2-ZONE Digital Water Timer

MODEL : WS-5

RADDY WS-5 2-ZONE Digital Water Timer 0

USER MANUAL

PRODUCT OVERVIEW

RADDY WS-5 2-ZONE Digital Water Timer 1

  1. Filter
  2. Hose tap connection
  3. Dial
  4. + BUTTON
  5. OK BUTTON
  6. ZONE BUTTON
  7. ZONE (2) Outlet
  8. ZONE (1) Outlet
  9. Large screen
RADDY MM- 1 Battery Indicator
RADDY MM- 2 Watering
RADDY MM- 3 Rain Delay
RADDY MM- 4 Child Lock 

Now

Current Time

Next

The next watering time

SET CLOCK

Set Current Time

START TIME

Set the time of start watering

HOW LONG

Set watering duration (1minute to 5 hour 59minutes)

HOW OFTEN

Set watering frequency (1hour to 7days )

AUTO

Start automatic watering based on your programs

OFF

Turn off all watering programs and shut off the valve

ZONE

Press to select the zone you want to program
SPECIFICATION
Min/Max Operating Pressure 0.5Bar ~8bar( 7.25psi~116psi)
Working Temperature 4.5℃~45℃(40.1℉~113℉)
Power 4 x AA alkaline batteries
Don’t use rechargeable batteries 
Waterproof IP55
Rain Delay Time  1day and up to 7days

Warning NOTE:

  1. This timer is only suitable for 3/4″thread standards.
  2. Clean the filter regularly and replace it if it’s worn in order to extend the working life of timer.
  3. In winter, please remove batteries, drain and store it indoor to keep away from freezing.
  4. Do not install the timer with tools. Hand tighten ONLY. Use of tools may damage the timer.
  5. Do not subject the product to extreme force and shock.
  6. To prevent leakage, make sure that the water timer is tightly attached to the faucet and hose, add rubber washer and thread seal tape if necessary.
  7. Zone (1) and zone (2) are turned on at the same time, but the water output time is different.
  8. For outdoor use only.
PRODUCT INSTALLATION
1. INSTALLINGS THE BATTERY

1) Remove the battery cover on back of the timer.
2) Install 4 new AA (1.5V) alkaline batteries (not included).
3) Firmly reinstall the cover back into the timer.

RADDY WS-5 2-ZONE Digital Water Timer 2

Warning NOTE:

  1. Firmly restore the battery to ensure water resistance.
  2. Removed old batteries at the end of the watering season and disposed of them properly.
  3. Replace batteries when the low battery indicator appears on display.
  4. Please do not insert rechargeable batteries to avoid low voltage.
  5. The timer don’t have programmable memory, it needs to be reset once power off.
2. INSTALLING THE TIMER

1) Attach the timer to an outdoor hose faucet.
2) Please turn on the tap after programming the timer.

AUTOMATIC WATERING PROGRAM SETTING
1. SET CLOCK
  1. Turn dial to SET CLOCK
  2. Press the “RADDY MM- 6 RADDY MM- 7” to set the current hour and mintues.
  3. Using the RADDY MM- 5 button to switch between hours and minutes.
  4. Turn dial to save changes.

RADDY WS-5 2-ZONE Digital Water Timer 3

TIPS:

  • Hold the“ RADDY MM- 6 or RADDY MM- 7 ” button can change the time quickly.
  • At the end of setting, please turn dial to save changes. If you press “OK” at the end, it will go back to the previous step.
2. SET START TIME
  1. Turn dial to START TIME
  2. Press the RADDY MM- 8 to switch the zone (1) and zone (2).
  3. Press the “RADDY MM- 6 RADDY MM- 7” to set the current hour and mintues.
  4. Using the RADDY MM- 5 to switch the hours and minutes.
  5. Turn dial to save changes.

RADDY WS-5 2-ZONE Digital Water Timer 4

When the START TIME< NOW, The scheduled task will be executed the next day.

3. SET HOW LONG
  1. Turn dial to HOW LONG.
  2. Press the RADDY MM- 8to switch the zone (1) and zone (2).
  3. Press the “RADDY MM- 6 RADDY MM- 7” to set the watering duration.
  4. Using the RADDY MM- 5 to switch the hours and minutes.
  5. Turn dial to save changes.

RADDY WS-5 2-ZONE Digital Water Timer 5

RADDY MM- 9

1. When the HOW LONG= 0 minute, the scheduled task will not be executed.
2. The Watering duration is from 0 minute to 5 hours 59 minutes.

