Schelinger SF-2P-4P-063 Modular Changeover Switch
Installation
Dimension
Specification
- Rated voltage, and frequency.
- Switching current.
- Rated insulation voltage.
- Rated surge voltage.
- Category of use.
- Protection degree.
- Contamination degree.
- Caution, risk of electric shock.
- For internal use.
- Working temperature.
Security
- Before mounting, read the instructions and disconnect the power supply. Installation should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. Modifications to the product may cause threat and loss of warranty.
- Use protection against frost when working below 0 ° C. The function check should be performed once per month by pressing the TEST button.
- Disconnecting the circuit means the correct operation of the device.
Maintenance
- All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product.
- Use dry and delicate materials for cleaning. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness/humidity, water, explosive zones, vibrations, and chemical fumes.
Disposal
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with Your Local Authority or retailer for recycling advice.
Bemko Sp. z o.o.
- ul. Bocznicowa 13 05-850 Jawczyce
- www.schelinger.eu.
Documents / Resources
![]() |
Schelinger SF-2P-4P-063 Modular Changeover Switch [pdf] Instruction Manual SF-2P-4P-063, SF-2P-4P-063 Modular Changeover Switch, Modular Changeover Switch, Changeover Switch, Switch |