Can I keep the headphones in the charging case when not in use?
Yes, you can and should keep your JBL Tune Beam 2 earbuds in the charging case when you are not using them. This is…
Manuals+ Q&A
Product questions & answers
Find setup, troubleshooting and compatibility answers. Browse questions by topic or open the questions linked to your product manual.
Browse topics
Latest answered questions
Newest questionsDoes the seller have a chipless jig available for the HP OfficeJet PRO 9730 printer?
Based on the available documentation for RUI JI BTF products, there is currently no mention of a chipless jig or main board specifically for…
Where can I purchase a replacement power adapter for my FUNYET 2-in-1 Laptop Tablet N100 after the original one was damaged?
To purchase a replacement power adapter for your FUNYET 2-in-1 Laptop Tablet (N100), you should follow these steps: Contact FUNYET Support: The manufacturer offers…
How do I pair two remote controls to the same eMylo R22011KA RF Wireless Remote Control Switch?
To pair multiple remote controls to the same eMylo RF Wireless Remote Control Switch, you must repeat the pairing process for each individual remote.…
Is it possible to change the voice prompt language to German on the Lubluelu CHYW201 Robot Window Washer?
Based on the available instruction manual for the Lubluelu CHYW201, there are no specific instructions or button combinations listed for changing the voice prompt…
Where can I find a replacement power adapter for the ZEDAR Smart Photo Frame F600?
The manual for the ZEDAR Smart Photo Frame F600 does not list the specific electrical output (voltage/amperage) for the power adapter. To find a…
How do I set the time and date on the SKMEI 2357 digital watch?
To set the time and date on your SKMEI 2357, follow these steps while in the standard Timekeeping mode: Enter Setting Mode: Press and…
What is the ASIN for the replacement batteries for the Samsung UN40F6000F remote control, and where can I buy them?
The Samsung UN40F6000F TV uses a remote control (Model TM1240A) that requires two (2) AAA batteries. Batteries are standard consumer items and do not…
How do I reset the powerboard after a trip, how do I know it's tripped, and should the line on the black switches be pushed down or up?
To reset your Addtam AD9110 Power Strip Surge Protector after a trip, you will typically find a reset button. Most surge protectors have a…
How do I fix the MFG MODE error on an HP LaserJet Pro 4001-4104 printer?
The message typically appears on the printer control panel when entering the Boot menu to perform a Semi-reset. This is often used to resolve…
How can I fix connection issues between the iHseno K18 tracker and my Samsung A54?
If your iHseno K18 tracker is not connecting to your Samsung A54, please follow these troubleshooting steps specifically for Android devices: Ensure Power: Press…
How do I assemble the IKEA BRUKSVARA Bed Frame (805.708.93)?
The assembly of the IKEA BRUKSVARA Bed Frame (Model AA-2398549-1) involves several key steps using the provided hardware. Below is a summary of the…
Where are the wireless door lock sensors located on a Maruti Suzuki Brezza?
In the Maruti Suzuki Brezza equipped with a keyless entry system, the wireless sensors (antennas) and request switches are located in the following areas:…
How do I add a profile or register a new account in the FitShow app?
To add a profile or register a new account in the FitShow App, follow these steps based on the user instructions: Open the App:…
What do two beeps mean when an athlete passes through the beam in Flying Start mode?
According to the OVR Sprint User Manual, the device provides audible feedback (beeps) to indicate specific actions. While the manual does not explicitly define…
Only one of my two wireless microphones is producing sound through the JYX-66BT speaker. How can I get both wireless microphones to work simultaneously?
The JYX-66BT wireless microphones are designed to be pre-paired and should connect automatically when powered on. If only one is working, please follow these…
How can I obtain a replacement pressure relief valve for my Carl Schmidt Sohn Kaiserslautern 6-litre pressure cooker?
To obtain a new pressure relief valve for your Carl Schmidt Sohn Kaiserslautern 6-litre pressure cooker (Model 077365), you should follow these steps based…
My NULKOMMA S.WIDOM LCD display does not calculate the ODO distance, even though the TRIP distance works perfectly. What could be wrong and how can I solve it?
If your NULKOMMA S.WIDOM LCD is correctly calculating TRIP distance but not ODO (Odometer) distance, it usually indicates a software glitch or a specific…
Which key should I press to exit the BIOS on the JINGSHA B75A ITX motherboard?
To exit the BIOS on the JINGSHA B75A ITX Motherboard, you typically have two options depending on whether you want to save your changes:…
How do I put the removable grid back into the Tefal YumMeal Multicooker?
To put the removable grid (Component F) back into your Tefal YumMeal Multicooker, follow these steps based on the manual's assembly diagrams: Orientation: Ensure…
How can I fix my Mooer GE 100 Pro expression pedal when the volume doesn't go all the way to 0, even after calibration?
I understand you're having trouble with your Mooer GE 100 Pro expression pedal not reaching 0 volume, even after calibration. Unfortunately, without the specific…
What are the brake specifications and types for the HIMO Z16 Folding Electric Bicycle?
Based on the HIMO Z16 Folding Electric Bicycle User Manual, the bike is equipped with Front and Rear Disc Brakes. While the manual does…
How can I fix the expression pedal on my Mooer GE100 if the volume does not go all the way down to zero?
To fix an expression pedal that does not reach the full range of values (such as not reaching 0 volume), you need to recalibrate…
I tried to enter the BIOS on my JINGSHA B75A ITX Motherboard during startup, but now it is stuck with no image even though everything powers on. How can I get it to boot again?
If your JINGSHA B75A ITX system is powering on but failing to display an image after attempting to enter the BIOS, you likely need…