JINGSHA B75A ITX Motherboard CPU Combo Kit

Contents

JINGSHA B75A ITX Motherboard CPU Combo Kit User Manual

Model: B75A ITX Motherboard CPU Combo Kit

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JINGSHA B75A ITX Motherboard CPU Combo Kit. This kit includes a JINGSHA B75A Mini-ITX motherboard and a pre-installed Intel Core i5-3570 processor. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

JINGSHA B75A ITX Motherboard CPU Combo Kit with Intel Core i5-3570 processor

The JINGSHA B75A ITX Motherboard CPU Combo Kit, featuring an Intel Core i5-3570 processor with 4 cores/4 threads, 3.4GHz/3.8GHz, and integrated HD Graphics 2500.

2. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your vendor immediately.

  • 1 x JINGSHA B75A ITX Motherboard
  • 1 x Intel Core i5-3570 Processor (pre-installed)
  • 1 x I/O Shield
  • 1 x SATA Cable

Note: The CPU included in this kit is a used component, tested for good condition and covered by a 1-year warranty. Due to shipping regulations, the motherboard battery may be removed before shipment. Please acquire and install a CR2032 coin cell battery if needed.

3. Specifications

Table of JINGSHA B75A Motherboard Product Specifications

A table summarizing key specifications of the B75A Motherboard, such as form factor, dimensions, CPU socket, RAM slots, display ports, storage, and USB interfaces.

3.1. Motherboard Specifications

FeatureDescription
Part#B75A Motherboard
Form FactorMini-ITX, 170mm x 170mm
CPU SocketLGA 1155
Processor SupportedIntel Pentium, Celeron, Core i3/i5/i7 (2nd and 3rd generation)
ChipsetIntel B75
Memory Slots2 x DDR3 PC RAM (1066/1333/1600MHz)
Max Memory16 GB (Dual Channel Architecture)
Graphic Card Slot1 x PCI-E x16 (PCI-E 3.0)
Storage Interface TypeSATA 2, SATA 3, M.2 (NVMe), M.2 (SATA)
SATA Ports1 x SATA3.0, 3 x SATA2.0
M.2 Slots1 x NVME M.2 (PCIEx4 2.0 speed), 1 x NGFF M.2 KeyA/E WIFI port (supports WIFI+Bluetooth)
USB Ports4 x USB3.0, 6 x USB2.0 (Back I/O: 2*USB3.0, 2*USB2.0; Onboard: 2*USB3.0, 4*USB2.0)
Onboard LAN100M Fast Ethernet (1x RJ45)
AudioRealtek ALC662, 5.1 HD Audio
PSU SolutionATX 4Pin + ATX 24Pin
Display PortsHDMI-Compatible, VGA
RAID SupportedNo
Quality CertificationCE

3.2. CPU Specifications (Intel Core i5-3570)

FeatureDescription
Processor SeriesIntel Core i5-3570
Cores / Threads4 Cores / 4 Threads
Base Frequency3.40GHz
Max Turbo Frequency3.80GHz
Socket TypeLGA1155
L3 Cache6 MB
Memory TypesDDR3 1333/1600MHz
Technology22nm
TDP77W
Processor GraphicsIntel HD Graphics 2500

4. Setup

Before you begin, ensure you have a clean, static-free workspace. It is recommended to wear an anti-static wrist strap to prevent damage to components.

Diagram of B75A Motherboard Layout with labeled components

Detailed diagram illustrating the layout of the B75A motherboard, including CPU Socket, DDR3 Slots, M.2_WIFI, M.2_NVME, SATA ports, USB ports, and front panel headers. This diagram is crucial for identifying component locations during setup.

4.1. Motherboard Installation

  1. Prepare the Case: Install the I/O shield into the rear opening of your PC case.
  2. Mount the Motherboard: Carefully align the motherboard with the standoffs in your PC case. Secure it with screws.
  3. Install CPU Cooler: Attach your LGA1155 compatible CPU cooler to the motherboard. Ensure proper thermal paste application and secure mounting. Connect the CPU fan cable to the 'CPU_FAN' header.

4.2. Memory (RAM) Installation

  1. Locate the two DDR3 RAM slots on the motherboard.
  2. Open the clips at both ends of the memory slot.
  3. Align the notch on the RAM module with the notch in the slot.
  4. Press down firmly on both ends of the RAM module until the clips snap into place. For dual-channel performance, install modules in both slots.

4.3. Storage Device Installation

  • SATA Drives: Connect your SATA hard drives or SSDs to the SATA ports (1x SATA3.0, 3x SATA2.0) using SATA data cables. Connect power from your PSU to the drives.
  • NVMe M.2 SSD: Insert your NVMe M.2 SSD into the dedicated NVME M.2 slot. Secure it with the provided screw.
  • M.2 WIFI/Bluetooth Module: If using, install your M.2 KeyA/E WIFI module into its designated slot and secure it. Connect any external antennas if required.

