HANMATEK DTAPE DT10/40M Laser Distance Meter & Tape Measure User Manual

1. Introduction

The HANMATEK DTAPE DT10/40M is a versatile 2-in-1 measuring tool, combining a 40-meter laser distance meter with a 5-meter self-locking tape measure. This device is designed for accurate and efficient measurements in various applications, offering both traditional and digital measurement capabilities. It features a black and white display, multiple measurement modes, and a rechargeable lithium battery.

Figure 1: HANMATEK DTAPE DT10/40M device with charging cable.

2. Product Overview and Key Components

Familiarize yourself with the main components and controls of the DTAPE DT10/40M.

Figure 2: Labeled components of the DTAPE DT10/40M.

• Display Screen: Shows power, measurement standard, and measurement data.
• Menu Key: Short press to switch measurement mode (single distance, area, volume, Pythagorean).
• Brake Lock: Controls the tape retraction speed. Press to slow down, release to stop.
• Set Key: Short press to switch measurement reference (front or rear). Long press to change measurement units (m/ft/in).
• Measuring Key: Short press for single measurement; long press for continuous measurement.
• Laser Receiving Port: Receives the laser beam for distance calculation.
• Laser Emission Port: Emits the laser beam.
• Type-C Charging Port: For recharging the internal battery.
• ON/OFF Button: Long press to turn the device on/off. Short press to return to the previous step.
• 5m/16ft Tape Measure: Integrated tape measure with magnetic hook for attaching to metal surfaces.

3. Features

• 2-in-1 Functionality: Combines a 40-meter laser distance meter with a 5-meter self-locking tape measure, offering versatility for various measurement needs.
• High-Precision Tape Measure: Accuracy of ±1.5 mm, 19 mm wide tape, 5-meter stretch length. Features a flexible "one-button" rear cover with a magnet and a nylon-coated lining for durability.
• Accurate Digital Laser: Precision of ±2 mm. Supports unit switching between meters (m), feet (ft), and inches (in). Capable of single measurement, area measurement, volume measurement, and Pythagorean measurement. The dual-aperture design enhances measurement stability. Class II laser for field applications.
• USB Rechargeable Battery: Built-in rechargeable lithium battery provides extended life, allowing for approximately 5 hours of continuous use on a full charge. Conveniently recharges via USB.
• Power Saving Features: The laser automatically turns off after 30 seconds of inactivity. The display automatically shuts off after 180 seconds (3 minutes) of inactivity to conserve battery power.
• Controlled Tape Retraction: The tape retraction speed can be controlled via the front gate.
• Durability: The device is designed to be both waterproof and dustproof, making it suitable for various working environments.

Figure 3: The device is designed for durability in various conditions.

4. Setup

4.1 Charging the Device

The DTAPE DT10/40M comes with a built-in rechargeable lithium battery. Before first use, or when the battery indicator on the display shows low power, charge the device.

1. Locate the Type-C charging port on the side of the device.
2. Connect the provided USB Type-C cable to the device's charging port.
3. Connect the other end of the USB cable to a standard USB power adapter (e.g., phone charger, computer USB port, power bank).
4. The battery indicator on the display will show charging status. Once fully charged, disconnect the cable.

4.2 Powering On/Off

• To Power On: Long press the ON/OFF button. The display will light up.
• To Power Off: Long press the ON/OFF button again. The display will turn off.
• Automatic Shut-off: The device will automatically power off after 3 minutes of inactivity to save battery.

5. Operating Instructions

5.1 Using the Tape Measure

The integrated 5-meter tape measure functions like a standard measuring tape with added features.

Figure 4: Details of the tape measure, including brake lock and magnetic hook.

• Pulling the Tape: Gently pull the tape measure out to the desired length. The self-locking mechanism will hold it in place.
• Retracting the Tape: Press the Brake Lock button to control the retraction speed. Release the button to stop the tape.
• Magnetic Hook: The end of the tape features a magnetic hook, allowing it to be securely attached to metal surfaces for easier measurement.
• Note on Units: For products sold in the EU market, the tape measure will primarily display metric units (centimeters and meters).

5.2 Using the Laser Distance Meter

The laser distance meter offers various measurement modes for different applications.

Figure 5: Illustration of various measurement and calculation modes.

5.2.1 Changing Measurement Units

The device supports meters (m), feet (ft), and inches (in).

• Long press the SET key to cycle through the available units. The current unit will be displayed on the screen.

5.2.2 Changing Measurement Reference Point

The laser measurement can be taken from the front or rear of the device.

• Short press the SET key to switch the measurement reference. An icon on the display will indicate whether the measurement is taken from the front or the rear of the device.
• Important Note: When using the laser measurement from the rear reference, the measured data will be approximately 9 cm longer than the data measured by the tape measure due to the device's length.

5.2.3 Measurement Modes

Short press the MENU key to cycle through the following measurement modes:

• Single Distance Measurement:
      1. Select single distance mode (default).
      2. Point the laser at the target.
      3. Short press the MEAS key. The distance will be displayed instantly.
• Continuous Measurement:
      1. Select continuous measurement mode.
      2. Long press the MEAS key. The device will continuously measure and display the current distance, as well as the maximum and minimum values. Move the device slowly to find specific points.
      3. Short press the MEAS key again to stop continuous measurement.
• Area Measurement:
      1. Select area measurement mode.
      2. Measure the first side (e.g., length) by pressing MEAS.
      3. Measure the second side (e.g., width) by pressing MEAS.
      4. The device will automatically calculate and display the area.
• Volume Measurement:
      1. Select volume measurement mode.
      2. Measure the length by pressing MEAS.
      3. Measure the width by pressing MEAS.
      4. Measure the height by pressing MEAS.
      5. The device will automatically calculate and display the volume.
• Pythagorean Measurement:
      1. Select Pythagorean measurement mode.
      2. Follow the on-screen prompts to measure the required sides (e.g., hypotenuse and one leg for indirect height/length).
      3. The device will calculate the unknown side based on the Pythagorean theorem.

Figure 6: Display screen showing measurement standards, historical data, power, and current data, with unit switching options.

6. Maintenance

• Cleaning: Use a soft, damp cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents. For the laser lens, use a clean, lint-free cloth specifically designed for optics.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.
• Avoid Impact: While durable, avoid dropping the device or subjecting it to strong impacts, as this can affect its accuracy and functionality.
• Battery Care: Recharge the battery regularly, even if the device is not frequently used, to prevent deep discharge.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your purchase or contact HANMATEK customer service through their official website or the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.