How can I report missing rotor blades for my Atlas 7 KW wind turbine system?
It appears you are reporting missing components (the top 3 inclined rotor blades) for your Atlas 7 KW system delivery. Please note that Manuals+…
Manuals+ Q&A
Controller questions & answers
Browse answered questions about Controller, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I connect 5 LED lights to the PAL PCR-2Z 65 lighting controller?
The PAL PCR-2Z lighting controller is designed with specific terminal blocks for two zones (Z1 and Z2). According to the manual: Terminal Capacity: The…
How to set the differential (Hy) on the Copeland XR02CH?
To adjust the differential (parameter Hy) on the Copeland XR02CH digital controller, follow these steps: Enter Programming Mode: Press and hold the SET and…
Is the SILVERCREST 414502 Wireless Gaming Controller compatible with a PC?
Based on the provided instruction manual, the SILVERCREST 414502 is explicitly designed for use with the Nintendo Switch console. The manual does not list…
My controller is not turning on. Despite correct polarity. My panels are not yet connected. What should I do?
If your Felicity Solar MPPT Solar Charge Controller is not turning on, even with correct polarity and before connecting the solar panels, here are…
How do I use a wired headset with the GAM-103-W controller when connected via Bluetooth to a Nintendo Switch?
Based on the manual for the DELTACO GAMING GAM-103-W, the 3.5mm audio port is intended for connecting a microphone, headphones, or a headset. However,…
How do I set the PowMr MPPT-60A to charge a 4S lithium battery pack at 16.80V?
To set your PowMr MPPT-60A for a 4S lithium battery pack with a 16.80V charging limit, follow these steps. Note: All manual settings must…
Does the ipega PG-9097 wireless controller support motion control?
Based on the available documentation for the ipega PG-9097, there is no mention of motion control or a 6-axis gyroscope feature. The manual highlights…
How do I fix my GuliKit KK3 MAX controller if it only stays on when plugged in and won't work wirelessly despite being fully charged?
If your GuliKit KK3 MAX is showing a green light (full charge) but will not stay powered on wirelessly, you should first attempt a…
Are these under warranty when bought? I have some recently purchased and they’re broken
The provided manual for the Bonacell RH-LR004 Wireless Controller does not contain specific information regarding warranty coverage. However, it does state under section "16.…
Can I use the YoloDeck with a YoloBox Ultra to trigger instant replays during a football match without actually being live on a stream?
Based on the YoloDeck Quick Start Guide, there are a few important considerations for your setup: Mode Requirement: The manual explicitly states that "YoloDeck…
Why is there no LED light on my new CURT 51180 Echo Mobile Brake Controller, and how can I get a replacement?
If the LED on your CURT Echo does not light up when plugged into the 7-way connector, it usually indicates a power issue rather…
Why does my Fantech Nova WGP14 controller blink yellow and turn off when plugged into my PC?
Based on the Fantech WGP14 Nova manual, a blinking light typically indicates a charging state or a low battery condition. If your controller is…
What is the purpose of the USB port on the Chameye E300N, and can I connect the display to an external monitor or TV?
According to the Chameye E300N User Manual, the USB port is indeed a "reserved interface, no function" (Page 9), meaning it currently serves no…
Where can I find instructions for the SuperRC S156 smart controller with a built-in screen?
You are correct that the manual currently displayed on this page primarily illustrates the standard remote controller (which uses a mobile phone holder) rather…
Why does my SURGE SwitchPad Wireless Pro Controller fail to auto-reconnect to my Fire Stick after being turned off?
The SURGE SwitchPad Wireless Pro Controller (SG60071) is primarily designed for the Nintendo Switch, and while it uses Bluetooth for connectivity with other devices,…
Why is the Enter button not validating settings on the PowMr HHJ60-PRO?
Based on the PowMr HHJ60-PRO manual, the ENTER button is specifically used as a confirmation button within the settings menu. If you are unable…
What are the motor connector specifications for the TMCM-1640?
The TMCM-1640 uses a 3-pin connector for the motor coils. According to the hardware manual, the specifications are as follows: Connector Type (on-board): Tyco…
What is the price and availability of the Istapower 48V 2000 Hybrid Wind Solar Controller?
Manuals+ provides digital user manuals and technical documentation for products but does not sell hardware or maintain information regarding current pricing and retail availability.…
How do I connect to Xbox?
I apologize, but the provided user guide for the GUANGLI G6 Wireless Gaming Controller does not contain instructions on how to connect the controller…
My Subsonic PS4 controller disconnects when I turn it on. I tried resetting it with a paperclip as described in the manual, but it didn't work. How do I reset it?
The manual for the Subsonic SA5633 Wireless LED Controller states that if you are unable to connect the controller to the console, you should…
What is the firmware upgrade password for the Kogan BSP-D11 controller?
The official instruction manual for the Kogan BSP-D11 Stretching Wireless Game Controller does not list a specific firmware upgrade password. This prompt often appears…
Can I extend the wires for the motion sensors and the light sensor?
Yes, you can extend the wires for both the PIR motion sensors and the daylight sensor. The manual states that the PIR sensor can…
Is it possible to lock the remote controller settings?
Based on the provided manual for this specific AUX remote controller, there is no mention of a dedicated "Lock" button or child-lock function. The…