How do I reset the circuit breakers on the Homelite LR4400 generator?
To reset the circuit breakers on your Homelite LR4400 generator, follow these steps based on the owner's manual: Identify the Breakers: The circuit breakers…
Manuals+ Q&A
Generator questions & answers
Browse answered questions about Generator, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhat spark plug does the A-iPOWER SUA2300i inverter generator use?
Based on the technical specifications for the A-iPOWER SUA2300i, the engine typically uses a Torch A5RTC spark plug (or an equivalent such as the…
Why is my cell phone not charging from the ZeroKor R350 power station despite trying different cables and ports?
Based on the ZeroKor R350 manual, here are the steps to ensure your cell phone charges correctly: Activate the DC/USB Outputs: You must manually…
How can I get a replacement for a ZeroKor R350 power station that has never charged or worked since purchase?
According to the ZeroKor Portable Power Station R350 manual, the product includes a 12-month warranty starting from the date of purchase. This warranty covers…
Why does my FIRMAN H70552 generator shut down when I move the choke lever to the 'run' position?
If your FIRMAN generator starts but dies when you move the choke lever to the 'run' position, it is typically an indication that the…
How do I enable the AC output on the ZeroKor R350, and where can I find a replacement charger?
To activate the AC output on your ZeroKor R350, follow these specific steps from the Product Operating Guide: Step 1: Single click the main…
How do I change the oil on the Champion 9000W Dual Fuel Portable Generator and where is the drain plug located?
To change the oil on your Champion 9000W Dual Fuel Portable Generator (Model 201007), follow these steps: Locate the Drain Plug: The oil drain…
Why does my Predator 4375 generator continue running after the power switch is turned off?
If your Predator 4375 generator continues to run after the power switch is turned to the OFF (O) position, it indicates that the ignition…
Why is my power station display blinking and not charging after 8 hours?
If your ALLWEI SGR-PPS300-2 display is blinking and the unit is not charging, it may have entered a protection mode or there is an…
How do I charge the ZeroKor R350 for the first time, which plug should I use, and how long does it take?
To charge your ZeroKor R350 Portable Power Station for the first time, follow these steps based on the user manual: What plug to use:…
What does the E-15 error code mean on the Duracell PowerBlock 500?
While the Duracell PowerBlock 500 manual does not explicitly list a code labeled "E-15," it does provide a Troubleshooting Guide for common faults that…
How do I reset my Duracell PowerBlock 500 when it shows an 'output overload' error and won't charge devices?
The "OUTPUT OVERLOAD" warning on your Duracell PowerBlock 500 indicates that the connected devices are drawing more power than the unit can handle (exceeding…
How do I replace a missing key for the Patriot Power Generator 1800?
Based on the Patriot Power Generator 1800 User Manual, this unit does not actually use a physical ignition key to operate. Instead, it uses…
Which setting should I use while walking or climbing stairs?
The VARON NT-3 Oxygen Generator is a pulse-flow device designed for portability and is suitable for users on the move. While the manual does…
How do I get a replacement battery for the Generac GP8000E portable generator?
To obtain a replacement battery for your Generac GP8000E, you can follow these steps: Identify the Battery Specifications: The GP8000E typically uses a 12VDC,…
What are the technical wiring data and PCB connection details for the KOHLER K-32332-NA Steam Generator?
For the KOHLER K-32332-NA Steam Generator, the technical wiring requirements and connection details are as follows: Electrical Supply: This model requires two dedicated circuits,…
Why is my AP-SS-002 portable generator not recharging even after being plugged in for two days?
If your ALLPOWERS AP-SS-002 is not recharging after being connected to power for two days, please check the following troubleshooting steps based on the…
My AP-SS-002 Portable Generator has failed to charge after two days connected to the socket. What should I do?
I'm sorry to hear your AP-SS-002 Portable Generator is not charging. The provided manual for the AP-SS-002 is very brief and does not contain…
Where can I find the PC software?
The provided manual for the PORTXVNSA SA5 Spectrum Analyzer and Signal Generator mentions "PC Connectivity: Connects via USB to function as a PC-controlled spectrum…
How do I start the Generac GP6500 portable generator?
To start the Generac GP6500 portable generator, follow these steps: 1. Make sure the generator is placed on a flat, level surface and is…
Can you provide me with some information on how to use and operate this generator?
Sure! The FIRMAN Portable Inverter Generator is a versatile and reliable power source that can be used for various applications, such as camping, tailgating,…
How do I start the FIRMAN Generator?
To start the FIRMAN Generator, you have two options. You can either start it manually using the pull cord or use the automatic electric…
How do I start the Honda EU2000i generator?
To start the Honda EU2000i generator, follow these steps: 1. Check the fuel level: Ensure that there is enough gasoline in the fuel tank.…
How do I connect a standby generator to the Siemens Generator Quick Connect Switchboard?
To connect a standby generator to the Siemens Generator Quick Connect Switchboard, follow these steps: 1. Ensure that the generator is properly installed and…