Can I export data in CSV or TXT format from the HANMATEK DOS1104 Digital Storage Oscilloscope?
Yes, you can obtain data from the HANMATEK DOS1104 for external use, although the manual primarily describes saving waveforms and communicating with a PC…
Manuals+ Q&A
HANMATEK questions & answers
Browse answered questions about HANMATEK, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I use the HANMATEK DM20 Digital Multimeter and its various functions?
I am sorry to hear you are finding the directions difficult. To help you get started with your HANMATEK DM20, here is a simplified…
Can I get a digital manual for my HANMATEK DOS1102 Digital Storage Oscilloscope?
Yes, you can access the digital manual for the HANMATEK DOS1102 Digital Storage Oscilloscope directly on this page. You have two options for viewing…
How do I change the measurement units from feet (ft) back to meters (m) on the HANMATEK DT10/40M laser distance meter?
According to the HANMATEK DTAPE DT10/40M manual, the standard method to change units is as follows: Long press the SET key: This should cycle…
What do the numeric ranges and sensitivity levels mean on the Hanmatek AC1?
The numeric ranges on the Hanmatek AC1 refer to the device's voltage detection range and its adjustable sensitivity levels: Voltage Range (12V to 1000V…
How long does it take to fully charge the HANMATEK ES1 Rechargeable Cordless Screwdriver?
ging time for the HANMATEK ES1 Rechargeable Cordless Screwdriver may vary depending on the battery's current charge level and the power source used for…
How do I change the measurement function on the HANMATEK DM20 Digital Multimeter?
To change the measurement function on the HANMATEK DM20 Digital Multimeter, follow these steps: 1. Locate the dial on the front of the multimeter.…
How do I change the measurement units on the HANMATEK LM50 Laser Distance Meter?
To change the measurement units on the HANMATEK LM50 Laser Distance Meter, follow these steps: 1. Power on the device by pressing the power…
How do I adjust the sensitivity settings on the Hanmatek AC1 Non-Contact Voltage Tester?
To adjust the sensitivity settings on the Hanmatek AC1 Non-Contact Voltage Tester, follow these steps: 1. Power on the voltage tester by pressing the…
How do I use the non-contact voltage detection (NCV) function on the HANMATEK DM10 Pen Type Digital Multimeter?
The non-contact voltage detection (NCV) function on the HANMATEK DM10 Pen Type Digital Multimeter allows you to check for the presence of voltage without…