How do I increase the radius of the watering can in Stardew Valley?
To increase the radius of the watering can, you must first upgrade the tool at the Blacksmith (Clint) using metal bars and gold. Once…
Manuals+ Q&A
Controller questions & answers
Browse answered questions about Controller, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I set the number of steps to 16 and disable the remaining channels?
To set the controller for 16 steps and ensure the remaining channels are not used, follow these steps based on the CV_Step (Constant Voltage)…
Why does my Flydigi Direwolf 2 controller disconnect 3-4 times when connecting via dongle to a PC, and how can I fix it?
Frequent disconnections when using the wireless dongle can often be resolved by re-pairing the receiver or updating the firmware. Please try the following steps:…
How do I pair the JCHR35W1B remote with my blinds?
To pair your JCHR35W1B remote with your blinds, you must follow the specific pairing sequence for your motor, as the remote manual indicates that…
What does the flashing triangle with an exclamation point and the battery bar mean?
On the Anern AN-AT20 PWM Solar Charge Controller, these indicators typically refer to the following: Flashing Triangle with Exclamation Point: This is a fault…
How do I switch between different Bluetooth connection modes on the GUANGLI G6 controller?
To connect the GUANGLI G6 to your phone in different modes, you must first move the physical toggle switch on the controller to the…
Does the EBELONG ERC2202-W support smartphone control, timing, and scenes? What kinetic switches are compatible, and are there 1-channel or 3-channel versions available?
Yes, your understanding of the EBELONG ERC2202-W Wi-Fi On-Off Dual Controller is correct. Once connected to your 2.4GHz Wi-Fi network via the Kinetic Switch…
Which Brook adapter is required to use the Varmilo FK2 on a PS3?
The provided manual for the Varmilo FK2 Fighting Game Arcade Controller does not specify compatibility with third-party adapters like those from Brook. The manual…
Does the DATA FROG P03 Wireless Controller work natively on PS3?
Yes, the DATA FROG P03 Wireless Controller is natively compatible with the PS3 console. According to the manual, it supports both wired and wireless…
How can I swap the left and right audio channels on the BENGOO G9000 headset?
The BENGOO G9000 is designed with a fixed physical layout where the microphone and cable are attached to the left earcup. There is no…
Can I connect the EasySMX X15 controller to a Nintendo Switch using a wired connection and an adapter?
Yes, you can connect the EasySMX X15 to a Nintendo Switch. While the manual primarily describes a wireless connection for the Switch, it also…
My GameSir X3 Type-C controller is flashing and not working. What should I do?
The user manual for the GameSir X3 Type-C Cooled Mobile Gaming Controller indicates that a blinking blue LED 1 means the controller is connecting,…
Why does my Dayliff Drytek double pump controller contactor flicker on and off when I turn it on, but stay on only when I manually hold down the switch?
Based on your description of the contactor flickering (turning on and off) and only staying engaged when you manually hold the switch, there are…
Where can I purchase the EVCO EVIF22TSX Advanced Controller?
To purchase the EVIF22TSX Advanced Controller, the manufacturer recommends contacting their official sales network directly. According to the instruction manual, you can reach out…
How do I select only white color modes in dynamic mode?
The MIBOXER SPIB5 controller features 28 specific white color dynamic modes and 80 RGB dynamic modes. To select only white color effects in dynamic…
Why does my VOYEE wired controller (HY4102) keep switching to P2 mode on Windows 10, and how can I reset it without rebooting?
The issue of a single controller being assigned to Player 2 (P2) is often caused by Windows 10 retaining a "ghost" or virtual controller…
How do I switch between D-input and X-input modes, and why are my buttons swapped?
The provided manual for the 8BitDo Ultimate 2C Bluetooth Controller does not mention D-input or X-input modes. It primarily details connection methods for the…
How do I activate WLAN pairing on the ARCTIC PRO remote control?
Based on the provided manual for the ARCTIC PRO Air Conditioner Remote Controller, there are no specific instructions or dedicated buttons listed for WLAN…
Does the SpeedyBee BLS 60A 4-in-1 ESC support bidirectional features?
Yes, the SpeedyBee BLS 60A 4-in-1 ESC supports bidirectional features, specifically Bi-directional Dshot and RPM filtering. According to the manual, the ESC is loaded…
Why is the ON/OFF button on my LumiPlus wireless remote not working while the color change buttons still function?
If your LumiPlus remote is able to change colors but cannot turn the lights on or off, it suggests the remote is still communicating…
Can I use the SpeedyBee BLS 60A 4-in-1 ESC alone and connect it to a PIXHAWK 6c Mini?
Yes, you can use the SpeedyBee BLS 60A 4-in-1 ESC as a standalone component with other flight controllers like the PIXHAWK 6c Mini, though…
Is there a Japanese version of the InkBird ITC-308 user manual?
While the official manual hosted on this page is in English, InkBird does provide support for international customers. To obtain a Japanese version of…
Why is my solar charge controller showing 11V at the battery output despite an input voltage of 13.7V to 50V?
Based on the PowMr MPPT-60A manual, there are several reasons why your battery output might be showing 11V and not charging: Low Battery Voltage:…
How can I contact TESUP for warranty claims and advice on connecting an ATLAS X7 wind turbine to an existing solar panel system?
For direct support, warranty claims, or technical advice regarding the ATLAS X7 wind turbine and its compatibility with your solar panels, you can reach…