4.4. Power Supply Unit (PSU) Connections

  1. Connect the 24-pin ATX main power connector from your PSU to the corresponding slot on the motherboard.
  2. Connect the 4-pin ATX 12V power connector from your PSU to the corresponding slot near the CPU socket.

4.5. Front Panel and Peripheral Connections

  • Front Panel Headers: Connect your case's power button, reset button, HDD LED, and power LED cables to the F_PANEL header. Refer to the motherboard layout diagram for correct pin orientation.
  • Front Audio: Connect your case's front audio cable to the F_AUDIO header.
  • Front USB: Connect your case's front USB 2.0 and USB 3.0 cables to the respective onboard USB headers.
  • System Fan: Connect any additional case fans to the 3PIN SYS_FAN headers.
  • Rear I/O Ports: Connect your monitor to the HDMI or VGA port. Connect USB peripherals (keyboard, mouse) to the USB 2.0 or USB 3.0 ports. Connect your Ethernet cable to the RJ45 port. Connect audio devices to the HD Audio jacks.
Close-up of JINGSHA B75A Motherboard rear I/O ports

A detailed view of the motherboard's rear input/output ports, including USB 2.0, HDMI, VGA, USB 3.0, 100Mbps Ethernet, and HD Audio jacks, essential for connecting peripherals.

5. Operating Instructions

5.1. First Boot

  1. After all components are installed and connected, ensure your monitor is connected and powered on.
  2. Press the power button on your PC case.
  3. The system should power on and display the BIOS/UEFI splash screen.

5.2. BIOS/UEFI Setup

To enter the BIOS/UEFI setup utility, press the 'DEL' or 'F2' key repeatedly during the initial boot sequence. In the BIOS, you can configure system settings such as boot order, date/time, and hardware parameters.

5.3. Operating System Installation

Insert your operating system installation media (USB drive or DVD) and configure the boot order in the BIOS to boot from the media. Follow the on-screen instructions to install your preferred operating system.

5.4. Driver Installation

After installing the operating system, install the necessary drivers for the motherboard's chipset, LAN, audio, and any other integrated components. These drivers are typically available on the manufacturer's website or included with the motherboard on a driver CD/USB (if provided).

6. Maintenance

  • Dust Cleaning: Regularly clean dust from inside your PC case, especially from the CPU cooler, heatsinks, and fan blades, using compressed air or a soft brush. Dust buildup can lead to overheating.
  • BIOS Updates: Periodically check the manufacturer's website for BIOS updates. Only update the BIOS if necessary and follow the instructions carefully, as an improper update can damage the motherboard.
  • Thermal Paste: If you replace the CPU cooler or notice high CPU temperatures, consider reapplying thermal paste to the CPU.

7. Troubleshooting

  • No Power/No Boot:
    • Ensure all power cables (24-pin ATX, 4-pin CPU) are securely connected to the motherboard and PSU.
    • Verify the power supply is switched on and functioning correctly.
    • Check front panel connections (power button) are correctly seated.
  • No Display:
    • Ensure your monitor is connected to the correct video output (HDMI or VGA) on the motherboard.
    • Reseat RAM modules firmly in their slots. Try booting with only one RAM module if you have multiple.
    • Check if the CPU cooler is properly installed and its fan is spinning.
  • Operating System Issues (e.g., Windows 11):
    • The B75A motherboard and Intel Core i5-3570 processor (3rd generation) do not officially support Windows 11, which typically requires 8th generation Intel CPUs or newer. While unofficial installations may be possible, performance and stability are not guaranteed.
  • M.2 SSD Not Detected:
    • Ensure the M.2 SSD is correctly seated and secured in the NVME M.2 slot.
    • Check BIOS settings to ensure the M.2 slot is enabled and configured correctly (e.g., NVMe mode).

8. User Tips

  • CPU Condition: The Intel Core i5-3570 processor included in this kit is a used component. It has been tested to ensure good working condition.
  • RAM Capacity: The motherboard supports up to 16GB of DDR3 RAM across its two slots. For optimal performance, consider installing two 8GB DDR3 modules to utilize dual-channel memory.
  • M.2 Storage: This motherboard supports both NVMe M.2 SSDs for high-speed storage and M.2 KeyA/E modules for Wi-Fi and Bluetooth connectivity, offering versatile expansion options.

9. Warranty and Support

The Intel Core i5-3570 processor included in this kit comes with a 1-year warranty from the date of purchase. For any technical support or warranty claims regarding the motherboard or CPU, please contact the JINGSHA Global Store directly through your purchase platform.

It is recommended to keep your purchase records, including order number and date, for warranty purposes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.