QUIN D680BT Label Maker Installation Guide

QUIN D680BT Label Maker

Product Introduction

Packing List

Printer Parts
Diagram of Tape Compartment with Open Cover

Button Function Description

1. Power Button
2. Home Button
3. Clear Button
4. Esc Button
5. 0K Button
6. FN Button
7. Print Preview Button
8. Print Button
9. BS Button
10. Enter Button
11. Tab Button
12. Caps Button
13. Shift Button
14. Bluetooth Button
15. Barcode Button
16. Symbol Button
17. Space Button
18. Accent Button
19. Serialize Button

Preparation Before Use

Software Installation

Mobile Download

• Method 1: Search for the “Print Master” app on App Store or Google PlayTM for download and installation.
• Method 2: Scan the QR code. You can scan the code using your cell phone’s camera, the built-in QR code scanning feature of your browser, or a dedicated scanning app.

As the Safari browser on Apple devices does not support QR code scanning, please use your device’s built-in QR code scanner instead.

PC Download

• Method 1: Search for “Labelife” on the Mac App Store or Microsoft Store. Download and install it.
• Method 2: Visit the website labelife.cc to download “Labelife”.

Installation of Label Tape

1. Open the Top Cover of the Label Maker
2. Take out a new label tape.
   Please skip this step if there is no brand new label tape (boxed) separately purchased.
3. Remove the blue card from the new label tape.
4. Ensure the end of the label tape passes through Tape Guide 1) and Tape Guide 2
5. Insert the label tape into the Tape Compartment. Two clicks indicate it is securely installed.
6. Extend the label paper out above the Paper Outlet and then close the Top Cover.

Getting Started

Keyboard Printing

• Power On
• Input Content

• Single Click to Print
• Cut Label
• Peel off the liner along the easy tear line on the back of the label.
• Stick the label onto a dry, flat surface.

Mobile Device Printing

1. Press the Bluetooth Button to turn it on, the blue light will flash.
2. Open the “Print Master” app.
3. Grant permissions.
4. Click [Auto Connect].
5. Search for the printer.
6. The printer is now connected.
7. Click [Print] after editing your first label.
8. Printing is completed

PC Device Printing

1. Open Labelife.
2. Turn on the printer and ensure Bluetooth is enabled on your computer. Then click [Connect to the printer] on Labelife.
3. Click[add printer].
4. Click [Wireless connection] and then click [Next].
5. Click on the printer to connect automatically.
6. The printer is connected.
7. Click [New] to enter the editing page. Enter text and then click [Print].

Function Introduction

1. Time Stamp
2. Tape Width
3. Alignment Setting

Cleaning Instructions
In case of blank prints, blurry text, and missing prints, please try cleaning the printer.

• Please avoid scraping the Print Head with any hard objects, as it may damage the Print Head and
  compromise print quality.

For details on installing the label tape, please refer to Chapter 2 Preparation Before Use Section 2.2 Installation of Label Tape in this guide.

1. Before cleaning, ensure the printer is powered off and the label tape is removed. If you have just finished printing, wait for at least 30 minutes for the Print Head to cool down completely.
2. Use a cotton swab dipped in alcohol or a dedicated print head cleaning pen (requires separate purchase) to gently wipe the surface of the Print Head about 5 times, removing dust and stains.
3. Wait 5-10 minutes for the alcohol to fully evaporate before using it again.

FCC Warning statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Accessing Detailed Online Guide

ISED Warning

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF exposure statement:
The device has been evaluated to meet general IC RF exposure requirement. The device can be used in portable exposure condition without restriction.

1. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
2. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas
3. The battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
4. Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
5. Battery cannot be subjected to extremely high or low temperatures, low air pressure at high altitude during use, storage or transportation.

Warranty Card

• Exchange
• Return

FAQS

Q1: Does the QUIN D680BT label maker support Bluetooth connectivity?
A: Yes, the QUIN D680BT comes with Bluetooth functionality, allowing wireless connection to smartphones or tablets via a compatible app for easy label creation.

Q2: What type of label tape does the QUIN D680BT use?
A: The QUIN D680BT supports thermal label tapes, typically available in widths like 12mm, 15mm, or 18mm, depending on the model’s specifications. No ink or toner is required.

Q3: Is the QUIN D680BT compatible with both iOS and Android devices?
A: Yes, the label maker is compatible with both iOS and Android platforms. You can download the official app from the App Store or Google Play for full functionality.