Where is the charging port located on the Asrcs X13 dog training collar remote and receiver?
For the Asrcs X13 Dog Training Collar, the charging ports are located as follows: Receiver Collar: The charging port is located on the main…
Manuals+ Q&A
Product questions & answers
Find setup, troubleshooting and compatibility answers. Browse questions by topic or open the questions linked to your product manual.
Browse topics
Latest answered questions
Newest questionsWhy does the volume indicator box appear in the lower left corner of my AX 700 TV when I am not adjusting the sound level?
If the volume indicator (sound box) is appearing on your AX 700 TV without user input, it usually indicates a signal being sent to…
How do I set up my Smart Doorbell X9 to receive push notifications on my mobile phone when someone presses the button?
To receive notifications on your mobile phone when someone presses the Smart Doorbell X9 button, please follow these steps to ensure the app has…
Why can't I make phone calls or hear call audio when using the Noble Sceptre TBT03 with a smartwatch and smartphone, and should the Noble FoKus app have phone permissions?
The Noble Sceptre TBT03 is primarily designed as a high-fidelity Bluetooth transmitter (dongle) to provide enhanced audio codecs and range for audio playback. Based…
How do I calibrate the KERN PBS precision balance?
The KERN PBS precision balance uses an external adjustment program (CAL) for calibration. To calibrate the device, you will need an external test weight.…
What is the use of the AI button on the Infinix HOT 70 (X6895B)?
On the Infinix HOT 70 (Model X6895B), the button located on the right side of the device (below the Power/Fingerprint button) is identified as…
How do I operate the Verizon Fios TV+ DVR, and are there any mobile apps available for it?
To operate your Verizon Fios TV+ DVR (Video Media Server model VMS4100ATV), you primarily use the included remote control and the on-screen interface. While…
In a WatchDog 3000 Series .WD3 file, what unit of measurement is represented by the value 0.75 in the seventh field of an RM record?
Based on the WatchDog 3000 Series product manual, the .WD3 file format is used for logging data to a USB flash drive. While the…
How do I remove the blade from the MAXGROOM M-9098 Body Hair Groomer?
To remove the blade from your MAXGROOM M-9098 Body Hair Groomer, follow these steps based on the product manual: Power Off: Ensure the device…
How do I wire the VOTOL EM-50 controller?
To wire the VOTOL EM-50 controller, you must connect the three primary interface connectors (L1, L2, and L3) as well as the main power…
Why is my FUFU and GAGA ceiling fan making three beeping noises, and how do I reset the remote?
While the manual for the FUFU and GAGA Ceiling Fan (Model KF020230-01) does not explicitly define a "three-beep" code, beeping sounds are typically associated…
Where can I find the user manual and replacement parts list for the Roco 63529 SBB-CFF-FFS Ce 6/8 II locomotive?
The documentation for the Roco 63529 (SBB-CFF-FFS Ce 6/8 II) locomotive is available as a combined replacement parts list and assembly guide. This document…
Can I assign individual pads to sounds from different drum kits on the SM110?
Based on the SM110 Module User Guide, you cannot directly assign a pad to a different "Drum Kit" number (e.g., P01 or P02) because…
Why does the interior alarm on the Zeekr 001 keep triggering when a pet is inside, even with the correct settings?
The Zeekr 001 is equipped with an internal motion detection system as part of its anti-theft features. If an animal is left inside the…
How can I turn off the radar while keeping the rear light active on the LEZYNE Radar Drive 300?
Based on the LEZYNE Radar Drive Rear (1-LED-43R-V104) manual, there is no dedicated physical switch to disable the radar while keeping the light on.…
How do I determine if the Galnolt FDDL09-R LED Desk Lamp uses a 5.5mm x 2.1mm or a 5.5mm x 2.5mm DC barrel jack?
Determining the difference between a 5.5mm x 2.1mm and a 5.5mm x 2.5mm DC jack can be difficult because they look nearly identical. Both…
My Einhell TC-TS 2025/2 U bench-type circular saw worked for a while but then stopped; I replaced the switch but the problem persists. What can I do to fix this?
Based on the troubleshooting guide for the Einhell TC-TS 2025/2 U, if the saw does not start or stops unexpectedly even after replacing the…
How can I bleed ABS brakes using the INNOVA SD35 SD-Advisor Diagnostic Tablet if the scanner says the function is not supported?
The INNOVA SD35 SD-Advisor Diagnostic Tablet provides enhanced OEM-level diagnostics for ABS systems, but the availability of specific functions like ABS brake bleeding depends…
How do I connect the SONOFF SWITCH-WF to Alexa?
To connect your SONOFF SWITCH-WF to Amazon Alexa, you must first ensure the device is successfully added to the eWeLink app. Follow these steps…
How do I attach the lid to the Electrolux 700/800 Kitchen Machine on the Barley 2.0 IFU rev2-5p?
Based on the Electrolux 700/800 Kitchen Machine manual, there are two types of lids mentioned: the Splash Guard (9a) for the mixing bowl and…
What is the part number or specification for the power supply for the Galnolt FDDL09-R LED Desk Lamp so I can find a replacement?
The official manual for the Galnolt FDDL09-R does not list a specific manufacturer part number for the power adapter. However, based on the product…
How do I access the middle stripping screen on the VEVOR / YUCHENGTECH SWT508-JE and how do I configure the settings?
To access and configure the middle stripping (intermediate stripping) settings on the YUCHENGTECH / VEVOR SWT508-JE, follow these steps based on the microcomputer control…
How do you change the batteries in the Naväge Nose Cleaner?
To change the batteries in your Naväge Nose Cleaner, follow these steps: Locate the Battery Door: The battery door is located on the white…
The pedal on my Korg LP-380 digital piano that should hold the note does not work. What could be the issue after moving to a new place?
If the damper pedal (the rightmost pedal used to hold notes) is not working after moving your Korg LP-380, the most likely cause is…