Instruction Manual for ORTECH models including: TRAP-DS-SL, Dual Size Lint Trap, Lint Trap, TRAP-DS-SL, Trap
LINT TRAP-DS-SL
Mark lint trap position on the dryer. 3. Fix double sided foam tape on the bottom surface of the lint trap to help the lint trap stick on the top dryer. 4 ...
File Info : application/pdf, 1 Pages, 645.30KB
DocumentDocumentLint Trap (Dual Size) MODEL LINT TRAP-DS-SL Instruction Manual OPERATION WARNING -- THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN. 1. Easy to clean 2. Suitable for 4" and 5" diameter duct CAAUUTTIOIONN PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES. HVAC products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent technician. INSTALLATION GUIDE Bottom collar Pipe Duct Top collar Lint trap Dryer 1. Clean the dryer top surface properly before installation 2. Mark lint trap position on the dryer 3. Fix double sided foam tape on the bottom surface of the lint trap to help the lint trap stick on the top dryer 4. Connect the ducts to the collars as shown on the left diagram Clear the Lint Trap Pull out the screen, clear the lint on the mesh, and then push the screen back to the housing info@ortechindustries.com www.ortechindustries.com ORTECH reserves the right to modify at any time, without notice, any or all of our product's features, designs, components and specifications to meet market changes. 13376 Comber Way Surrey BC V3W 5V9 375 Admiral Blvd Mississauga, ON L5T 2N1 1-888-543-6473 1-888-541-6474