4. SET HOW OFTEN
  1. Turn dial to HOW OFTEN
  2. Press the RADDY MM- 8 to switch the zone (1) and zone (2).
  3. Press the “RADDY MM- 6 RADDY MM- 7” to set the HOURS and DAYS.
  4. Turn dial to save changes.

You can choose to water from every 1 to 23hours, or 1 to 7days

RADDY WS-5 2-ZONE Digital Water Timer 6

Examples of watering frequencies are every 1 day, every 2 days and every 3 days:

Every 1 day
RADDY WS-5 2-ZONE Digital Water Timer 7
Every 2 day
RADDY WS-5 2-ZONE Digital Water Timer 8
Every 3 day
RADDY WS-5 2-ZONE Digital Water Timer 9

5. AUTO

Turn dial to AUTO, the watering plan will be automatically executed.
It will display the current day and time, and followed with the next watering plan.

RADDY WS-5 2-ZONE Digital Water Timer 10

RADDY MM- 9

When the HOW LONG= 0 minute, the NEXT will display OFF

6. OFF

Turn dial to OFF, the screen shows OFF and the battery level.

All program are saved and the timer stop working.

RADDY WS-5 2-ZONE Digital Water Timer 11

ADDITIONAL FEATURES
MANUAL WATERING

Please make sure the timer is at Auto.

  1. Press the “RADDY MM- 5” and press “RADDY MM- 6 RADDY MM- 7” to select watering duration from 0 min to 59 mins.
  2. Press the RADDY MM- 8 to switch the zone (1) and zone (2).
  3. Press “RADDY MM- 5” button , it will start to watering.
  4. When you press the “RADDY MM- 5” button again, the manual watering task ends even if it is watering and the timer will switch back to Auto mode.

RADDY WS-5 2-ZONE Digital Water Timer 12

Zone (1) only: Set the zone ② = 0 minute.
Zone (2) only: Set the zone ① = 0 minute.

RAIN DELAY

Please make sure the timer is at Auto.

  1. Hold and press “RADDY MM- 6” button 5s until the “RADDY MM- 3” appears on the screen.
  2. Press “RADDY MM- 6 RADDY MM- 7” button to set the duration of the delay from 0 to 7 days.
  3. Press “RADDY MM- 5” button to save changes.
  4. To quit the Rain delay, press “RADDY MM- 6” 5s again.

RADDY WS-5 2-ZONE Digital Water Timer 13

CHILD LOCK

Please make sure the timer is at Auto.
Hold and press “RADDY MM- 7” button 5s until the “RADDY MM- 4” appears on the screen. If you want to cancel the “RADDY MM- 10“, press “RADDY MM- 7” button 5s again.

RADDY WS-5 2-ZONE Digital Water Timer 14

BATTERY STATUS

Battery status will be displayed as following:

RADDY MM- 1 - a               RADDY MM- 11
FULL                 LOW BATTERY

Note: When the low battery indicator appears on display, the valve will close automatically to avoid leakage. Please replace the battery in time in case of interrupting the normal operation.

TROUBLESHOOTING
Problem Possible Cause Possible Solution
Leakage 1. No silicone gasket installed
2. The faucet is not the standard 3/4″ thread.
1. Add silicone gasket
2. Make sure the faucet is a 3 /4″ faucet.
3. Wrap with teflon tape.
The water won’t stop / flow out 1. Long time storage and transportation make the valve inactive.
2. Valve blockage
Step1. Keep the tap turned off and turn the timer dial to AUTO.
Step2. Run the manual watering function or 5-7s and stop it.
Step3. Repeat the Step 2 for 3 to 5 times.
Step4. Try to use it normally.
Short battery life 1. Mixed use of old and new batteries.
2. Used the carbon batteries or rechargeable batteries.
Use new alkaline batteries
Low water pressure 1. Filter blockage.
2. Inlet pressure not sufficient to support watering needs.
1. Check if the filter is clogged, clean or replace the filter.
2. Make sure the timer is installed properly and the thread is 3/4″.
3. Installation of a booster pump or other auxiliary equipment of increasing water pressure.
No response for manual/rain delay function After seting manual watering or rain delay time , without pressing OK button to save and run. Press OK button again after the time confirmed.

Documents / Resources

RADDY WS-5 2-ZONE Digital Water Timer [pdf] User Manual
WS-5, WS-5 2-ZONE Digital Water Timer, 2-ZONE Digital Water Timer, Digital Water Timer, Water Timer, Timer

References

Leave a comment

Your email address will not be published. Required fields are marked *