QUIN G100Pro Portable Printer User Guide

QUIN G100Pro Portable Printer

Product Introduction

 Packing List

Printer Parts Instruction

• To ensure better printing results, make sure to close the top cover tightly.
• If paper jam occurs, you can open the top cover by pushing up the “” symbols on both sides and remove the jammed paper.

Getting Started

Downloading the App

1. Method I: Search for the “Phomemo” app on App Store@ or Google PlayTM for download and installation.
2. Method 2: Scan the QR code. You can scan the code using your cell phone’s camera, the built-in QR code scanning feature of your browser, or a dedicated scanning app.

As the Safari browser on Apple devices does not support QR code scanning, please use your device’s built-in QR code scanner instead.

Paper Installation Guide

1. Long press the Power Button for 3 seconds until the Indicator Light is green to power up the printer.
2. Double-click the power button to remove the printer protective paper. Due to different models, your printer may not contain the disposable protective paper. If so, please skip this step.
3. Insert the paper with the text side up into the Paper Entry Slot until the printer automatically pulls it in and the Indicator Light is lit green, signaling paper insertion is complete.

The printed content will not appear on the side that reads “non-printing side”. The printer does not support printing while charging.

 User Guide: Printing via Mobile App

1. Open the “Phomemo” app.
2. Grant permissions.
   For more information about app permissions, see 3.3 Permission Description in the Online Guide.
3. Wait for the printer to be searched.
4. Tap [Connect Now].
5. The printer supports Bluetooth or WiFi connection. Please select the connection method.
   1. Method 1 : Select Bluetooth connection.
   2. Method 2: Select the WiFi network to connect to and enter the password.
6. Connection successful, click on
7. Select the image to be printed.In this example, printing an image is used, but you can select other tex for printing based on your actual needs.
8. Edit your first image, and tap  after you finish editing.
9. Confirm the preview of the image, and tap [Print].

The software interface is for reference only. Please refer to the actual operating page for accurate information.

Additional Instructions

 Button Instructions

Indicator Light Instructions

Accessing Detailed Online Guide

Visit g100pro.phomemo.com to access the Detailed Online Guide, video tutorials, and answers to FAQs.

Warranty Card

• Exchange
• Return
  

 Information to User

 FCC INFORMATION (U.S.A.)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction

ISED NOTICE (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:

IC RF exposure statement:
The device has been evaluated to meet general IC RF exposure requirement. The device can be used in portable exposure condition without restriction.

 SAR statement
The FCC/lC’s SAR limit is 1.6 W/kg, with a maximum SAR value of 1.12 W/kg when testing the device for use on the body. The device was tested at 0 mm and meets RF exposure requirements.

Special Notes
The company assumes full responsibility for the revision and explanation of this manual, exercising utmost diligence to guarantee its accuracy. Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, the actual product may vary slightly from the images. Please refer to the physical product for accurate representations.

FAQ

• Q: Can I print while the printer is charging?
  A: No, the printer does not support printing while charging. Ensure the printer has sufficient battery before initiating a print job.
• Q: How do I check the battery level of the printer?
  A: Refer to the printer’s user manual or the connected device’s app to check the battery level of the G100Pro portable printer.
• Q: What should I do if the printer encounters connectivity issues?
  A: Restart both the printer and the connected device, ensure they are within range, and attempt to reconnect via Bluetooth or the designated connectivity method.