UNTITLED Opti Plex Desktop Computer
ਉਤਪਾਦ ਨਿਰਧਾਰਨ
- Components included: Desktop board, Crossarm, Desktop poles
- (2), Layerboard, Lockable wheels (4), Adjustable knobs (4), Hooks
- (2), Screwdrivers (1), Screws of various sizes
- ਪਦਾਰਥ: ਧਾਤ ਅਤੇ ਪਲਾਸਟਿਕ
- ਮਾਪ: [ਇੱਥੇ ਮਾਪ ਪਾਓ]
- ਭਾਰ: [ਇੱਥੇ ਭਾਰ ਪਾਓ]
ਲੋੜੀਂਦੇ ਸਾਧਨ
ਅਸੈਂਬਲੀ
- Install2atthe bottomoftheleg on4lockable wheels
- Screw four 6cm Since the tapping on the layerboard
- Tighten 4 x 6cm Since the tapping and 4 x 4cm flat head screws in the position shown in the picture
- Insert 2 desktop poles into the bottom of the leg (This step is already installed)
- Mount the desktop pole on the desktop board with four 3cm flat head screws
- Tighten 4 adjustable knobs
- Tighten the 2 hooks on both sides of the desktop plate and the 2 pointedshort screws with 4 * 1 cm flat head screws
- Installation steps with the monitor stand Screw the monitor poles to the monitor board with a 4 * 1cm flat head screw
- Insert the Monitor poles C-slot into the monitor board and tighten the 4 * 1cm flat head screw
- Installation completed! 2 types of feet can be switched to use
ਪਲੇਸਮੈਂਟ
Place the assembled product in a suitable location, ensuring stability and proper alignment.
ਸਮਾਯੋਜਨ
Make any necessary adjustments to the height or position of the components to suit your needs.
ਰੱਖ-ਰਖਾਅ
Regularly check and tighten screws and knobs to maintainstability. Clean the product with a damp ਲੋੜ ਪੈਣ 'ਤੇ ਕੱਪੜਾ।
ਅਕਸਰ ਪੁੱਛੇ ਜਾਂਦੇ ਸਵਾਲ
Q: Can I adjust the height of the desktop board?
A: Yes, you can adjust the height by loosening the adjustable knobs, repositioning the components, and then tightening the knobs securely.
Q: How do I attach a monitor to the monitor stand?
A: Follow the provided instructions to mount the monitor poles to the monitor board using the specified screws and slots.
ਦਸਤਾਵੇਜ਼ / ਸਰੋਤ
 |
UNTITLED Opti Plex Desktop Computer [pdf] ਹਦਾਇਤ ਮੈਨੂਅਲ Opti Plex Desktop Computer, Plex Desktop Computer, Desktop Computer, Computer |