QUIN A88U Portable Printer User Guide

QUIN A88U Portable Printer

Product Introduction

PACKING LISR

Printer Parts Instruction

© Ten apaberter octure, sulta, push sue elue the fier jammed paper.

Getting Started

Downloading the App

Method 1: Search for the “Phomemo” app on App Store® or Google Play™ for download and installation.

Method 2: Scan the QR code.
You can scan the code using your cell phone’s camera, the built-in QR code scanning feature of your browser, or a dedicated scanning app.

As the Safari browser on Apple devices does not support QR code scanning, please use your device’s built-in QR code scanner instead.

Tattoo Transfer Paper Introduction

This area is the adhesive seam at the top of the paper; please do not tear it!

Preparation Before Use

1. Take out a piece of tattoo transfer paper, and remove its Protective Sheet.
2. Trim the Yellow Backing Sheet along the top adhesive seam with a ruler or scissors.

When cutting, please make sure that the adhesive area remains intact.

Paper Installation Guide

1. Long press the Power Button for 3 seconds until the Indicator Light is green to power up the printer.
2. Double-click the power button to remove the printer protective paper.
3. Due to different models, your printer may not contain the disposable protective paper. If so,please skip this step.
   Place the white tracing paper facing up and insert it flat into the paper slot until the printer automatically feeds the paper. The status indicator light will blink slowly in green, indicating that the paper is loaded.

® The printed content will not appear on the side that reads “non-printing side”.

User Guide: Printing via Mobile App

1. Open the “Phomemo” app.
2. Grant permissions.
   For more information about app permissions, see 3.3 Permission Description in the Online Guide.
3. Wait for the printer to be searched.
4. Tap [Connect Now].
5. Connection successful, click on [Print Image].
6. Select the image to be printed.
7. Edit your first image, and tap after you finish editing.
8. Confirm the preview of the image,and tap [Print].
9. Tear off the White Tracing Sheet for use.

The software interface is for reference only. Please refer to the actual operating page for accurate information.

Additional Instructions

Button Instructions

Indicator Light Instructions

Accessing Detailed Online Guide

Visit a88u.labelife.cc to access the Detailed Online Guide, video tutorials,and answers to FAQs.

Information to User

FCC INFORMATION (U.S.A.)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

The device has been evaluated to meet general RF exposure statement.
The device can be used in portable exposure condition without restriction

ISED NOTICE (Canada)

This device contains licence-exempt transmitters)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF exposure statement:
The device has been evaluated to meet general IC RF exposure requirement.
The device can be used in portable exposure condition without restriction.

WARING

Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery.
This product is not a toy.

Warning: Operation of this equipment in a residential environment could cause radio interterence.

Special Notes
The company assumes full responsibility for the revision and explanation of this manual, exercising utmost diligence to guarantee its accuracy.

Nevertheless,please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, the actual product may vary slightly from the images. Please refer to the physical product for accurate representations.