Quin D450BTZ Label Printer User Guide

Quin D450BTZ Label Printer

Product Usage Instructions

Installation

1. Place the equipment on a stable surface with proper ventilation.
2. Ensure there is a minimum distance of 20cm between the radiator and your body during installation.
3. Connect the necessary power and data cables as per the user manual.

Operation

1. Power on the equipment using the designated power button.
2. Follow the on-screen instructions for initial setup and configuration.
3. Ensure that the equipment is operated with the recommended distance maintained between the radiator and your body.

INSTRUCTIONS FOR USE

Pro Tips

• Each time you change the label, please run the automatic label identification.
• Press the feed button on the printer to skip a blank
• Double click the feed button.
• Avoid poor quality labels as they can damage the printer.
• Regularly clean the print head.
• If the paper is jammed and the blue light is flashing slowly, run the automatic label identification.
• Insert Label Printer into the same USB port on your computer every time. This will avoid creating duplicate copies of the printer in your operating system.

LED STATUS LIGHT

FEED BUTTON

Specifications

INSTRCUTIONS FOR USE

Safety Notices

• The print head may be very hot after printing labels. Do not touch the print head.
• Do not bend the power cord excessively or place objects on the cord.
• Do not use the printer if you find any irregularities as these could result in fire or electric shock.
• Keep the printer out of reach of children.
• Use only approved accessories and do not try to disassemble, repair the unit by yourself.
• Keep the printer away from water and other objects that could penetrate the components.
• Please unplug the printer when it is not in use for a long time.

Warranty Card

• Return
• Exchange
• Repair

ISED Warning statement
This device contains licence-exempt transmitter(s)/ receiver(s) that com ply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s),

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 1 S of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment, This generates, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his expense,

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Frequently Asked Questions