How do I factory reset the Beurer BM 40 blood pressure monitor?
The Beurer BM 40 does not have a dedicated "factory reset" button. However, you can clear the stored memory and reset the device settings…
Manuals+ Q&A
Beurer questions & answers
Browse answered questions about Beurer, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Which battery should I order for the Beurer LS 10 luggage scale?
For the Beurer LS 10 luggage scale, you need to order LR44 button cell batteries. The device requires three (3) of these batteries to…
Why does the Beurer BM 28 alarm not sound at the set time?
If the alarm on your Beurer BM 28 is not sounding at the set time, it may be because the alarm is not fully…
Why is the acoustic signal (beep) not working and the display not lighting up automatically during measurement on my Beurer FT 90?
Based on the Beurer FT 90 manual, here are the steps to resolve issues with the acoustic signal and display lighting: Acoustic Signal (Beep):…
Why does my Beurer BF 700 scale display 'Err' or '00' even after resetting and changing batteries?
Based on the Beurer BF 700 manual, the 'Err' or '00' (incorrect weight) messages typically relate to the following conditions and solutions: Incorrect Zero…
I put in new batteries and am getting a red flashing light. I cannot find what that means. The brand of batteries is one I haven't used before. I use this device daily all summer. Is it possible that it is worn out?
A flashing red light on your Beurer BR 10 Insect Bite Healer indicates that the battery level is too low for further applications. The…
How to use the scale as a guest without using user profiles?
Based on the instruction manual for the Beurer BF990, the scale is designed to be used with the "beurer HealthManager Pro" app and an…
How do I reset the Beurer EM 49 TENS machine if it is stuck on one program?
If your Beurer EM 49 is stuck on one program, it is likely that the Doctor’s Function has been activated. This is a special…
How do I switch the temperature unit from Fahrenheit to Celsius?
To switch the temperature unit on your Beurer HM 22 Thermo Hygrometer between Celsius (°C) and Fahrenheit (°F), press the [UP/CF] button. This button…
Can the Beurer HK 48 heated cushion be used while disconnected from the power source after it has heated up?
No, the Beurer HK 48 Cosy Heated Cushion cannot be used as a cordless heating device. It must remain connected to the mains power…
How do I change the units from kPa to mmHg on the blood pressure monitor?
I understand you're looking to change the unit of measurement on your Beurer BC 87 blood pressure monitor from kPa to mmHg. However, after…
I have an older Beurer MP30 Manicure/Pedicure Set and need a replacement charger. Is a charger still available for this unit, or can a charger from later models be used?
The provided manual is for the Beurer MP 41, not the MP30. However, based on the technical specifications for the MP 41, the input…
Why is my Beurer FC 52 Silicone Face Cleansing Brush not charging even when using different cables?
Based on the Beurer FC 52 instruction manual, here are the troubleshooting steps and details regarding charging issues: Charging Indicator: When the device is…
Why does my Beurer EM 50 flash green once, then flash orange and beep before turning off and failing to charge?
Based on the Beurer EM 50 (Menstrual Relax) manual, the behavior you are describing indicates a charging or battery error. Here is the troubleshooting…
My EKG curve is not displayed satisfactorily on my smartphone (Android 8). After the curve is briefly visible, it switches to an enlarged view that only shows a section. I cannot change or undo this view.
The manual indicates that if the app is displayed incorrectly on your smartphone, you should check if your smartphone is on the list of…
Why is my Beurer HD 150 XXL heated overblanket no longer heating up?
If your Beurer HD 150 XXL heated overblanket is no longer heating, please check the following troubleshooting steps based on the manual: Check the…
What does the arrow pointing up with the number 2 mean on the display?
On the Beurer BM 27, an arrow pointing up next to a number (such as 1, 2, 3, or 4) indicates the User Memory…
The display on my Beurer HM 16 is blank except for a central black line, and changing the battery did not help. How can I fix this?
If your Beurer HM 16 display shows only a black line after a battery change, it typically indicates a hardware fault or a poor…
How can I purchase replacement covers for the Beurer FM 90 foot massager in Australia?
The Beurer FM 90 Foot Massager features removable and washable covers, but the manual does not list a specific part number for purchasing replacements…
Why is my thermometer turning on but the screen is blank?
If your Beurer FT 65 thermometer seems to turn on (for example, if it beeps or the LEDs light up) but the LCD screen…
My thermometer is not turning on after changing the batteries. What should I do? Is it broken?
If your Beurer FT65 Multi-Function Thermometer is not turning on after changing the batteries, please consider the following: Check the batteries: Ensure you are…
How do I use the Beurer FT 70 thermometer?
The Beurer FT 70 is a multi-function thermometer that can measure temperature via the ear or forehead. Here are the basic steps to get…
Why is there no air passing through the pipes or pressure in the leg cuffs of my Beurer FM 150?
If your Beurer FM 150 leg cuffs are not inflating or you feel no pressure, please check the following troubleshooting steps based on the…
I have the Beurer BM55 and cannot get the recorded measurements to display on the device. When I turn on the device, which is plugged into the mains and also has batteries, then press M1 or M2 for 3 seconds, the device starts to inflate the cuff to begin measuring blood pressure without going into the recorded data reading mode.
To view the recorded measurements on your Beurer BM55 Blood Pressure Monitor, please follow these steps: First, turn on the blood pressure monitor by…