ORTECH TRAP-DS-SL Dual Size Lint Trap
OPERATION
WARNING
THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN.
- Easy to clean
- Suitable for 4″ and 5″ diameter duct
CAUTION
PLEASE READ THE INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCE. HVAC products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent technician.
INSTALLATION GUIDE
- Clean the dryer top surface properly before installation
- Mark lint trap position on the dryer
- Fix double-sided foam tape on the bottom surface of the lint trap to help the lint trap stick on the top dryer
- Connect the ducts to the collars as shown on the left diagram
Clear the Lint Trap
Pull out the screen, clear the lint on the mesh, and then push the screen back to the housing ORTECH reserves the right to modify at any time, without notice, any or all of our product’s features, designs, components and specifications to meet market changes.
Documents / Resources
 |
ORTECH TRAP-DS-SL Dual Size Lint Trap [pdf] Instruction Manual TRAP-DS-SL, Dual Size Lint Trap, Lint Trap, TRAP-DS-SL, Trap |
