER_PWR_ON |
| P155 | VDD_IN9 | S155 | FORCE_RECOV# |
| P156 | VDD_IN10 | S156 | BATLOW# |
| S157 | TEST# | ||
| S158 | GND49 | ||
Documents / Resources
 |
RoHS EmSMK-i2403 SMARC R2.0 CPU Module [pdf] Installation Guide EmSMK-i2403 SMARC R2.0 CPU Module, EmSMK-i2403, SMARC R2.0 CPU Module, SMARC R2.0 Module, CPU Module, Module |
