UNTITLED Opti Plex Desktop Computer
Product Specifications
- Components included: Desktop board, Crossarm, Desktop poles
- (2), Layerboard, Lockable wheels (4), Adjustable knobs (4), Hooks
- (2), Screwdrivers (1), Screws of various sizes
- Material: Metal and plastic
- Dimensions: [Insert dimensions here]
- Weight: [Insert weight here]
Tools Required
Assembly
- Install2atthe bottomoftheleg on4lockable wheels
- Screw four 6cm Since the tapping on the layerboard
- Tighten 4 x 6cm Since the tapping and 4 x 4cm flat head screws in the position shown in the picture
- Insert 2 desktop poles into the bottom of the leg (This step is already installed)
- Mount the desktop pole on the desktop board with four 3cm flat head screws
- Tighten 4 adjustable knobs
- Tighten the 2 hooks on both sides of the desktop plate and the 2 pointedshort screws with 4 * 1 cm flat head screws
- Installation steps with the monitor stand Screw the monitor poles to the monitor board with a 4 * 1cm flat head screw
- Insert the Monitor poles C-slot into the monitor board and tighten the 4 * 1cm flat head screw
- Installation completed! 2 types of feet can be switched to use
Placement
Place the assembled product in a suitable location, ensuring stability and proper alignment.
Adjustments
Make any necessary adjustments to the height or position of the components to suit your needs.
Maintenance
Regularly check and tighten screws and knobs to maintainstability. Clean the product with a damp cloth when needed.
FAQs
Q: Can I adjust the height of the desktop board?
A: Yes, you can adjust the height by loosening the adjustable knobs, repositioning the components, and then tightening the knobs securely.
Q: How do I attach a monitor to the monitor stand?
A: Follow the provided instructions to mount the monitor poles to the monitor board using the specified screws and slots.
Documents / Resources
 |
UNTITLED Opti Plex Desktop Computer [pdf] Instruction Manual Opti Plex Desktop Computer, Plex Desktop Computer, Desktop Computer, Computer |