User Manual for RADDY models including: WS-5, WS-5 2-ZONE Digital Water Timer, 2-ZONE Digital Water Timer, Digital Water Timer, Water Timer, Timer
download – Raddy
3) Firmly reinstall the cover back into the timer. NOTE: Page 5. AUTOMATIC WATERING PROGRAM SETTING. 1. SET CLOCK. TIPS: · Hold the“ or ” button can change the ...
2-ZONE Digital Water Timer MODEL : WS-5 USER MANUAL PRODUCT OVERVIEW SET CLOCK START TIME HOW LONG HOW OFTEN AUTO OFF ZONE Battery Indicator Watering Rain Delay Child Lock Current Time The next watering time Set Current Time Set the time of start watering Set watering duration (1minute to 5 hour 59minutes Set watering frequency (1hour to 7days Start automatic watering based on your programs Turn off all watering programs and shut off the valve Press to select the zone you want to program SPECIFICATION Min/Max Operating Pressure Working Temperature Power Waterproof Rain Delay Time 0.5Bar ~8bar( 7.25psi~116psi) 4.5~45(40.1~113) 4 x AA alkaline batteries Don't use rechargeable batteries IP55 1day and up to 7days NOTE: 1. This timer is only suitable for 3/4"thread standards. 2. Clean the filter regularly and replace it if it's worn in order to extend the working life of timer. 3. In winter, please remove batteries, drain and store it indoor to keep away from freezing. 4. Do not install the timer with tools. Hand tighten ONLY. Use of tools may damage the timer. 5. Do not subject the product to extreme force and shock. 6. To prevent leakage, make sure that the water timer is tightly attached to the faucet and hose, add rubber washer and thread seal tape if necessary. 7. Zone and zone are turned on at the same time, but the water output time is different. 8. For outdoor use only. PRODUCT INSTALLATION 1. INSTALLINGS THE BATTERY 1) Remove the battery cover on back of the timer. 2) Install 4 new AA (1.5V) alkaline batteries (not included). 3) Firmly reinstall the cover back into the timer. NOTE: 1. Firmly restore the battery to ensure water resistance. 2. Removed old batteries at the end of the watering season and disposed of them properly. 3. Replace batteries when the low battery indicator appears on display. 4. Please do not insert rechargeable batteries to avoid low voltage. 5. The timer don't have programmable memory, it needs to be reset once power off. 2. INSTALLING THE TIMER 1) Attach the timer to an outdoor hose faucet. 2) Please turn on the tap after programming the timer. AUTOMATIC WATERING PROGRAM SETTING 1. SET CLOCK 1. Turn dial to SET CLOCK 2. Press the " " to set the current hour and mintues. 3. Using the button to switch between hours and minutes. 4. Turn dial to save changes. TIPS: · Hold the" or " button can change the time quickly. · At the end of setting, please turn dial to save changes. If you press"OK" at the end, it will go back to the previous step. 2. SET START TIME 1. Turn dial to START TIME 2. Press the to switch the zoneæ and zoneç 3. Press the " " to set the current hour and mintues. 4. Using the to switch the hours and minutes. 5. Turn dial to save changes. When the START TIME NOW The scheduled task will be executed the next day 3. SET HOW LONG 1. Turn dial to HOW LONG. 2. Press the to switch the zoneæ and zoneç 3. Press the " " to set the watering duration. 4. Using the to switch the hours and minutes. 5. Turn dial to save changes. 1. When the HOW LONG= 0 minute, the scheduled task will not be executed. 2. The Watering duration is from 0 minute to 5 hours 59 minutes. 4. SET HOW OFTEN 1. Turn dial to HOW OFTEN 2. Press the to switch the zoneæ and zoneç 3. Press the " " to set the HOURS and DAYS. 4. Turn dial to save changes. You can choose to water from every 1 to 23hours, or 1 to 7days Examples of watering frequencies are every 1 day, every 2 days and every 3 days: Every 1 day Mon Tue Wed Thu Fri Sat Sun Every 2 day Mon Tue Wed Thu Fri Sat Sun Every 3 day Mon Tue Wed Thu Fri Sat Sun 5. AUTO Turn dial to AUTO, the watering plan will be automatically executed. It will display the current day and time, and followed with the next watering plan. When the HOW LONG= 0 minute, the NEXT will display OFF 6. OFF Turn dial to OFF, the screen shows OFF and the battery level. All program are saved and the timer stop working. ADDITIONAL FEATURES MANUAL WATERING Please make sure the timer is at Auto. 1. Press the " " and press " " to select watering duration from 0 min to 59 mins. 2. Press the to switch the zoneæ and zoneç 3. Press " " button it will start to watering. 4. When you press the " " button again, the manual watering task ends even if it is watering and the timer will switch back to Auto mode. Zoneæ only: Set the zone ç = 0 minute. Zoneçonly: Set the zone æ = 0 minute. RAIN DELAY Please make sure the timer is at Auto. 1. Hold and press " " button 5s until the" " appears on the screen. 2. Press " " button to set the duration of the delay from 0 to 7 days. 3. Press " " button to save changes. 4. To quit the Rain delay, press" "5s again. CHILD LOCK Please make sure the timer is at Auto . Hold and press " " button 5s until the " " appears on the screen. If you want to cancel the " ", press " " button 5s again. BATTERY STATUS Battery status will be displayed as following: FULL LOW BATTERY Note: When the low battery indicator appears on display, the valve will close automatically to avoid leakage. Please replace the battery in time in case of interrupting the normal operation. TROUBLESHOOTINGAdobe PDF library 15.00