How do I set the auto-off time and calibrate the My Weigh Palmscale 8-300?
To address your issues with the My Weigh Palmscale 8-300, please follow these instructions from the manual: Auto Power Off Settings In normal weighing…
Manuals+ Q&A
Scale questions & answers
Browse answered questions about Scale, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I change the measurement unit from kg to lb on the Ankor Health Mini Scale?
To change the measurement unit from kg to lb on your Ankor Health Mini Scale, please follow these steps: Locate the unit conversion switch.…
What type of USB charger is required for the himaly IF1011AR Bluetooth Body Fat Scale?
For the himaly IF1011AR Bluetooth Body Fat Scale (if your specific model includes a built-in rechargeable battery), the manual specifies the following charger requirements:…
How do I view historical weight data and compare measurements in the Insmart Health app?
To view your historical weight data and compare measurements in the Insmart Health app, follow these general steps based on the app's interface: Check…
How do I change the units of measurement displayed on the scale itself?
To change the units of measurement on the RENPHO ES-CS20M Body Fat Scale, you can use one of the following methods: Using the Unit…
How can multiple users connect to the scale?
The Powerology P8EBSCALE Advanced Precision Smart Scale supports multiple users. Here is how you can manage this: Binding Multiple Users: The scale supports binding…
Is it safe to use the FITINDEX ES-26M scale with a hip replacement, and why did I receive a warning message about joint replacements?
The FITINDEX ES-26M uses Bioelectrical Impedance Analysis (BIA), which sends a small, safe electrical current through the body to measure body fat and other…
How do I fix inaccurate weight measurements on my INSMART FG260 scale?
To resolve inaccurate weight measurements or underrecording on your INSMART scale, please follow these troubleshooting steps from the user guide: Surface: Ensure the scale…
Why is my INSMART scale showing half my actual weight and how do I fix it?
If your INSMART scale is showing approximately half of your expected weight, it is likely due to an incorrect unit setting (such as kg…
How do I change the weight unit from stones to pounds on the Taylor 5721F scale?
To change the unit of measurement on your Taylor 5721F scale, look for a small button on the underside (bottom) of the scale. While…
What does the error code errH mean on the Salter 9113 Digital Glass Analyser Scale?
While the specific code errH is not explicitly listed in the standard manual for the Salter 9113, it is likely a variation of the…
Can the INSMART Bluetooth Body Fat Scale be used for basic weighing without the app?
Yes, you can use the INSMART Bluetooth Body Fat Scale for basic weighing without using the app. It functions as a standard digital scale…
How do I fix the FFF.FFF error on the display of my Mastercool 98210-BL scale?
While the manual for the Mastercool 98210-BL does not explicitly list an error code labeled "FFF.FFF," this type of display often indicates a system…
How can I connect to the INSMART Bluetooth Body Fat Scale for development purposes, and why is it not appearing under the standard Weight Scale Service UUID (0x181D)?
The INSMART Bluetooth Body Fat Scale is designed to work specifically with the Insmart Health app. While you are attempting to use the standard…
How do I set up and use the Taylor 5721F Body Composition Scale?
Setting up the Taylor 5721F can be broken down into a few simple steps to make it less overwhelming. Follow this guide to get…
How do I resolve the OUE2 error code and calibrate my Normann ASK-266 kitchen scale?
Based on the manual for the Normann ASK-266, there is no specific mention of an "OUE2" error code or a user-accessible calibration procedure. However,…
Why will my Taylor 5721F scale not turn on even after installing new batteries?
If your Taylor 5721F scale will not turn on after installing new batteries, please check the following steps based on the User Guide: Verify…
How do I change the battery on the Salter 9173 Ultimate Accuracy Analyser Scale?
To change the battery on your Salter 9173 Ultimate Accuracy Analyser Scale, follow these steps: Locate the compartment: Turn the scale over to find…
Is the COSORI RS001x Smart Nutrition Scale compatible with Google Health?
The COSORI Smart Nutrition Scale (model CNS-R001S-X, often referred to as RS001x) operates through the VeSync app. While the manual does not explicitly mention…
Can I record more than one measurement per day and will the scale save both weights?
Yes, you can take multiple measurements per day. The Etekcity EFS-A591S-KUS Smart WiFi Body Fat Scale automatically syncs your data to the VeSync app,…
How do I delete measured data or reassign data to a different user on the Niceboy ION SmartScale?
Management of measured data and user profiles for the Niceboy ION SmartScale is handled through the Niceboy ION app. Based on the manual, here…
How do I input new nutritional values or codes into the Ataller KS-2088 scale?
Based on the provided manual for the Ataller KS-2088 Kitchen Food Scale, this specific model is a standard digital kitchen scale and does not…
What do the different metrics on the Fitdays app mean, such as fat loss, protein, and muscle mass?
The Fitdays app provides several body composition metrics. While the manual does not provide a detailed glossary for every term, here is how to…
How do I disable the Bluetooth/Wi-Fi search on the WW927Z scale?
Based on the instruction manual for the WW927Z Body Weight Scale, there is no specific setting or button to manually disable the wireless search…