Quin A646 Label Printer User Guide

Quin A646 Label Printer User Guide

01 Pro Tips

• Each time you change the label, please run the automatic label identification.
• Press the feed button on the printer to skip a blank label.
• Double click the feed button.
• Avoid poor quality labels as they can damage the printer.
• Regularly clean the print head.
• If the pa per is jam med and the blue light is flashing slowly, run the automatic label identification.
• Insert Label Printer into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating system.

02. FAQ

Please visit our official website to check FAQ file.

03. LED STATUS LIGHT

04. FEED BUTTON

05. Specifications

06. Safety Notices

• The print head may be very hot after printing labels. Do not touch the print head.
• Do not bend the power cord excessively or place objects on the cord.
• Do not use the printer if you find any irregularities as these could result in fire or electric shock.
• Keep the printer out of reach of children.
• Use only approved accessories and do not try to disassemble, repair the unit by yourself.
• Keep the printer away from water and other objects that could penetrate the components.
• Please unplug the printer when it is not in use for a long time.

ISED Warning statement:

This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISED RF exposure statement:

This equipment complies with ISED Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with a minimum distance of20cm between the product and your body.

07 FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body.

Read More About This Manual & Download PDF: