What is the selling price of the Fluke 835 and how can I purchase it?
Manuals+ provides product documentation and does not sell the Fluke 835 Laser Belt Alignment Tool directly. To find the current selling price and purchase…
Manuals+ Q&A
Fluke questions & answers
Browse answered questions about Fluke, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I use the Fluke 1732 Energy Logger manual to set up and operate the device?
To use the Fluke 1732 Energy Logger manual effectively with your device, follow these primary sections for setup and operation: First-time Use/Setup Wizard (Page…
The screen display on my Fluke T5-600 is not working even after changing the batteries and cleaning it. What should I do?
Since you have already replaced the batteries and cleaned the device without success, the issue may be internal or related to the 1-year calibration…
Does the Fluke 378 FC clamp meter comply with NFPA 70E standards for verification of absence of voltage when using its non-contact FieldSense technology?
Based on the manual and standard safety practices for this device, the Fluke 378 FC with FieldSense™ technology is designed to improve safety by…
Why does my Fluke 101 show 87.5 ohms instead of 0 ohms when the test leads are touched together, and how can I fix it?
If your Fluke 101 is showing a high resistance reading like 87.5 Ω when the red and black probes are touched together (it should…
Why does my Fluke 117 keep displaying 'bEEP' and how can I fix it?
The bEEP message on your Fluke 117 is likely related to the device's Power-Up Options or the VoltAlert (non-contact voltage detection) feature. Here are…
Why is my Fluke 1507 display showing garbled characters and constantly switching between different symbols after powering on?
If your Fluke 1507 display is showing garbled characters or flickering symbols immediately after powering on, it is likely due to a power or…
What is the accuracy of the Fluke 62 MAX at a distance of 10 meters, and can it measure air temperature?
Based on the Fluke 62 MAX user manual, there are two important factors regarding your request: Measuring Air Temperature: Infrared thermometers like the Fluke…
Why is my Fluke 62 MAX screen black after using the controls, and can the internal program be erased by mistake?
It is highly unlikely that you have erased the internal program of your Fluke 62 MAX. These devices use firmware that cannot be deleted…
How do I measure resistance using the Fluke 117 Digital Multimeter?
To measure resistance using the Fluke 117 Digital Multimeter, follow these steps: 1. Ensure that the meter is turned off before connecting the test…
How do I measure voltage with the Fluke 115 True-RMS Digital Multimeter?
To measure voltage with the Fluke 115 True-RMS Digital Multimeter, follow these steps: 1. Ensure that the multimeter is set to the appropriate voltage…
How do I use the Fluke ST120+ GFCI Socket Tester to test a GFCI outlet?
To test a GFCI outlet using the Fluke ST120+ GFCI Socket Tester, follow these steps: 1. Before plugging the Fluke ST120+ into the GFCI…
How do I turn on the Fluke 1AC-II Non-Contact Voltage Tester?
To turn on the Fluke 1AC-II Non-Contact Voltage Tester, follow these steps: 1. Locate the green button on the tester. 2. Press the green…
How do I install the FLUKE CV400 ClirVu 95mm Infrared Window?
To install the FLUKE CV400 ClirVu 95mm Infrared Window, follow these steps: 1. Choose a suitable location on the panel door for installation. 2.…
How do I charge the battery of the FLUKE ii900 Acoustic Imaging Camera?
To charge the battery of the FLUKE ii900 Acoustic Imaging Camera, follow these steps: 1. Connect the AC power supply to the AC wall…
How do I measure voltage with the Fluke T5-600 Electrical Voltage Tester?
To measure voltage with the Fluke T5-600 Electrical Voltage Tester, follow these steps: 1. Ensure that the tester is properly powered by inserting two…
How to use Fluke Phase Rotation Indicator to check phase sequence and connections?
To use the Fluke 9040 Phase Rotation Indicator, follow these steps: 1. Ensure that the unit is within the specified operating temperature range of…
How to use back probe pins and hook probe included in FLUKE SureGrip Deluxe Automotive Test Lead Kit?
The back probe pins and hook probe included in the FLUKE TLK282 SureGrip Deluxe Automotive Test Lead Kit are designed to provide easy and…
How do I connect the FLUKE 80BK-A Integrated DMM Temperature Probe to my digital multimeter (DMM)?
To connect the FLUKE 80BK-A Integrated DMM Temperature Probe to your DMM, follow these steps: 1. Ensure that your DMM has temperature measurement functions…
How do I connect the Fluke 80AK-A Thermocouple Adapter to my measurement device?
To connect the to your measurement device, follow these steps: 1. Identify the Type-K thermocouple mini-connector on your thermocouple probe. 2. Insert the Type-K…
How do I use the Fluke TLK281 SureGrip Automotive Test Lead Kit?
The Fluke TLK281 SureGrip Automotive Test Lead Kit is designed for automotive specialists and comes with a complete set of test and measurement accessories.…
How do I attach the Fluke C50 Meter Case to my belt for hands-free carrying?
To attach the Fluke C50 Meter Case to your belt for hands-free carrying, follow these steps: 1. Locate the belt loop on the exterior…
How do I use the Fluke 2AC Non-Contact Voltage Tester to test for voltage?
To use the Fluke 2AC Non-Contact Voltage Tester to test for voltage, follow these steps: 1. Ensure that the tester is in working condition…
How do I adjust the emissivity on the Fluke 561 HVAC Infrared and Contact Thermometer?
To adjust the emissivity on the Fluke 561 HVAC Infrared and Contact Thermometer, follow these steps: 1. Press the "MODE" button to enter the…