rock space ZC1-A Smart Protective Film Plotter Max Instruction Manual

The Smart Protective Film Plotter ZC1 Max (V1.0) is a film-cutting machine designed to accurately cut protective films for various devices. It comes with a host unit, blade kit, power cord, and film installation accessories for precise cutting and application of protective films. The device features various components like the platen roller, lateral panel, driver, operation display, power interface, pressing bar, and blade kit clamp to ensure efficient and precise cutting operations.

Product Usage Instructions

Setting Up the Device:

Place the Smart Plotter ZC1 Max Host on a stable surface.
Connect the power cord to the power interface of the device.

Ensure all components like the blade kit, platen roller, and lateral panel are properly assembled.

Cutting Protective Film:

Load the protective film onto the device and secure it using the platen roller.
Use the driver to control the lateral movement of the Blade Kit for precise cutting.

Press the pressing bar to lift or lower the platen roller as needed during cutting.
Replace the blade when necessary for optimal cutting performance.

FAQ:

Q: How do I replace the blade on the Smart Protective Film Plotter ZC1 Max?
A: To replace the blade, follow these steps:

Unlock the blade kit clamp to release the current blade.
Carefully remove the old blade and dispose of it properly.

Insert a new blade into the blade kit and secure it by locking the blade kit clamp.

This equipment is also called a film cutting machine, a protective film-cutting machine.

Product List

Appearance And Function

Driver
Control the lateral movement of the Blade Kit
Blade Kit
Cutting protective film See details 10, 11, 12, 13

Platen Roller
Fixes protective film
Lateral Panel
Set limit of position and movement for protective film

Operation Display
Touch to control dev,ce operation
Power Switch
Starting device

Power Interface
Link power
Pressing Bar
Press to control the platen roller to lift or fall

Blade Kit Clamp
Lock the knife handle to secure the blade kit
Button
Press to replace the blade
Press to replace blade
Rotate She king Ko control the length of blade
Holder
Fixed with the blade kit clamp
Blade
Cut protective film

Notice:

Adjust blade:
Rotate the knob 11 to control the length of the blade. Lengthen the blade in the direction of the symbol “+” and shorten the blade in the direction of the symbol “-“.
Replace blade:
Press the button 10 to remove the old blade and then put in the new blade 13. The built-in magnet can absorb the blade)

Using Instructions

Install Blade Kit

Power On

Connect the power cord to the adapter and then connect the power cord to the power socket. To ensure the normal operation of the device, please use 100-240 volts of AC power; Connect the adapter to the power interface of the device; Install the blade kit on the knife holder to ensure it is fixed correctly. After connecting, press [Power Switch] to start the device.

Cut Film
When using it for the first time, you need to click [select language] to complete the language setting, then you need to click [set WIFIJ to complete the WIFI connection.

Please prepare a protective film to be cut as shown in the figure. Confirm that the protective film is flat and complete, without bending, folding, or missing layers.

Press down the pressing bar to lift the platen roller, and place the protective film in the dotted area as shown.
Slowly lift the pressing bar so that the platen roller presses the protective film.
After the system starts normally, enter the home page.

Enter keywords in the search box, search for the product model you need to cut, and select the film code of the corresponding specification according to the recommended guidelines on the screen.
After confirming the relevant information, click [OK] to start cutting the film.
After cutting, the protective film will be pushed out automatically. Take out the protective film and finish cutting.

Activate Film Code
Enter [Consumable identification code] found on the protective film package box, and then click [ADD).

Product Specification

Product Specification
Control Panel	5.5-inch color LCD capacitive screen
Network Interface	2.4G/5G Wireless LAN
Input	100-240V 1.5A 50-60Hz
Output	24V 2.7A
Power	64.8w
Size	613220174mm
Net Weight	7.1kg

Cautions

How to Install the Film

Wipe the screen with the cleaning kit;
Tear off the outer frame of the film from the tearing position at the upper right corner of the front of the film;

Place the film flatly and remove the white release film;
Remove the hole film and tear off the middle auxiliary strip; (Please fix the film with your index and middle fingers);
Place the film flatly on the screen and hole of the phone precisely and press the auxiliary strip (Be careful not to touch either end of the auxiliary strip);

Lift the upper part of the film and pull back 2cm, then push forward slowly with a scratch card from the middle of the auxiliary strip;
Then lift the lower part of the film and pull back 2cm, then push forward forcefully with a scratch card;
Use a cleaning cloth to smooth the curved surface if necessary;

Finally, uncover the surface PET film and finish installing the film.

Precautions

Press the power button to stop urgently during cutting.
Please don’t move the driver manually when powered on to avoid damage to the machine.

Please don’t touch or bump the blade against anything hard for it is sharp and fragile.
To ensure perfect cutting effect, it is suggested to replace the blade and the rubber strip every 500 times of cutting or 3 months of use.
Please shut down the machine normally through the App, and please don’t unplug the power cable directly, for it may cause irreversible damage to the machine.

If you are a user beyond China, please scan the QR code to follow us on Facebook for more information.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Renqing Excellent Technology Co., Ltd.

Documents / Resources

rock space ZC1-A Smart Protective Film Plotter Max [pdf] Instruction Manual
ZC1-A, ZC1-A Smart Protective Film Plotter Max, Smart Protective Film Plotter Max, Protective Film Plotter Max, Film Plotter Max, Plotter Max, Max

References

User Manual

rock space ZC1-A Smart Protective Film Plotter Max

Product Information