siemens logo

SIEMENS Generator Quick Connect Switchboards

SIEMENS Generator Quick Connect Switchboards

Generator Quick Connect Switchboards

Order Entry Guide
Siemens Energy Management Low Voltage and Products is pleased to announce generator quick connect Switchboards. These switchboards are not selections in COMPAS so this order entry guide is designed to help with submitting orders for this new product offering.

Product Description

Generator quick connect switchboards supply cam-type receptacles in addition to standard mechanical lugs for the quick connection of a standby generator to a facility’s normal main service entrance switchboard.

Features and Functionality

  • 600 volts AC maximum
  • 4000 ampere maximum
  • All standard front connected switchboard features
  • Crouse-Hinds 4/0, 400A plug-in connectors are supplied as a standard, other connectors can be supplied if specified by the customer
  • NEMA 1 and NEMA 3R enclosures, NEMA 3R enclosures are supplied with a front trap door to maintain the switchboard rating with cables connected
  • A removable screw cover is supplied over the quick connects when they are not in use
  • Each quick connect plug-in is labeled with it’s intended connection (A, B, C or neutral phase)
  • Quick connects can be supplied in a standard lineup for new construction or remotely to a normal switchboard lineup for retrofit applications

Standards and Certifications

  • UL891
  • NEC702
  • Florida Building Code section 420.4.2.9.7
  • Other equipment is UL listed as applicable

Order Entry Information

Quick connects can be supplied with either Sentron or VL molded case circuit breakers and also, WL insulated case circuit breakers as the generator disconnect. This generator
disconnect must be provided with mechanical interlocking with the normal main disconnect. Quick connects and the main disconnect can be supplied in a single section up to 2000 amperes. Choose “main service” as the section type in COMPAS to ensure only one device is configured per section (see figure 1). If above 2000 amperes, a pull section is required and must be selected in COMPAS (see figure 2). See table 1 for a summary of all of the configuration information and table 2 for all of the pricing information. The prices in table 2 must be added as a factory option as shown in figures 3 and 4. The quick connects are priced at $1690 per quick connect assuming each quick connect is 4/0 and carries 400 amperes. The list price adders in table 2 are for all of the quick connects that would be required in the switchboard for each amperage and system phasing.

Table 1 Configuration Information

Configuration Information Dimension (inches)
 

Ampere rating

Pull selection required  

Main device

 

Section depths

Pull section width Main section width  

Total width

 

Device continuous current ratings

400 No Sentron JD, VL JG 20 N/A 32 32 80%, 100%
600 No Sentron LD, VL LG 20 N/A 32 32 80%, 100%
800 No VL MG, Sentron MD 20 N/A 32 32 80%, 100%
1200 No VL NG, Sentron ND 20 N/A 32 32 80%, 100%
1600 No VL PG, Sentron PD 28 N/A 38 38 80%, 100%
2000 No WL 28 N/A 38 38 100%
2500 Yes WL 38 32 38 70 100%
3000 Yes WL 38 32 38 70 100%
4000 Yes WL 38 32 38 70 100%

Table 2 – List Price Adders

 

Ampere rating

Quick connects per phase  

Total list price adder (3-Phase, 4-Wire)

 

Total list price adder (3-Phase, 3-Wire)

400 1 $8,788.00 $7,030.40
600 2 $15,818.40 $12,303.20
800 2 $15,818.40 $12,303.20
1200 3 $22,848.80 $17,576.00
1600 4 $29,879.20 $22,848.80
2000 5 $38,667.20 $29,879.20
2500 7 $52,728.00 $40,424.80
3000 8 $59,758.40 $45,697.60
4000 10 $75,576.80 $58,000.80

Generator Quick Connect Switchboards | Order Entry Guide

SIEMENS Generator Quick Connect Switchboards 1

Figure 1 – Main Service Selection

SIEMENS Generator Quick Connect Switchboards 2

Figure 2 – Pull Section Required Adder

SIEMENS Generator Quick Connect Switchboards 3

Figure 3: Factory Options Selection

SIEMENS Generator Quick Connect Switchboards 4

Figure 4 – Special Modification

For questions regarding this guide, contact:
Faizan Najmi, Product Manager, Power Panels and Switchboards (817)652-6514, faizan.najmi@siemens.com.

Published by
Siemens Industry, Inc. 2019. Siemens Industry, Inc. 5400 Triangle Parkway Norcross, GA 30092
For more information, please contact our Customer Support Center. Phone: 1-800-241-4453 E-mail: info.us@siemens.com
usa.siemens.com/switchboards Order No. PDFL-GQCSB-0119 Printed in U.S.A. 2019 Siemens Industry, Inc.

Documents / Resources

SIEMENS Generator Quick Connect Switchboards [pdf] User Guide
Generator Quick Connect Switchboards, Quick Connect Switchboards, Connect Switchboards, Switchboards

References

Leave a comment

Your email address will not be published. Required fields are marked *